|
|
Sewage pumping station
Kustyánová, Orsolya ; Šulák, Pavel (referee) ; Strnad, Jiří (advisor)
This thesis deals with the design and assessment of all supporting parts of a reinforced concrete sewage pumping station in the village Vrbice u Velkých Pavlovic. The main parts of the thesis are the technical report, static analysis, drawing documentations and visualisations. Calculation of internal forces was performed by the software Scia Engineer and verified by manual calculation. The drawing documentation consists of shape and reinforcement drawings of supporting parts.
|
|
|
Sewage absorbing well
Kulla, Lukáš ; Perla, Jan (referee) ; Strnad, Jiří (advisor)
The aim of this bachelor’s thesis is to determine the loads acting on the waste shaft of given dimensions and design the reinforcemen. Then assess the ultimate limit state and servicesbility. When calculating internal forces are applied manual calculation, which is then verified tabular values and static program based on finite element method SCIA Engineer. The structure is designed to complies with all requirements of technical standards CSN EN.
|
|
|
SUBSTRUCTURE OF A POLYFUNCTIONAL BUILDING ČESKÁ SKALICE
Výborný, Václav ; Špinar, Petr (referee) ; Kantová, Radka (advisor)
The main contents of the thesis is solving a construction-technological project substructure of a polyfunctional building Česká Skalice. Substructure is based on two height levels on bored piles. The first height level is called SECTION A, the second height level is called SECTION B. The base structure consists an angled base plate, which consists from two horizontal plates shifted against each other about one floor and between plates is a basement wall. The base plate in SECTION A is solved together with ceiling plate 1. PP. Further there is solved structures for two lift shafts . The thesis includes a technical report, technologic instructions, plan of building site, selected constructional details, cost estimate, schedule, machinery composition, control and testing plans, safety at work and environmental protection.
|
|
|
Design of Monolithic RC Structure
Kuchař, Martin ; Zlámal, Martin (referee) ; Švaříčková, Ivana (advisor)
The bachelor’s thesis describes the design of the load-bearing part of the reinforced monolithic frame concrete structure of the home for the elderly. The subject of assessment are the typical elements of the load-bearing skeleton in the 1st floor: frame rung PS, beam T5, column SR3a and the ceiling plate above the first floor. The assessment is made for ultimate limit states, moreover for frame rung PS the deflection control is provided, too.
|
|
|
Cast-in-place underground pumping station
Tejkal, David ; Zich, Miloš (referee) ; Strnad, Jiří (advisor)
The aim of this work was to design a monolithic gas station. Construction was divided to 3 stages: base plate concreting, wall of the tank and slab. All these parts are connected together. Design was centered on all of these parts and problems during concreting and using were solved too. It also includes drawings.
|
|
| |
|
|
Monolithic concrete building at sewerage plant
Klimeš, Petr ; Bažant, Zdeněk (referee) ; Strnad, Jiří (advisor)
Bachelor's thesis deals with design of monolithic concrete construction with a timber roof truss for a device of sewerage plant. This construction consists of these elements- strip foundation, walls with lintels, slab and timber trusses. This thesis contains static analysis of the component parts and their drawing documentation.
|
|
|
Load bearing structure of sport building object
Klodner, David ; Šulák,, Pavel (referee) ; Šimůnek, Petr (advisor)
This thesis is focusing on the design and assessment of reinforced concrete frame of the administrative part of the sports hall. In developing the computational model, the emphasis was on the comprehensiveness and reliability of an idealized structure, providing a economical design of elements. Assessment was conducted on the ULS and SLS for selected critical cross section - double staircase, ceiling slab, ceiling beam, the inner column and footings.
|
|
|
Superstructure of the backpart of the family house
Jetmar, Ondřej ; Šulák,, Pavel (referee) ; Strnad, Jiří (advisor)
The thesis accommodates a design of a slab made out of reinforced concrete. On one side, the slab overhangs the load-bearing mansonry. The thesis comprises two solutions. In the first solution, the overhung part of the slab is not supported while in the second solution is this part locally supported by pillars. The thesis contains two variants of the slab design and also evaluation of the results.
|
|
|
Reinforced concrete frame construction
Duda, Tomáš ; Strnad,, Jiří (referee) ; Koláček, Jan (advisor)
The bachelor’s thesis describes the design and assessment of the load-bearing part of the reinforced concrete structure of the department store – the frame. Respectively design and assessment of individual structural elements of the this frame at ultimate limit states. This is a rung frame R1, column S1, footings P1 and floor plate D1 above the first floor of this building.
|
guest ::
