|
| |
|
|
Apartment Building
Zemánek, Petr ; Pilík, Václav (referee) ; Struhala, Karel (advisor)
The subject of this bachelor's thesis is a design of an new apartment building in Bystřice nad Pernštejnem. It is a three-storey building situated on a slightly sloping terrain. The building is detached. The entrance is from the north side, where is an existing acess road. There are 4 same house units in the apartment building. The building is made of ceramic brick blocks. The ceilings are made of prestressed reinforced concrete panels and reinforced concrete prefabricated elements. The roof is flat, single-skinned, green and with a constant inclination. This work contains documentation of the real execution.
|
|
|
Apartment Building
Švecová, Michaela ; Pilík, Václav (referee) ; Struhala, Karel (advisor)
The subject of this bachelor thesis is making the project documentation for construction of an apartment building in Vysoké Mýto. The apartment building is located on the western outskirts of Vysoké Mýto, in the residential area. It is a free-standing, three-storey, non-basement building with six housing units on the second and third floor. There are technical premises and four garages on the first floor. On the east side of the building, there is a parking lot and entrances to the individual garages. The vertical structural system of the building is made of Porotherm ceramic blocks. The building is insulated by a contact thermal insulation system with EPS insulation. Horizontal structures are made of reinforced concrete monolithic ceilings. The balcony boards are made of monolithic reinforced concrete with using ISO-supports. Vertical movement is possible through a staircase that is made of monolithic reinforced concrete or through the lift which is stored in a self-supporting shaft from monolithic reinforced concrete. The building is based on drilled piles in interaction with reinforced concrete foundation strips. The roof is flat, green in combination with pea gravel. The project was designed with a respect to current development in the area and with emphasis to the regulations. Parts of the work are schemes of technical equipment of buildings in the object and reviews of construction physics, in particular thermal technics, acoustics, insolation and lighting. The following programs were used: AutoCAD 2018, AutoCAD 2021, ArchiCAD, Teplo 2017, Světlo+, Building Designe, Microsoft Word, Microsoft Excel, Microsoft Publisher, Hluk+.
|
|
|
Detached house on a slope
Špás, Jan ; Pilík, Václav (referee) ; Utíkalová, Ivana (advisor)
The thesis deals with the design of the detached house as the design documentation for the construction. The building plot is located in Chrudim and it is steeply sloping over the Chrudimka river. Despite the height difference on the plot, the aim of the design was to maximize connection between the interior and the garden and at the same time place the office, garage and sauna inside. The house is three-storey building, where northern and eastern walls of two of these storeys are below ground level in order to take advantage of earth-sheltered houses. The entrace floor (ground floor) is covered with mono-pitched roof. The substructure is made of waterproof reinforced concrete with the vertical walls mostly made of the sand-lime blocks. The floor slabs are designed as monolithic reinforced concrete structures. The design documentation includes assessment in terms of fire safety and building physics.
|
|
|
Detached house with studio
Drápelová, Lenka ; Pilík, Václav (referee) ; Utíkalová, Ivana (advisor)
The aim of this bachelor thesis is to present a design of a new detached house with an establishment, which is situated in the village Měřín. The residential building is designed for a family of four members, and it is about two-storey, partly basement object. This section is connected with a single – storey building with functions of garage and establishment. The establishment will be used as a design studio. The detached house has a saddle roof. The roof of the garage and the establishment is designed as a flat roof. In front of the object, there are two parking spots for customers. The structure will be based on concrete foundation strips; load bearing masonry is designed of Ytong blocks. Ceiling structures consist of monolithic constructions.
|
|
|
Apartment building in Hutisko - Solanec
Šrámek, Jakub ; Pilík, Václav (referee) ; Bantová, Sylva (advisor)
The bachelor’s thesis focuses on the topic an apartment building in the village Hutisko-Solanec and it is processed in the form of documentation for the execution of constructions. The building contains five units 3+ kk, one unit 2+ kk and two units 1+ kk. The building is in the shape of a simple rectangle with three above-ground and one underground floor. A structural system of the building is brick, combinened and consisted of a permanent formwork in the underground floor and in the above-ground floor is clay masonry of the type THERM. A floor structure is designed as cast-in-place reinforced slabs. The building is roofed by saddle and pitched roof. The building is completely insulated with the ETICS system.
