Národní úložiště šedé literatury Nalezeno 61 záznamů.  začátekpředchozí52 - 61  přejít na záznam: Hledání trvalo 0.02 vteřin. 
Monitoring of Pressure Pulsations in the Hydraulic System of the Stator Current Signature Induction Machine
Kroupa, M.
This paperis focused on monitoring and evaluation of pressure pulsations in the hydraulic system, which includes a hydrodynamic pump. The entire system is driven by an induction machine. The goal of this paper is to accurately determine pressure pulsations by measurement of elecrical variables of an induction machine.
Influence of Third Space Harmonic on Properties of Five-Phase Induction Machine
Schreier, Luděk ; Chomát, Miroslav ; Bendl, Jiří
The paper deals with the necessity to consider higher space harmonic waves of a current layer, magnetic flux density and yoke flux in a five-phase induction motor fed from a tenpulse frequency converter. It is shown that especially the third space harmonic influences currents and torque of the machina considerably. The influence depends on connection arrangements of the converter and stator of the five-phase induction machine. Theoretical results are verified by experimental measurements.
Induction Machine Operation Mode Type Effect Onto The Losses
Skalka, Miroslav ; Schreier, Luděk ; Janda, M. ; Ondrůšek, Č.
This paper deals with analysis of losses behavior of Induction Machine for both operation mode types (motor/generator). The purpose of this work is the definition of eqiuvalent circuit parameters and theirs non-linear behavior depending on various factors - slip, mechanical torque, temperature. In this paper would be presented behavior of iron losses and joule losses of rotor and stator with specific parameters behavior. The whole analysis is done in ANSYS (by FEM) and MATLAB program.
Příspěvek k analýze asynchronního stroje se dvěma třífázovými statorovými vinutími
Schreier, Luděk ; Bendl, Jiří ; Chomát, Miroslav ; Skalka, Miroslav
Tato práce analyzuje situaci v indukčních strojích se dvěma třífázovými statorovými vinutími napájenými ze dvou nezávislých zdrojů. Pro analýzu situace v těchto strojích byla použita metoda prostorových vektorů. Práce uvádí matematický popis stroje, který je založen na soustavě diferenciálních rovnic. Jsou ukázány průběhy proudů a momentu stroje pro různé časové posuny napětí obou napájecích zdrojů. Z výsledku simulace vyplývá nutnost přesně zachovat časový posun obou napětí.
Influence of Induction Machine Operation Mode Type Onto The Equivalent Circuit
Skalka, Miroslav ; Schreier, Luděk ; Janda, M. ; Ondrůšek, Č.
This paper deals with analysis of Induction Machine equivalent circuit parameters for both operation mode types (motor/generator). The purpose of this work is the definition of equivalent circuit parameters and theirs non-linear behavior depending on various factors - slip, mechanical torque, temperature. The temperature influence for longitudinal resistances is done - which means, the stator and rotor resistance value depends on passing current. At the end an electromagnetic field comparison for the same operation point in both operation mode types will be presented. The whole analysis is done in ANSYS (by FEM) and MATLAB program.
Electromagnetic Field Calculation of IM for Different Equivalent Circuit Parameters
Skalka, Miroslav ; Schreier, Luděk ; Ondrůšek, Č.
This paper contains a calculation of electromagnetic field distribution of Induction machine for different equivalent circuit parameters due to the loads - each step is calculated for different rotor and stator currents. The definition of parameters and the real values of rotor and stator currents were presented on the XVI. Inter. Symposium on Electric Machinery in Prague. These data were used for a calculation of electromagnetic field distribution of Induction Machine (IM) by finite element method in ANSYS.
Definice parametrů náhradního schématu a výpočet elektromagnetického pole asynchronního stroje
Skalka, Miroslav ; Ondrůšek, Č. ; Schreier, Luděk
Článek se zabývá matematickým a grafickým vyjádřením nelineárních parametrů v náhradním schématu asynchronního stroje z naměřených údajů: zkouška naprázdno, nakrátko a při zatížení. Skutečné hodnoty proudů v jednotlivých tyčích rotoru jsou pro tyto parametry počítány. V článku jsou také uvedeny výsledky výpočtu rozložení elektromagnetického pole metodou konečných prvků v programu ANSYS.
Vliv vybraných parametrů na vlastnosti asynchronního generátoru
Schreier, Luděk ; Bendl, Jiří ; Chomát, Miroslav
Článek se zabývá problematikou určení magnetizačního proudu asynchronního stroje v generátorickém chodu. Je ukázáno, že v případě asynchronních generátorů malého výkonu může docházet k přesycování magnetického obvodu. Tuto skutečnost je nutné zohlednit při návrhu stroje.
Příspěvek k analýze ustáleného chodu asynchronního stroje
Schreier, Luděk ; Bendl, Jiří ; Chomát, Miroslav
Článek se zabývá problémy spojenými s určováním velikosti magnetizačního proudu v generátorickém chodu indukčního stroje. Podle některých odborníků je magnetizační proud v generátorickém chodu podstatně větší než v motorickém chodu a tuto skutečnost je nutné brát v úvahu při návrhu magnetického obvodu. Je ukázáno, že tento názor není v mnoha případech zcela oprávněný a tudíž není nutné z tohoto důvodu magnetický obvod zbytečně předimenzovat a jako generátor lze použít indukční stroj se stejným výkonem původně navzžený jako motor.
Influence of Third Space Harmonic Wave of Magnetic Density on Currents and Torque of Induction Motor
Schreier, Luděk ; Chomát, Miroslav
Influence of the third space harmonics of stator current layer and field density on properties of induction motors is discussed in the paper. The rise of these waves in connection with zero-sequence component in stator currents is shown. It is proved that the flux corresponding to the third wave of the field density passes through the air gap and can give rise to rotor currents in dependence of rotor winding configuration.

Národní úložiště šedé literatury : Nalezeno 61 záznamů.   začátekpředchozí52 - 61  přejít na záznam:
Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.