|
|
Vacuum tube audio amplifier
Hrubý, Ondřej ; Šandera, Josef (referee) ; Musil, Tomáš (advisor)
This bachelor´s thesis deals with a design and simulation of an audio power amplifier using vacuum tubes to process a phono level signal. The frequency response of suggested solution should comply with the norm specified by RIAA. It also describes a principle of usage a magnetodynamic pick-up, reproduction quality requirements, vacuum tube basic description and also its advantages for audio applications usage. Last part contains a comparison of the vacuum tube and semiconductor amplifier considering signal distortion of the active elements.
|
|
|
Data logger
Albert, Matej ; Šandera, Josef (referee) ; Šteffan, Pavel (advisor)
This bachelosr’s thesis is about designing and construction of data logger for laboratory purposes. The goal is to construct such a station with possibility to connect multiple wireless sensors, with ability to measure various data, like temperature, humidity or pressure. The wirelles sensor will be powered by battery. The station will be operated remotely, for example from personal computer.
|
|
| |
|
|
Electronic attendance book
Nezval, Tomáš ; Macháň, Ladislav (referee) ; Šandera, Josef (advisor)
This Master’s thesis deals with analysis of available identification chips and the design electronic attendance book that these chips will use and store the measured information to a file on a memory card. One of the tasks is to compare different kinds of identification cards and chips, and select the most appropriate type for the implementation process. Additionally, the work described the FAT file system, which is used for data storage card.
|
|
|
Digital clock and thermometer with matrix display
Kerndl, Michal ; Stehlík, Jiří (referee) ; Šandera, Josef (advisor)
There is suggestion of obtaining exact time and temperature in this work, based on DCF signal and SMT160 temperature sensor. This project is based on LED matrix display wich is ready-to-connect module. Layout of this work is designed schematic and board layout wich can be used to produce working prototype. This prototype have been created and tested in practice.
|
|
|
Investigation of high voltage influence on different materials in high and low vacuum
Šedivý, Matúš ; Šandera, Josef (referee) ; Hejátková, Edita (advisor)
The beginning of this thesis contains an overview of properties of the insulators, and description of insulators that were used for in depth research of surface breakdown in vacuum. Furthermore, this work focuses on mechanisms of an electric breakdown initiation at the interface of the solid insulator and surrounding low pressure gas. Multiple methods for measurements of dielectric strength are examined. The experimental part describes the measurements performed in the vacuum chamber. The results of these measurements are then analysed. In conclusion, used insulators are compared and suggestions for further work are given.
|
|
|
Electronic information card
Šafář, Viktor ; Kadlec, Jaroslav (referee) ; Šandera, Josef (advisor)
Tato diplomová práce se zabývá návrhem elektronického informačního štítku, jehož základem je maticový LED displej. V teoretické části jsou probrány použitá rozhraní a periferie mikrokontroléru a PC a diskutuje se nad možnostmi kódování českých znaků. Dále se probírá krok za krokem návrh zařízení. Nejdříve jsou vytyčeny hlavní požadavky a funkcionalita zařízení, následuje výběr vhodných komponent a je navrženo elektrické schéma. Jádrem zařízení je mikrokontrolér Microchip PIC, pro který je dále navržen program. Nakonec je popsána a naprogramována aplikace pro MS Windows, která se se zařízením komunikuje.
|
|
| |
|
|
Battery charger for NiCd and NiMH batteries
Drda, Václav ; Šandera, Josef (referee) ; Háze, Jiří (advisor)
The work deals with design of self-contained NiCd and NiMH battery charger using switch-mode operation. The procedure of solution was proposed and based on defined characteristics of charger. The basic aim of the proposal is to obtain maximum utilization of parameters and life of the batteries. The other requirement is ability to diagnose defective of the batteries (short-circuited, disconnected and different capacity than other batteries). The simulation and partial tests served to fabricate the charger. Function was tested in laboratory.
|
|
|
Interconnection Technologies for 3D Electronic and Microelectronic Constructions
Nicák, Michal ; Pietriková,, Alena (referee) ; Starý, Jiří (referee) ; Šandera, Josef (advisor)
The doctoral thesis is focused on research on application possibilities of soldered interconnection structures especially for the use with innovative 3D structures assembled using the LTCC ceramic materials, PVD deposited and galvanically modified pads, solid core solder balls. It consists of several main parts. Introduction is followed by theoretical survey of current situation and technologies. Thesis continues with introduction of main goals and with summary of successively performed experiments and their results. End of the work belongs to summary of results and gained knowledge.
|
guest ::
