|
Selected structural detail of the reinforced concrete frame
Teplý, Jakub ; Matušíková, Anna (referee) ; Girgle, František (advisor)
The bachelor thesis solves and compares between them three methods (ČSN EN 1992-1-1, ČSN 73 1201, MC 2010) of punching shear slabs. In this thesis are the methods analyzed and compared with each other. In other part of thesis is solved and compares dependence of the required shear reinforcement areas on the various parameters, for example thickness of slabs or percentage of reinforcement. Conclusion provide an evaluation of the results and compared in charts course of dependence of the required shear reinforcement under the same conditions state.
|
|
D - Areas Analysis using Strut and Tie models
Konárek, Lukáš ; Hradil, Petr (referee) ; Zídek, Rostislav (advisor)
The objective of bachelor thesis is the analysis of typical D-areas of reinforced concrete structures. The analysis is performed using methods replacement truss. In the beginning models replacement truss are used for analysis shear bending girder. It is also shown in the individual chapters specific D-areas using spare truss method. These particular truss models are solved by RFEM program operating on the principle of Finite Element Method.
|
| |
| |
|
Sewage pumping station
Kustyánová, Orsolya ; Šulák, Pavel (referee) ; Strnad, Jiří (advisor)
This thesis deals with the design and assessment of all supporting parts of a reinforced concrete sewage pumping station in the village Vrbice u Velkých Pavlovic. The main parts of the thesis are the technical report, static analysis, drawing documentations and visualisations. Calculation of internal forces was performed by the software Scia Engineer and verified by manual calculation. The drawing documentation consists of shape and reinforcement drawings of supporting parts.
|
| |
|
The assesment stability of the cliff
Bíba, Tomáš ; Lossmann, Jaroslav (referee) ; Horák, Vladislav (advisor)
The stability of rock walls and slopes are an integral part of professional geotechnical assessment wherever there is a breach of natural or rock mass. Assessment always depends on the expertise and experience in particular industries that report preparation. Performed mostly analytical calculation (classic or using software) or numerically. The best way is to use both methods and compare them. The aim is always best to estimate the behavior of rock mass and to ensure its safety.
|
| |
|
Cast-in-place structure at sewerage plant
Hůrka, Jiří ; Šulák, Pavel (referee) ; Strnad, Jiří (advisor)
The thesis is focused on the design and the assessment of horizontal supporting parts and concrete trough on the sewage pumping station in the Boskovice town. There are parts of thesis: technical report, static analysis, design documentation and visualizations. The technical report describes the proposed solution. Calculation of internal forces was performed by manual calculation and verified by the software RFEM. The design documentation consists of shape and reinforcements drawings of selected structural elements.
|
|
Statical solution of reinforced concrete structure
Velecká, Renata ; Kostiha, Vojtěch (referee) ; Zlámal, Martin (advisor)
Bachelor's thesis deals with statical solution of structure of the office building. The theme of solution is reinforced concrete monolithic point-supported ceiling slab. It's supoported by columns and whole structure is completed by two reinforcing cores and reinforcing wall. Structure review is done according to the first limit state – carrying capacity.
|