|
|
The design of reinforced concrete ceiling
Burda, Patrik ; Zlámal, Martin (referee) ; Švaříčková, Ivana (advisor)
The bachelor thesis is focused on the static solution of monolithic reinforced concrete continuous ceiling and a beam in a single family house. The entire structure of ceiling is designed of reinforced concrete. Software Dlubal RFEM is used to determine the effects of load. It works with the finite element method. Assessment of elements is according to the first limit state and also the second limit state. The thesis includes statics calculation, dimensioning of reinforcement, drawing of shape and reinforcement drawings of solved elements.
|
|
|
Static solution of monolithic reinforced concrete structure
Kunčík, Martin ; Švaříčková, Ivana (referee) ; Zlámal, Martin (advisor)
Bachelor´s thesis deals with statical solution of the office building structure. The subject of the solution is a reinforced concrete monolith- frame construction. It consists of a ceiling board, rungs, beams, columns and footings. Assessment of construction is carried out for all assessed elements considered for first limit state – carrying capacity and the rungs on the second limit state - usability.
|
|
|
Design of Monolithic RC Structure
Kuchař, Martin ; Zlámal, Martin (referee) ; Švaříčková, Ivana (advisor)
The bachelor’s thesis describes the design of the load-bearing part of the reinforced monolithic frame concrete structure of the home for the elderly. The subject of assessment are the typical elements of the load-bearing skeleton in the 1st floor: frame rung PS, beam T5, column SR3a and the ceiling plate above the first floor. The assessment is made for ultimate limit states, moreover for frame rung PS the deflection control is provided, too.
|
|
|
Design of selected parts of RC and masonry structures
Neužil, David ; Šulák, Pavel (referee) ; Švaříčková, Ivana (advisor)
Bachelor thesis describes the design selected part of reinforced concrete and brick construction on building of wine cellar and elaboration of reinforcemenet drawings of selected structural element. Building is decided to two parts entrance building and wine cellar. At the entrance are designed and assessed reinforced concrete perimeter walls, columns and beam which is situated on columns. In the cellar was assessed ceiling formed by a brick vault which failed to report and was designed rehabilitation using reinforced concrete reverse shell. Calculation of internal forces was performed by computer program SCIA Engineer.
|
|
|
Reinforced concrete structure of a multistoried garage
Klajba, Daniel ; Švaříčková, Ivana (referee) ; Šulák, Pavel (advisor)
The aim of bachelors’s thesis is to design monolithic reinforced concrete ceiling structure of a typical storey of a multistoried garage. The supporting structure consists of a frame consisting of rungs, which are stored by beams and slab. Rungs are supported by columns. Reactions of the structure are transmitted to the foundation soil by footings. The design was made according to standard ČSN EN 1992-1-1 for ultimate limit state. Structural analysis was performed using Scia Engineer 2012 – Student version. The results were validated by simplyfied manual method. Structure was modeled using Scia Engineer 2012 also in 3D together with second option of ceiling structure – locally supported plate. Comparison between these two variants was made.
|
|
|
Design of waste water tank
Konečný, Vlastimil ; Šulák, Pavel (referee) ; Švaříčková, Ivana (advisor)
Aim of the bachelor's thesis is to design reinforcement for waste water tank. Another part of task is to do examine for limit state of cracks. Tank is examined for Capacity limit state and Applicability limit state - Limit state of cracks. To determine the effects of internal forces is used calculation software Scia Engineer 2011.1. Calculation is performed by two methods. The first method is to assign subsoil with manual calculation and the second one is to assign subsoil layers with module Soilin which generates loads and another parameters. Outputs from the methods of calculation were used for comparison of results and design reinforcement for Capacity limit state and Applicability limit state. According to Applicability limit state – Limit state of cracks is prescribed limitation of cracks width to limit width wk = 0,2 mm by EC 1992-1-1.
|
|
| |
|
|
Reinforced Concrete Frame - Design of Selected Part of the Building
Hardubej, Martin ; Zlámal,, Martin (referee) ; Švaříčková, Ivana (advisor)
The thesis is focused on an assessment of existing structures at the four-storey apartment building. The supporting system design consists of a monolithic reinforced concrete skeleton. The subjects of assessment are girders, columns, beams and continuous slab. Another part of the project focuses on the design for reconstruction of nonconforming elements, which are the girders and beams. The work includes the development of structural analysis and reinforcement drawings of reconstructed elements.
|
|
|
Proposal and Design of the Flat Plate Slab
Ducháč, Josef ; Šimůnek,, Petr (referee) ; Švaříčková, Ivana (advisor)
The Bachelor´s thesis is focused on the analysis, design and assessment of the Flat Plate Slab. The Slab is located in multifunctional complex of winter stadium. All construction is made from reinforced concrete. The thesis solves various ways to create computational models. The thesis includes working-out of static calculation, drawing shape, reinforcement drawing of the Flat Plate Slab and the elaborate comparison with computational models.
|
|
|
Design of the Timber-Concrete Composite Ceiling Structure
Válek, Jakub ; Horák, David (referee) ; Švaříčková, Ivana (advisor)
The reconstruction of existing houses is currently a frequent issue. This work deals with the possibilities of reinforcing wooden ceilings with the focus on ceiling reinforcement using an over concrete slab. This suggested ceiling reconstruction work is desirable from the point of view of the rigidity of the object in the horizontal direction. The work includes the proposition for the composite, according to various norms and their comparison regarding the economic side of the design. The work further provides a description of the experiment, its preliminary results and its comparison with the theoretical calculation.
|
guest ::
