|
|
Detached house with design office
Horňáková, Veronika ; Holešovská, Anna (referee) ; Utíkalová, Ivana (advisor)
The topic of this bachelor thesis is a new family house with project office in Uherský Brod. Family house is located on flat land in a short distance from the city center. The building is two-floor. In the first floor is located entrance to the building, storeroom, utility room, living room, sbathroom, WC and project office with own entrance and WC. From the first floor is also entrance to the terrace and garden. In the second floor is situated bedroom with dressing room, two bedrooms, bathroom and WC. From one of the bedroom is possible to access to the balcony. The roof above the first floor is flat, the roof above second flat is mono-pitched roof. The building is made of structural masonry system Porotherm 30 P+D, insulation system EPS 100F, roof truss from bonded girder, roof covering foil Fatrafol. Garage is designed as a detached building roofed with a flat roof. Garage is made of the structural system Porotherm 30 P+D. Project Documentation is created in AutoCAD.
|
|
|
Detached Haus with a Design Office
Kopecký, Lukáš ; Pospíšil, Jaroslav (referee) ; Smolka, Radim (advisor)
The aim of this bachelor thesis is working out of the project documentation to execution of a new family house with a design office. The house is detached and is situated in the region of Vysočina in the village Světlá nad Sázavou, the cadastral area of Světlá nad Sázavou. It has a basement, ground floor and residential attic. The house is designed as a single family building for a family of four members. The part of the house is a design office that serves homeowner. The family house is roofed with Bramac 7. The shape of the roof is saddle except for the section of the design office where it is mono-pitched. The building is designed of brick construction system Heluz and of contact insulation ETICS.
|
|
|
Monolithic reinforced concrete detached house
Koždoň, Jakub ; Holešovská, Anna (referee) ; Sobotka, Jindřich (advisor)
The subject of this bachelor thesis is a newly built cast-in-place detached house in the village called Křepice u Hustopečí. It is a double-storey building without cellar. The shape and height position of the house is adapted to vertical alignment of the ground. The house is designed for four family members. The main entrance to the building is from the north side in the first floor level. The garage for two cars is a part of the house. The main residential rooms are situated to the south and east side of the building. Vertical load-bearing structures are made of a cast-in-place reinforced concrete as well as staircase. Partitions are made of clay blocks. The floor structures are composite steel and concrete structures and the roof is mono-pitched. The dominant elements of this detached house are big windows leading to the garden and connecting the house with the surrounding environment. The project was processed by computer software ArchiCAD 16.
|
|
|
Detached House Pietro
Slavíková, Pavlína ; Pospíšil, Jaroslav (referee) ; Smolka, Radim (advisor)
The project processes technical documentation of a detached house with workshop – pedicure. The building is located in Slatiňany. Built-up area is 157, 24 square meters. The detached house has two floors and one basement. In the first floor there is the plant designed for the householders and there is a garage with parking for one car. The house is based on the underlying strip of plain concrete and walled building system Porotherm. The roof of the second floor is mono-pitched with a roof inclination of 7 %. Roofing is skived Lindab Seamline. The roof of the first floor is designed as a warm flat. Bachelor´s thesis include a sketch, a block plan, a building documentation, fire safety measures, a building physics, seminar work, calculations and technical data for some products.
|
|
|
House with rehabilitation office
Klimšová, Barbora ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The subject matter is new family house with rehabilitation clinics in Hronov. The building is divided in part for operating rehabilitation clinic and part intended for housing. The building is set in a gently sloping terrain. The building has a southern part of one floor of the western part of two floors. The building is designed from the system Porotherm. The ceiling structure is made of Porotherm ceiling. Roof structure is designed as a warm flat roof about the first floor above the second floor is designed as a mono- pitched roof with a slope of 10 degrees.
|
|
|
Single-family house
Kadlec, Aleš ; Berka, Pavel (referee) ; Donaťáková, Dagmar (advisor)
For the solution of a bachelor work is used a new-build house in Dyjákovice. The object has two above-ground floors. It is projected from a ceramic system Porotherm with a monolithic ceiling tile. A roofing consists of mono-pitched roof with a wooden truss construction. The house is projected for four people.
|
|
|
The Family House
Gross, Petr ; Struhala, Karel (referee) ; Manychová, Monika (advisor)
The subject of this bachelor thesis is an elaboration of design documentation for new building of a detached house realization. The house will be built in Krnov at the current built-up area. The house will be used as a housing for family of four. The object is partially basemented, with two floors, where the second floor makes up an attic. The building is covered with a mono-pitched roof. One part of the object is a garage for one car, which is accessible from the exterior and from the hall. External loadbearing structures are made of ceramic masonry in above-ground floor and of permanent formwork at a level below the ground. Floor structure consists of girder and inserts. The staircase is prefabricated. The dominant feature of the building are large glazed area, glazed staircase space and walkable terrace above the garage. The documentation are drawn in AutoCAD program.
|
|
|
Family house with an establishment
Bartoš, Vít ; Berousková, Dana (referee) ; Daněk, Lukáš (advisor)
This Batchelor thesis describes the family house with establishment of the cafe. This object si located on the site number 2061/4 in Studénka. Tha family house is suitable for a family with 4 – 5 members. The house is without basement and thera are two floors. The house has 3 mono-pitched roof. The building is designed with HELUZ systém. The building is based on concrete footings. There is a wooden staircase. In the building there is a two-way support system. Heating is made by the gass boiler.
|
|
|
Family House
Slámová, Jaroslava ; Partika, Radek (referee) ; Košíčková, Ivana (advisor)
The subject of bachelor’s thesis is creation of project documentation of construction of a family house. The family house is a two-storey building, without basement. The building is founded on foundation strips, load-bearing structures are designed mainly from system Porothem, completed with reinforced concrete ceilings and timber structure of mono-pitched roof. The object is situated on parcels n.594 and 597 in municipality of Velešovice, cadastral area Velešovice, South Moravian region.
|
|
|
Detached family house with premise
Janíček, Vít ; Sobotka, Jindřich (referee) ; Vajkay, František (advisor)
Bachelor’s thesis Detached family house with premise is aimed for the solution of the two storey family house 4+1 with the premise (office) for the ensuring of the business activities of the potential owner. In the thesis is solved masonry building with the mono-pitched roof, founded on the foundation strips. He whole building is designed from the system members Ytong in low-energy standard in accordance with the ČSN 73 0540 – 2. Object is situated on the parcels 73/24 and 73/25 in the village Biskoupky, cadastral area Biskoupky, South Moravian district. Content of the bachelor’s thesis is technical documentation for the building realization according to the public notice no. 499/2006 Coll., about building documentation, especially according to the appendixes no. 1 and 2.
|
guest ::
