|
Distribution of heavy metals in waste incinerator
Poláková, Annamária ; Brummer, Vladimír (referee) ; Jecha, David (advisor)
The main scope of thesis is to describe the pollutant removal techniques with a focus on heavy metals. With that relate chapters describing the formation of pollutants and their effect on human health. The thesis focuses on a detailed description of flue gas cleaning technology and its evaluation. Evaluation is shown in tables comparing emission measurement on waste incineration plant SAKO Brno, a.s. with emission limits. The thesis also briefly describes other options for municipal waste management.
|
|
Advanced Computational Tool for Flue Gas Cleaning System Design in Thermal Processing of Waste
Kropáč, Jiří ; Klemeš,, Jiří (referee) ; Ucekaj, Vladimír (referee) ; Bébar, Ladislav (advisor)
The thesis describes the development of a computational tool that allows sophisticated analysis and design of flue gas cleaning technologies for thermal treatment of waste. The assessment of a technological composition of the process in terms of energy consumption, temperature of the flue gas stream and ensuring the fulfilment of emission limits allows estimating the influence of flue gas cleaning system on parameters of an up-to-date waste incinerator. The work is based on an already created computational system. Its output will be integrated into a software system with a user-friendly interface. Creation of the computational system is based on the performed research in the given area. The work presents sets of operational values and relationships describing current technologies used to reduce harmful emissions in the flue gas from thermal treatment of waste.
|
|
Reduction of nitrogen oxides from the flue gas stream on catalysts under non-standard conditions
Minář, Marek ; Brummer, Vladimír (referee) ; Jecha, David (advisor)
The objective of the presented diploma thesis is reduction of nitrogen oxides from the flue gas stream on catalyst under non-standart conditions. Emphasis is places on the description of selected pollutants in flue gas (especially nitrogen oxides), legislative requirements for air protection and technologies for removal of nitrogen oxides, expecially methods of selective catalytic and non-catalytic reduction. The practical part is devoted to the reduction of nitrogen oxides by selective catalytic reduction on a pilot plant INTEQ II in the laboratory NETME Center. The subject of interest is the determination of the NOx reduction efficiency depend on the temperature for selected catalyst. The end of the practical part pursues with comparison of measurement results and their evaluation.
|
|
Co-incineration sewage sludge in the existing plant
Krejčí, Tomáš ; Ferdan, Tomáš (referee) ; Frýba, Lukáš (advisor)
This thesis focuses on problems with co-incineration of sewage sludge in existing plants. The introduction of my thesis deals with a brief summary of a sludge management, sludge treatment methods and subsequent utilizations methods used for sledge disposal. Next chapter contains a calculation of calorific value, depending on the water content and volatile substances in dry solids of the sludge, it offers an overview of devices applicable for thermal processing of sludge and a description of the co-incineration in existing plants. The seventh chapter is devoted to the legislative parameters which influence the ways of dealing with sewage sludge. After the thermal treatment of sludge it is necessary to decontaminate flue gases of harmful substances resulting from incineration process, thus following there is a description of the most important devices used for its elimination or its reduction. My work ends with a search of methods dealing with the thermal sludge utilization in foreign countries.
|
|
Energetical utilization of waste, especially sewage sludge
Havlásek, Martin ; Kuba, Pavel (referee) ; Frýba, Lukáš (advisor)
This bachelor´s work discusses about energetical utilization of sewage sludge. The process is described from sludge treatment to flue gas cleaning. The main emphasis is on incineration, which are governed by legislation. First are listed sludge treatment and utilization technology which included thermal processing in which is thoroughly described the process of incineration. The following are methods for co-incineration of sludge and devices for direct incineration. Work is finished by chapter about flue gas cleaning.
|
|
Support Technologies of Steam Boiler
Uhříček, Michal ; Křemínský, Pavel (referee) ; Lisý, Martin (advisor)
The thesis deals with the layout design of a steam boiler burning RDF and the design of its supporting technologies with regard to design practice. In the thesis are modelled 1st - 4th stroke, followed by the flue gas cleaning, feed tank with pumps, flue gas recirculation routes and air ducts. The boiler is denied by a steel structure with platforms and placed in the boiler room. Based on the designed air, flue gas and feedwater routes, an aerodynamic and hydraulic calculation is performed. Using pressure drop, combustion air fan, flue gas fan and recirculation fan are designed. Based on the hydraulic calculation, the feed pumps are designed.
|
|
Reduction of nitrogen oxides from the flue gas stream on catalysts under non-standard conditions
Minář, Marek ; Brummer, Vladimír (referee) ; Jecha, David (advisor)
The objective of the presented diploma thesis is reduction of nitrogen oxides from the flue gas stream on catalyst under non-standart conditions. Emphasis is places on the description of selected pollutants in flue gas (especially nitrogen oxides), legislative requirements for air protection and technologies for removal of nitrogen oxides, expecially methods of selective catalytic and non-catalytic reduction. The practical part is devoted to the reduction of nitrogen oxides by selective catalytic reduction on a pilot plant INTEQ II in the laboratory NETME Center. The subject of interest is the determination of the NOx reduction efficiency depend on the temperature for selected catalyst. The end of the practical part pursues with comparison of measurement results and their evaluation.
|
|
Technology to remove nitrogen oxides (NOx) from flue gases for large combustion plants
Kučera, Jan ; Brummer, Vladimír (referee) ; Jecha, David (advisor)
This diploma thesis deals with selected abatement techniques of nitrogen oxides (NOx) developed for large combustion plants. The first part describes selected NOx, their properties and explains the formation during combustion. Furthermore, there is an analysis of current legal legislation regulating the issue of emission limits. The third part presents selected primary and secondary measures that are widely used. The emphasis is placed on the description of selective catalytic (SCR) and non-catalytic reduction (SNCR). Finally, the basic design of these technologies for model combustion equipment is performed. The consumption of reducing medium and the volume of the catalyst for the mentioned techniques are calculated here. The estimate of selected operating and investment costs is a part of the basic scheme.
|
|
Advanced Computational Tool for Flue Gas Cleaning System Design in Thermal Processing of Waste
Kropáč, Jiří ; Klemeš,, Jiří (referee) ; Ucekaj, Vladimír (referee) ; Bébar, Ladislav (advisor)
The thesis describes the development of a computational tool that allows sophisticated analysis and design of flue gas cleaning technologies for thermal treatment of waste. The assessment of a technological composition of the process in terms of energy consumption, temperature of the flue gas stream and ensuring the fulfilment of emission limits allows estimating the influence of flue gas cleaning system on parameters of an up-to-date waste incinerator. The work is based on an already created computational system. Its output will be integrated into a software system with a user-friendly interface. Creation of the computational system is based on the performed research in the given area. The work presents sets of operational values and relationships describing current technologies used to reduce harmful emissions in the flue gas from thermal treatment of waste.
|
|
Distribution of heavy metals in waste incinerator
Poláková, Annamária ; Brummer, Vladimír (referee) ; Jecha, David (advisor)
The main scope of thesis is to describe the pollutant removal techniques with a focus on heavy metals. With that relate chapters describing the formation of pollutants and their effect on human health. The thesis focuses on a detailed description of flue gas cleaning technology and its evaluation. Evaluation is shown in tables comparing emission measurement on waste incineration plant SAKO Brno, a.s. with emission limits. The thesis also briefly describes other options for municipal waste management.
|