|
|
Educational GPS Receiver
Cséfalvay, Gabriel ; Blansko), (Metra (referee) ; Šebesta, Jiří (advisor)
This work explicates a simple GPS receiver intended for laboratory demonsration of DSSS signal demodulation and apparent distance measurement. The receiver will be able to seek for individual sattelite signals, measure their shift against local oscillator, demodulate navigational data, display information on LCD and communicate with PC via USB.
|
|
|
Simulator for Passive Multi-Static Radar using WiFi/WiMAX
Sládek, Ondřej ; Kubíček, Michal (referee) ; Šebesta, Jiří (advisor)
This master’s thesis deals with the concept of passive multistatic radar. The radar system exploits WiFi or WiMAX transmitters as the source of radiolocation signal. The transmitters are considered non-cooperative. The master’s thesis evaluates limitations arising from utilization of WiFi or WiMAX signals. A Matlab simulator was created as a part of the thesis, which was used to verify the basic idea behind this concept. Based on the results of real-life simulations, conclusions are suggested towards a possible application of WiFi/WiMAX radar.
|
|
|
BPSK transmitter for 435 MHz
Hocz, Jan ; Šebesta, Jiří (referee) ; Urbanec, Tomáš (advisor)
This thesis deals with basics of BPSK modulation. Another part compares different integrated circuits of transmitters able to use BPSK modulation on a given frequency, the choice of suitable microprocessor and transistor. Another part describes the connection of individual integrated circuits on printed circuit board and their realization. In the following section, the software and individual commands for transmitter control are described. In the final section is the functionality checked and the basic parameters reached are presented.
|
|
|
Spatial Identification Methods and Systems for RFID Tags
Povalač, Aleš ; Carvalho, Nuno Miguel Gonçalves Borges de (referee) ; Polívka,, Milan (referee) ; Šebesta, Jiří (advisor)
Disertační práce je zaměřena na metody a systémy pro měření vzdálenosti a lokalizaci RFID tagů pracujících v pásmu UHF. Úvod je věnován popisu současného stavu vědeckého poznání v oblasti RFID prostorové identifikace a stručnému shrnutí problematiky modelování a návrhu prototypů těchto systémů. Po specifikaci cílů disertace pokračuje práce popisem teorie modelování degenerovaného kanálu pro RFID komunikaci. Detailně jsou rozebrány metody měření vzdálenosti a odhadu směru příchodu signálu založené na zpracování fázové informace. Pro účely lokalizace je navrženo několik scénářů rozmístění antén. Modely degenerovaného kanálu jsou simulovány v systému MATLAB. Významná část této práce je věnována konceptu softwarově definovaného rádia (SDR) a specifikům jeho adaptace na UHF RFID, která využití běžných SDR systémů značně omezují. Diskutována je zejména problematika průniku nosné vysílače do přijímací cesty a požadavky na signál lokálního oscilátoru používaný pro směšování. Prezentovány jsou tři vyvinuté prototypy: experimentální dotazovač EXIN-1, měřicí systém založený na platformě Ettus USRP a anténní přepínací matice pro emulaci SIMO systému. Závěrečná část je zaměřena na testování a zhodnocení popisovaných lokalizačních technik, založených na měření komplexní přenosové funkce RFID kanálu. Popisuje úzkopásmové/širokopásmové měření vzdálenosti a metody odhadu směru signálu. Oba navržené scénáře rozmístění antén jsou v závěru ověřeny lokalizačním měřením v reálných podmínkách.
|
|
|
Design of synchronous switched-mode power supply for automotive
Sedlák, Jakub ; Šebesta, Jiří (referee) ; Kubíček, Michal (advisor)
This bachelor´s thesis deals with the DC/DC convertors and their application in automotive lighting. In first part of thesis, there are mentioned DC/DC convertors, their basic topologies and synchronous rectification. In next part of thesis, there are compared selected integrated circuits, which are suitable for this application. For one of these circuits is created a design. For this design was created a simulation to find out, that design is working. This design was realized and was tested according to automotive standards. In the end, there is a working DC/DC convertor, which meets requirements and basic limits from automotive standarts.
|
|
| |
|
|
SWR and HF power monitor
Gajdušek, Miroslav ; Blansko), (Metra (referee) ; Šebesta, Jiří (advisor)
This work deals with analysis methods continuous measuring systems for measurement standing wave ratio and high frequency power. Reflectometr, provision measuring standing wawe ratio, works in range frequence VHF (145 MHz, 443 MHz), for this width working frequence is used construction reflectometer with directive lead. Measurer HF power works into range 1kW. Further is in work go through problems communications bus for transmission data from unit monitor SWR a HF power into score modulus. With regard to high frequency interference is choice serial communication RS-485 , which is immune against disturbance. Further is designed evaluation unit MASTER, unit SLAVE and modules for measurement power and SWR. In finish is build up the firmware for units.
|
|
|
Duplexer for the frequency band 5.6 GHz
Opletal, Prokop ; Tkadlec,, Roman (referee) ; Šebesta, Jiří (advisor)
The aim of this master’s theses was a designing of duplexer working in non license frequency band 5.6GHz. The theses is concerning with selection of suitable concept for a given duplexer, with creating a model in software for simulation of distribution of electromagnetic field and with subsequent implementation of duplexer and verifying its parameters.
|
|
|
Vaporiser
Vrabec, Miroslav ; Šebesta, Jiří (referee) ; Fedra, Zbyněk (advisor)
The subject of bachelor’s thesis is the vaporisers. Vaporisers are very popular thanks them ability to extrakt pure herb essences without many undesired products. The aim of this project is design selection parts of vaporisers, eventually choiced acceptable components for them function.
|
|
|
Control Unit for VHF Radio Receiver with Frequency Synthesizer
Sobotka, Martin ; Šebesta, Jiří (referee) ; Vyskočil, Pavel (advisor)
The aim of this work is to propose the involvement of the control unit for receiving VHF radio and its practical implementation. Adding a panel on the appropriate tuner unit leads to a complete receiver to receive radio broadcasts. My work is to focus on two frequency bands: VHF band for broadcasting and VHF band for air radio communication. This paper describes a process of selection of component, their description and integration into a complete circuit, a description of the control program for the microcontroller and a description of control device. Scheme and the draft for the manufacture of printed circuit board is attached.
|
guest ::
RSS feed.