|
|
Modeling of flow in ejector
Bílek, Martin ; Habán, Vladimír (referee) ; Štigler, Jaroslav (advisor)
This diploma thesis deals with the flow modelling in the ejector using the FLUENT software. It develops a diploma thesis created in the past, where a mathematical flow model in the ejector was created and experimentally tested. The aim of this work is to analyze the ejector calculations and to model a flow in an ejector of the same shape as in the experiment and under the same conditions, too. Another objective was to assess the influence of the throat length and to examine if the pressure in the ejector mixing chamber remains constant. Finally, the disagreement between the experimental figures and the ones gained from the mathematical model of the ejector are discussed.
|
|
|
Design of small hydropower plant for specific location.
Paštěka, František ; Rudolf, Pavel (referee) ; Štigler, Jaroslav (advisor)
This master's thesis is specialised in designing of small hydropower plant for specific location. In work should be designed suitable turbine for parameters found on the site, then created a basic project documentation of small hydropower plant with all devices and used principles, so that the plant would be capable of operation. In the next part of thesis should be extented the calculation of flow in the turbine delivery and assessed effect of geometry of turbine delivery on the flow.
|
|
| |
|
|
Experimental verification of ejector and creation of mathematical model.
Strmiska, Michal ; Štigler, Jaroslav (referee) ; Habán, Vladimír (advisor)
This diploma thesis deals with the area of ejectors. In the intoduction, an ejector is classed as an hydraulic machine. There is also an introduction of the principle and application of this machine there. The next part describes two different ways of calculation and there is a suggestion how to get characteristics, that were achieved by calculation in MS Excel, projected. The purpose of this diploma thesis is to confront this mathematical model with the experiment done in school laboratory at Kaplan department of hydraulic machines. The description of this experiment and the evaluation procedure of measured values is described in the final part of this diploma thesis.
|
|
|
The Operating Point of the Centrifugal Pump.
Konečná, Kateřina ; Haluza, Miloslav (referee) ; Štigler, Jaroslav (advisor)
Target of diploma thesis The Operating Point of the Centrifugal Pump was create program for analyze system of pumps, it would be an effective instrument at projection these systems. Program is divided into two parts: system characteristic and performance characteristic. Subject of this thesis is create pumps database, enter performance characteristics and succeeding working with them. Program enable regulation pump with change speed and cooperation two pumps, work in parallel or series. The result of program is project system of pumps on enter parameters with more economy work.
|
|
|
The Operating Point of the Centrifugal Pump.
Maléř, Pavel ; Haluza, Miloslav (referee) ; Štigler, Jaroslav (advisor)
The diploma thesis has a target to create a computer program that will serve as help for an evaluation of the system of pumps (The Operating Point of the Centrifugal Pump). The computer program is intended above all designers, but it will find its using in the sphere of education. The main computer program has two partial programs: System characteristic and Performance characteristic. The main point of this diploma thesis is create partial computer program: system characteristic. Other target is creating the main program and finding The Operating Point of the Centrifugal Pump. Other parameters are power efficiency, flow, specific energy for pump or pumps. These parameters are important for correct and economical proposal.
|
|
|
The design of fountains system
Müller, Patrik ; Štigler, Jaroslav (referee) ; Haluza, Miloslav (advisor)
The goal of this thesis is to design the fountain system. Nozzles have to squirt to the same height. Flow has to be the same on each nozzle and it has to be done for our given dimensionsThe right pump has to be chosen, but it cannot be done without proper knowledge of theroy of hydrodynamic resistence, basic hydromechanics and characteristics of the valves.
|
|
|
Hydrobike - feasibility study
Kunovský, Lukáš ; Kárník, Jan (referee) ; Štigler, Jaroslav (advisor)
This bachelor thesis presents a project of hydraulic system which is intended specifically for bicycle drive and is realized through hydrostatic transducers. It gives information about necessary components and about the procedure of their selection. In this procedure it focuses particularly on weight reduction and loss minimization. Apart from the considerations as such, it also analyzes prior concepts and adopts suitable improvements from these. In the presented plan it demonstrates a method of effective verification of the real parameters of the whole as well as of the partial components.
|
|
|
Water wheels
Klezla, Vojtěch ; Štigler, Jaroslav (referee) ; Haluza, Miloslav (advisor)
Water wheels are the topic of this bachelor thesis, which is divided into three parts. The first one describes a history of water wheels. The second part is focused on different types of water wheels and basic part of water construction. In the last part is concept and calculation of overshot bucket water wheel and adjustment of the parameters of Poncelet water wheel.
|
|
| |
guest ::
