|
|
Family house with facilities for forest management in Pacov
Samec, Petr ; Klubal, Tomáš (referee) ; Brzoň, Roman (advisor)
The bachelor’s thesis is a project documentation for the realization of building of a family house with an establishment – hinterland for a forest management. The building is located on the border of the town Pacov in the region Vysočina. There is a technical room and stocks in a basement. Administrative premises for a forest management are located on the first floor. A service apartment for a forest administrator is designed in an attick. The family house has a rectangular ground plan and has a gabled roof. The building is walled with lime-sand blocks with contact insulation. The roof of the building is designed from a burnt roofing material.
|
|
|
Integration of phase change materials in building structures
Klubal, Tomáš ; Šťastník, Stanislav (referee) ; Solař,, Jaroslav (referee) ; Ostrý, Milan (advisor)
The thesis deals with the integration of phase change materials (PCMs) into building structures. The basic requirement is improved thermal stability during the summer season without using an air conditioner. This can be achieved by increasing the thermal storage capacity of the building structures. If the thermal capacity cannot be increased on the level of weight, phase change materials can be used. These materials are capable of storing latent heat and thus increasing the thermal storage capacity of the building. In the thesis the phase change materials were investigated in a thermal incubator by thermal analysis and, above all, in full-scale experiments using comparative measurements. The comparative measurements were carried out in two attic rooms at the Faculty of Civil Engineering, Brno University of Technology, where in one was used as a reference and the other for the experiment. Manufactured heat storage panels were installed in the experimental room. These panels are composed of a base plate; the capillary tubes placed on it are coated with modified plaster. The gypsum plaster is modified with micro-capsules paraffin for improving the thermal storage capacity. This system is connected to a thermal air-water pump, by which the storage panels can be additionally cooled or heated. In the experimental measurements, different operating modes were investigated and their effect on the indoor environment was evaluated. Thermal storage in PCMs dampens the temperature amplitude in the building during the summer season and, at the same time, allows the stored heat to be discharged during the night. Moreover, the time interval of withdrawing electric energy from the supply mains is much shorter than in the case of air conditioning. A conventional air conditioner must operate simultaneously with the thermal load, i.e. at the time of peak consumption of electric energy. Thanks to the set regimes, the installed system is capable of responding to external thermal condit
|
|
|
Polyfunctional residential building in Slatina
Náprava, Lukáš ; Klubal, Tomáš (referee) ; Brzoň, Roman (advisor)
The aim of the thesis is to design and evaluate a new multipurpose apartment building in Slatina. The object, which includes a parking lot, will be used for housing and recreational/sport purposes. The thesis also deals with basic evaluation of the object from the point of view of construction physics, fire safety and structural stability. The building is designed as a detached construction with graded floors. There is one ground floor and four elevated ones. The entire object is mirror-symmetrical on a transverse axis. The ground floor is designated to include a storage area of the apartment building, mechanical rooms and sanitary facilities of the fitness centre. The fitness centre itself is located on the first floor, along with a gym, administrative area and two special-purpose apartments. The remaining floors are intended for housing purposes. Wall construction system has been chosen for the object. The ground floor is based on a foundation plate made of watertight concrete („bílá vana“) while the supporting system is constituted by reinforced concrete walls. All ceiling constructions are constituted by monolithic plates made of reinforced concrete. Peripheral and inner supporting walls of the upper floors are lined with ceramic blocks HELUZ. Inner communication network consists of prefabricated reinforced concrete staircase and an elevator shaft. Roof construction consists of a flat DUO roof and a green roof.
|
|
|
Apartment building in Humpolec
Dědic, Vojtěch ; Klubal, Tomáš (referee) ; Brzoň, Roman (advisor)
Master thesis of "APARTMENT BUILDING IN HUMPOLEC" is composed in the form of project documentation. The building is designed as a dweling house and it is situated in the centre of Humpolec city. The building has four floors and no basement. Supporting structure consists of a ceramic masonry and concrete elements. The drawings are processed in ArchiCAD program.
|
|
|
Family house with hairdresser´s in Humpolec
Kříž, Tomáš ; Klubal, Tomáš (referee) ; Brzoň, Roman (advisor)
This bachelor’s thesis deals with the design documentation of the family house with hairdresser´s in Humpolec that is designed for a family of four. The house is situated in the Vysočina region in the village Humpolec, catastral district Humpolec. The building is designed as a two storey brick building, where vertical and horizontal constructions are designed from the structural system Porotherm. The building is covered with three flat roof decks at different height levels where one is growing, one is walkable and one is not walkable.
