|
|
Panda & panda
Kocmanová, Michaela ; Kalánek, Ing Jiří (referee) ; Brzoň, Roman (advisor)
This diploma thesis presents a project documentation for construction of a zoo pavilion with a restaurant. The structure has to be designed in compliance with regulations for buildings with almost zero energy consumption. Its construction site is located within the existing compound of Prague’s zoo on plot no. 1491/1. The pavilion is proposed to house giant pandas. The building has three floors- one underground and two above. It is covered by a flat green roof. In terms of circulation, the structure is composed from two parts. The first one is formed by premises for the pandas, including necessary facilities for their wellbeing and their breeding; and the second part is visitors’ part, including restaurant, gift shop and amenities. The building is enclosed by two exterior expositions for pandas which are connected with the interior exposition premises by two ramps- tunnels. There is a roof terrace adjacent to the restaurant for visitors to enjoy the view of pandas in their exterior grounds. The vertical structure of the pavilion for giant pandas is a combination of load bearing brick walls and cast-in-place concrete walls- the underground floor and the ground floor is formed by the cast-in-place concrete walls and the upper floor is formed by the brick walls made out of autoclaved aerated concrete blocks. The horizontal structures are formed by prestressed concreted floor panels or in the case of the upper floor by cast-in-place reinforced concrete slabs.
|
|
|
A Family House with Comercial Premises and a Garage
Chylík, Lukáš ; Kalánek, Jiří (referee) ; Skála, Jiří (advisor)
This bachelor´s thesis (A Family House with Commercial Premises and a Garagewas) was prepared at the level of a project documentation. It is a detached house in the village Heřmanov at Krizanov, designed as a three-storey, a basement, a built-in garage house with and gable roof. The building is based on the foundation walls. Bearing and non-bearing walls are lined by Porotherm blocks. Ceiling structure consists of ceiling beams and bricks Porotherm PTO inserts Miako. The roof structure is designed as a gable truss structure which comprises two mutually perpendicular roof plane. There are proposed a garage, a clubhouse, a storage and an utility room in the basement and living rooms in the first and second floor. There is an establishment with its own bathroom and a private entrance in the first floor. A Natural ventilation and lights are made by wooden windows. Layout and paper are attached as a part of the project.
|
|
|
Guesthouse and café
Jášková, Aneta ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
The scope of this diploma thesis is design and processing of the project documentation of the guesthouse along with coffee shop. The proposed object of this thesis is located in the village Čeladná next to the golf course Prosper Golf Resort Čeladná, in the location designated for mixed constructions. One of the double-storeyed, non-cellular object with roofed surface and steep roof. The object is based on the base stripes made of plain concrete and on the reinforced concrete flaps. Carrying, perihepral and dividing walls are designed on the Velox systém. The same systém was used to design roof constructions. In the rooms with excessive width are filled with reinforced concrete columns. Part of the guesthouse and second floor of the coffee shop is designed with ventilated facade with wood paneling ThermoWood. The object is divided in two parts with common entrance section. One part of the coffee shop has ability to handle capacity of 70 guests. Part of the double-storeyed coffee shop is hygienic facilities, kitchen, room for employees, warehouse and mechanical ventilation. Second part of the object is the guesthouse with flat of the manager of the guesthouse. The guesthouse consists of room with hygienic facilities for 18 people, including barrier-free room. The rooms are divided in the first floor on separate units, the rooms with hygienic facilities and the apartments in the second floor has two rooms, kitchen and hygienic facilities. For the next parts of the guesthouse is warehouse clean and dirty laundry and shared kitchen. The whole first floor is designed as barrier-free. In front of the object is the parking lot for 21 cars, which 3 of the parking places are for the cars of the disabled.
|
|
|
Pension with brewery
Gőghová, Orsolya ; Kalánek, Jiří (referee) ; Kacálek, Petr (advisor)
New building pension with brewery is situadet in town Prostejov. Object has 3 overground floors and flat roof, it has no cellar. On ground floor is situated the brewery, medium large kitchen with storages, sanitary and the restaurant. Kitchen is designed for preparing 150 meals, capacity of restaurant on the ground floor is 81 place and on the galery is 70 . On this floor has been situated room for invalids also. On the further floors are rooms for guests and technical area for air design system.