|
|
|
The block of flats
Kubíček, Jan ; Pilík, Václav (referee) ; Benešová, Romana (advisor)
This bachelor's thesis is focused on construction of an apartment building in quiet area of the town of Prostějov. Its appearance and purpose fit into the surrounding buildings. The free-standing object is a partially basement, it has parking space and approximately shape of rectangular. The apartment building is designed as a 4-storey building with one underground floor. There is a separate cellars for each of apartment unit in the basement. There are sixteen residential units in four floors, always 4 residential units per floor. Flat units have its own entrance to private terraces on the ground floor and to balcony in upper floors. The building is based on concrete foundation strips and is covered with a warm flat roof. The load-bearing system is a two-way wall system and is lined with ceramic blocks. Horizontal structures are cast-in-place reinforced cncrete. The vertical connection is ensured by a three-arm staircase that wraps around the elevator shaft. The work is developed to the level of project documentation for the construction.
|
|
|
Small apartment house
Helekalová, Michaela ; Pilík, Václav (referee) ; Bantová, Sylva (advisor)
The subject of the bachelor's thesis is the design of an apartment building in Holešov. The building plot is located in parts of the town of Holešov. The building is designed as suitable for accommodation and has three floors above ground and one underground. In the upper floors there are 8 residential units. In the underground floors there is a carriage house with a bicycle shed, a boiler room, a room for air conditioning, a storage room, a cleaning room and a cellar. The building is based on basic passports. The perimeter masonry of the above-ground floors is made of ceramic blocks and the underground floors are made of lost formwork. The ceilings are made of ceiling panels. The floors are connected by a two-armed reinforced concrete staircase. The roof is saddle, double-skinned from trusses.
|
|
|
Apartment building Polička
Boušková, Zuzana ; Pilík, Václav (referee) ; Brzoň, Roman (advisor)
This bachelor thesis encompasses project documentation of build execution of a new apartment building. Designed building is located on the southeastern OKRAJI of Policka in a newly built location. The apartment building is designed as a detached building with three above-ground and one underground floor in a flat terrain. The building has a total of 9 residential units with layouts of 3 + KK, 2 + KK and 1 + KK. All apartments except the barrier-free have a terrace or loggia and each apartment has a cellar located in the basement of the house. In the basement there is also a technical room, workshop, bicycle and carriage house and a common room. The apartment building is based on reinforced concrete foundation strips. The vertical load-bearing structures are designed from ceramic blocks, in the basement from lost formwork. The ceiling structures are monolithic reinforced concrete slabs. Perimeter masonry above ground level is insulated with the ETICS contact thermal insulation system. The roofing of the building is solved by flat roofs, while above the 2nd floor it is a vegetation roof with a terrace, above the 3rd floor there will be a non-walkable flat roof with a waterproofing layer made of asphalt strips.
|
|
|
Housing for Seniors
Pilík, Václav ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The diploma thesis is elaboration of project documentation of the object Housing for seniors in Brno - Dolní Heršpice. The site is located un the area with the planned development of the city. The object is detached, three-story with a partial basement. The building is divided into five parts. The building is based on concrete foundation pads and strips. The structural construction is a combined column and wall system in technological design as monolithic concrete. The building is designed as a low energy building, with contact insulation (ETICS). The whole building is designed with forced air exchange. An extensive and intensive walkable flat roof is designed. The aim is to create small, barrier-free, community housing with affordable services and support, with a possible life expectancy. Services for the elderly with reduced self-sufficiency and with mild health and mental dysfunctions are considered. The building is equipped with space for accommodation with a capacity of 48 beds, space for eating with a separate kitchen, space for leisure and physical activities, space for basic health and social care and space for administrative and technical facilities. The construction is divided into several buildings, the subject of the thesis is primarily the solution SO.01 - Housing for seniors
|
guest ::