|
|
|
Detached house in Přibyslav
Sobotka, Martin ; Klubal, Tomáš (referee) ; Ostrý, Milan (advisor)
The bachelor´s thesis is processed on single-family house with an establishment. This work deals with designing an appropriate layout, design and architectual solution to not disturb the existing appearance of the lokality. It´s about a new insulated house with hairdresser´s, which is designed in parcel 981/87 cadastral areas in Přibyslav, that is located in the built-up area of newly built houses at the intersection of stress Podrázského and U Koupaliště. The habitable part of the house has two floors. It has ground floor, floor and attic. The roof above the living area is a gabled roof. The establishment has one floor, designed to be accesible to persons with reduced mobility and orientation. Over the establishment part is extensit green roof accesible from the attic. The building has also garage parking for two vehicles in the basement accessible from the street U Koupaliště.
|
|
|
Family house with relaxation center
Veselý, Tomáš ; Klubal, Tomáš (referee) ; Brzoň, Roman (advisor)
The Bachelor thesis topic is a project of a detached house with relax center. The house is designed as two storey basementless brick building with a pitched roof. The 4 bedrooms layout fulfills the design for 4 family members. The relax center is builded from twoo workers and fours customers. The entrance is situated in the northwest part of the house. From which we get into the hall of which is open to the kitchen and living room, staircase room, utility room and WC. On the second floor there are two children's bedrooms, bathroom, WC and livingroom. All of the bedrooms are enterable form the hall and have southern view. In the relax center are twoo masage room with shower, room from workers and the toilets. There is garage and one place under roof from parking twoo cars. It is a brick building of systém YTONG. The roof is supported by VEDAFORM.
|
|
|
Family house with a desing office
Šrůta, Otto ; Klubal, Tomáš (referee) ; Brzoň, Roman (advisor)
The point of this bachelor´s thesis is the project of a family house with establishment (desing office) and it contains the complete documentacion for the execution of the project. This building is situated in the region Vysočina, the village Věž. It is a two-storey family house and it is projected for 4-5 people. The design office is designed as single-storey. The bulding is cellarless. The building plan uses the load-bearing vertical structure of keramic Heluz. There is used the contact thermal insulation system, the mineral wool TF Profi is used as insulation. The horizontal structures are made from the beams HELUZ MIAKO and insert HELUZ MIAKO. The family house is covered with a mono-layer flat roof.
|
|
|
A family house with flower shop in Humpolec
Kubíčková, Žaneta ; Klubal, Tomáš (referee) ; Brzoň, Roman (advisor)
The point of this bachelor´s thesis is the project of a family house with establishment (flower shop) and it contains the complete documentacion for the execution of the project. This building is situated in the region Vysočina, the town Humpolec. It is a two-storey family house and it is projected for four people. The flower shop is designed as single-storey. The bulding is cellarless. The building plan uses the load-bearing vertical structure of sand-lime bricks SENDWIX. There is used the contact thermal insulation system ETICS, the mineral wool Rockwoll Fasrock LL is used as insulation. The horizontal structures are made from the tensioned ceiling panels Spiroll and a reinforced concrete slab. The family house is covered with a mono-layer flat roof and the flower shop is covered with a vegetation extensive roof.
|
|
|
Polyfunctional residential building in Slatina
Náprava, Lukáš ; Klubal, Tomáš (referee) ; Brzoň, Roman (advisor)
The aim of the thesis is to design and evaluate a new multipurpose apartment building in Slatina. The object, which includes a parking lot, will be used for housing and recreational/sport purposes. The thesis also deals with basic evaluation of the object from the point of view of construction physics, fire safety and structural stability. The building is designed as a detached construction with graded floors. There is one ground floor and four elevated ones. The entire object is mirror-symmetrical on a transverse axis. The ground floor is designated to include a storage area of the apartment building, mechanical rooms and sanitary facilities of the fitness centre. The fitness centre itself is located on the first floor, along with a gym, administrative area and two special-purpose apartments. The remaining floors are intended for housing purposes. Wall construction system has been chosen for the object. The ground floor is based on a foundation plate made of watertight concrete („bílá vana“) while the supporting system is constituted by reinforced concrete walls. All ceiling constructions are constituted by monolithic plates made of reinforced concrete. Peripheral and inner supporting walls of the upper floors are lined with ceramic blocks HELUZ. Inner communication network consists of prefabricated reinforced concrete staircase and an elevator shaft. Roof construction consists of a flat DUO roof and a green roof.
|
guest ::