|
|
|
Family house with an establishment
Vrána, Tomáš ; Kalánek, Jiří (referee) ; Daněk, Lukáš (advisor)
The main objective of this bachelor's thesis is making the project according to technical standards, laws, technical regulations for building construction. Documents determine urban, architectural and engineering solutions, description of constructions and required information about the buildig, plans for implementation. The task of this thesis is project documentation according to solution for building construction of detached house with service establishement. The drawings were executed in AutoCad. The house is designed for year-round occupancy. This building is realised without a basement and has two floors. For the realisation of this project covered with a hipped roof we use the system Porotherm,.
|
|
|
Family house with an establishment
Rohlena, Jan ; Kalánek, Jiří (referee) ; Daněk, Lukáš (advisor)
The present bachelor’s thesis processes a design of a newly-built single-family house in the city of Hradec Králové. The design is concerned with a detached two-storeyed building without cellar, a design studio, and a garage for one car, which constitute one complex. The house is designed for a family of four members. The structural system of POROTHERM clay blocks was chosen for the designed building. The floor structure is created with reinforced concrete slabs. The thermal insulation is provided by the ventilated facade. The insulated cladding system is made of fibre cement boards CEMBRIT and timber parallelograms. The whole building is roofed with a flat roof.
|
|
|
Office building with retail space Žilina
Hubocká, Zuzana ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
Master project is dedicated to design nearly zero-energy office building with retail spaces in Žilina. The first part deals with architectural – building design. Building is designed for the plot nr. 7011 with flat surface and there is no other building. The building has three above-ground floors and one underground floor. Retail spaces are on the ground floor. The building is constructed on foundation strips and pads. The building is made of combined load-bearing structural system of reinforced concrete columns and external walls. External load-bearing structures of above ground floors are designed from reinforced concrete and Ytong system supplemented by ETICS made of mineral wool. Underground walls are made from watertight concrete. Floor slab structures are made from reinforced concrete. The building is covered with green warm flat roof. The second part deals with building interior installation. The primary source of heat, coldness and hot water is the heat pump. Ventilation in the building is provided by heating, ventilating and air conditioning (HVAC) units. The third part of the thesis includes the design and assessment of the photovoltaic power plant in terms of economics and ecology. The project was carried out in the AutoCad system. All structures comply with the valid standards and regulations.
|
|
|
Office building in Prague
Ignatyeva, Anastasia ; Kalánek, Jiří (referee) ; Ostrý, Milan (advisor)
The content of the diploma thesis is the elaboration of the project documentation for the construction of the administrative building. The building is designed in Prague Holešovice. The administrative building is part of the complexes of three administrative buildings with two common underground floors, which have technical premises and a parking space. On the above floors there are office and commercial premises. The construction system of the building is a reinforced concrete monolithic skeleton. As cladding was used glass facade. The roof of the building is flat.
|
|
|
Multipurpose facility Olomouc
Spurný, Martin ; Kalánek, Jiří (referee) ; Eliáš, Luboš (advisor)
The subject of the project is a new multipurpose facility building in the cadastral area Nová Ulice, the city of Olomouc, district Olomouc. The house is a detached building on Zirmova street follow on Mošnerova street. In this street has a few residential houses, which have affected some of the parameters of the object. In particular, this is the position, number of floors and the size of the balcony. The building has five storey, one under-ground and four above ground. In the basement there are storage facilities and machinery space elevator. In the first floor is designed to place the Café and handicapped-accessible apartment. In the second and third floors are two 3-room and one 2-room apartments and in the last floor are two three-bedroom apartments. On each floor of the Chamber for each apartment can be accessed from the corridor. Furthermore, each apartment has a balcony accessible from the living room. The roof is flat, with aggravating layer of fluvial gravel. Parking is provided in the immediate vicinity of the object in the parking lot.
|
|
|
Block of flats in Třebíč
Carda, Vojtěch ; Kalánek, Jiří (referee) ; Ostrý, Milan (advisor)
The content of this thesis is to design four storey block of flats. The house is supposed to be passive. The building is four storey basement, roofed hipped roof, with flat roof operation served as a terrace. The building is located on a plot of number 1037/28 in the village Trebic, cadastral area Trebic. Supporting structures of the house are made of monolithic reinforced concrete frame with masonry infill of clay brick blocks THERM. The building is insulated contact insulation system EPS boards. The roofing is done using a timber truss. The house is based on the base plate. The project includes a seminar work assessing thermal technical and acoustic properties of structures.
|
guest ::
