|
|
Comparison of tank variants from reinforced concrete and prestressed concrete
Matuška, Vojtěch ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The diploma thesis deals with design and comparison of variants of cast-in-place concrete sewage tank made from reinforced concrete and pre-stressed concrete. The layout of sewage tank is rectangular. The tank is in longitudinal way divided into two chambers. The tank is not roofed and is partialy embedded in the ground. The design for ultimate limit state and for service limit state is made for both variants. There is focus on generation and development of cracks in service limit state. For calcuation of internal forces is used model made in software SCIA Engineer, based on finite element method. The reinforced concrete and pre-stressed concrete versions are compared in last part in term of volumes of materials needed. Also there are proposed possible savings.
|
|
|
Load bearing structure of multifunctional house
Strnad, Stanislav ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
Subject of this diploma thesis is to design structural system of multifunctional building in Brno. This apartment building has 4 storey. Main load-bearing elements are concrete ceilings, columns and beams in first and second storey. In third and fourth storey are main load-bearing elements masonry and concrete ceilings with beams. Also there is prestressed beam in first storey. The structure was assessed for ultimate and serviceability limit state acording to standarts and regulation. Drawings and drawings of construction are part of the diploma thesis.
|
|
|
Cast-in-place tank of sewage plant
Kustyánová, Orsolya ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
This thesis deals with the design and assessment of all supporting parts of a cast-in-place reinforced concrete tank of sewage plant in the village Vrbice. Tha main parts of the thesis are the technical report, static analysis, drawing documentations, construction process and visualisations. Calculation of internal forces was performed by the software Scia Engineer and verified by manual calculation. The drawing documentation constists of shape and reinforcement drawings of supporting parts.
|
|
|
Analysis of cantilever of commercial building
Gric, Pavel ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
This diploma thesis is about analysis of post-tensioned cantilever beam, which is part of cantilever of commercial building. The main part of thesis is evaluation of behavior of building structure in time and determination of the most suitable staging. Next part of thesis is design and evaluation of reinforced slab and beam.
|
|
|
Information System Design
Šiška, Radek ; Koplík, Martin (referee) ; Koch, Miloš (advisor)
The contents of this bachelor thesis is an analysis of the current information system and to propose a new information system for the Miklik.eu company, which specializes in the field of selling office supplies, paper, office equipment and packaging materials, based on this analysis. The company's information system consists of the POHODA economic system and e-commerce. The main objective is their interconnection and mutual communication, especially to provide the current warehouse stock. The new information system should also offer better competitiveness of online e-commerce and lower overal the costs.
|
|
|
Supporting structure of a polyfunctional house
Reinoha, David ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The subject of this master’s thesis is the design and calculation of a five-floor multifunctional building. The building consists of flats located in floors -1 to 3, the remaining underground floors serving as a car park and the second part of the building contains spaces designated for business purposes. Each of the two flats located on each floor features a balcony. The multifunctional building contains two underground floors which are designed entirely as reinforced concrete structures and three aboveground floors designed as ceramic brickwork structure. The roof of the building is flat, not designed for walking and featuring an air conditioning unit for the entire building. A review of selected loadbearing structures of component floors was performed as a part of this thesis. The main load-bearing horizontal is composed of stiff ceilings, including the bordering ceiling of the third floor and the roof. Above-ground floors are to be constructed of pre-stretched ceiling girders Spiroll which are set onto reinforcing wreaths. Underground floors are to be constructed as a monolithic structure made of ferroconcrete. The vertical structure is constructed of perforated brick blocks for above-ground floors comprising floors 1-3, remaining underground walls are constructed of monolithic ferroconcrete. Foundation constructions are made of monolithic concrete white tub including confluence and review of the tub.
|
|
|
Design of concrete structure of industrial hall
Richtr, Jan ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The master's thesis deals with the design of a single-nave reinforced concrete prefabricated hall with a crane runway. The focus of the design and assessment is on the elements of the main transverse frame. The saddle girder, along with the columns, is assessed for the ultimate limit state (ULS) and the serviceability limit state (SLS). Another part of the design addresses the proposal of the reinforced concrete cladding made of panels. The panels are designed for the ULS under exceptional loading conditions. The master's thesis also explores the possibility of additional column prestressing with post-tensioning reinforcement and the potential installation of a crane with higher load capacity in the hall.
|
|
|
Comparison of tank variants from reinforced concrete and prestressed concrete
Vařecha, Daniel ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The thesis is focused on the design and assessment of two variants of tanks for wwtp. For comparison, a reinforced concrete tank and a prestressed concrete tank were designed. The work includes a data accompanying report for the static calculation and a technical report on the construction, static calculation and drawing documentation of shapes and reinforcement. The calculation of internal forces on the structure was performed in the SCIA Engineer 18.1 calculation software.
|
|
|
Block of flats at Vinohrady street
Dvořák, Vít ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The master´s thesis is focused on a design of monolithic reinforced concrete construction of an apartment building. The content of this work is design of two ceiling slabs, staircase, supporting columns, walls, girders and concrete pile construction of foundation. Thesis includes working-out of static calculation, elaboration drawing of shape, reinforcement of solved elements and evolvement of assembly drawings. The rest of the project parts are not analysed.
|
|
|
Cast-in-place tank
Renczes, Gábor ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The thesis deals with the design and assessment of all supporting parts of a cast-in-place reinforced concrete sewage tank in a wastewater treatment plant. The thesis includes a technical report, static analysis, drawing documentations, construction process and visualization. The drawing documentation consists of shape and reinforcement drawings of supporting parts.
|
guest ::
