|
|
Possibility of mixing PMB RC type binders with reclaimed binder from RAP
Trnka, Lukáš ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
The diploma thesis deals with the possibility of mixing binders of the PMB RC type with a binder made of reclaimed ashalt. lists the types of asphalt binders, its production and modification are in the teoretical part. There is explained the principle of rejuvenators function, types of rejuvenators. The procedures for performing tests on asphalt binders: recovery of asphalt binder, needle penetration, softening point (ring and ball method), reversible ductility, breaking point (according to Fraass) and DSR. Individual tests are evaluated and asphalt mixtures are compared in the practical part of asphalt binder. The diploma thesis deals with the possibility of mixing binders of the PMB RC type with a binder made of reclaimed ashalt. lists the types of asphalt binders, its production and modification are in the teoretical part. There is explained the principle of rejuvenators function, types of rejuvenators. The procedures for performing tests on asphalt binders: recovery of asphalt binder, needle penetration, softening point (ring and ball method), reversible ductility, breaking point (according to Fraass) and DSR. Individual tests are evaluated and asphalt mixtures are compared in the practical part of asphalt binder.
|
|
|
Influence of aging on selected properties of asphalt binders
Rimel, Jindřich ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
In this bachelor’s thesis, the properties of four asphalt binders with different degree of modification are compared. The influence of aging on their properties is examined. In the theoretical part, the types of aging, their impact on binders, basic laboratory methods of aging and the details of performed tests are explained. In the practical part, the results of tests are evaluated and the change of properties before and after aging are compared.
|
|
| |
|
|
MSCR test in dynamic shear rheometer
Střasáková, Monika ; Coufalík, Pavel (referee) ; Kudrna, Jan (advisor)
The laboratory properties of bituminous binders in relation to permanent deformation are described in this bachelor‘s thesis. The principle and procedure of MSCR test will be explained in the theoretical part. The principle of empirical tests (needle penetration, elastic recovery and softening point) will be also described. The properties of four bituminous binders will be evaluated in practical part. The comparison of binders will be performed based on test results.
|
|
|
Use of an additive suitable for additional modification of the asphalt mixture
Machová, Sára ; Hegr, Zdeněk (referee) ; Dašek, Ondřej (advisor)
This thesis deals with the modification of asphalt binder 50/70 with fast reacting SBS. This is a relatively new additive that should be able to improve the binder properties during mixing of the asphalt mix at the plant. In the theoretical part, the issue of asphalt-mixing plant and polymer modification additives is presented. Furthermore, the test methods used such as needle penetration, softening point, determination of the elastic recovery, DSR and MSCR are described. Several modified binder samples were developed for the tests, in which mixing temperature, mixing time and SBS content were combined. The results of each test were compared and evaluated at the end of the thesis.
|
|
|
PmB - Polymer modified bitumens
Venclíková, Michaela ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
In this bachelor thesis, there are described modified bitumens. The issue of modified bitumens will be explained in the theoretical part. In the practical part, it will be prepared set of modified bituminous binders with different degree of modification. Basic empirical testing and functional testing will be determined. The aim of thesis is to find the optimal source of unmodified bitumen for modification.
|
|
|
Usage of fast-reacting SBS polymer in the production of asphalt mixtures
Dohnálek, Jakub ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
The subject of this diploma thesis is a research of bituminous binder modification by fast react-ing polymer SBS. The theoretical part covers an introduction to bituminous binders, their pro-duction, chemical and physical-mechanical properties. The identification of bituminous binders and their use in bituminous mixtures is briefly described. To conclude, current modification methods are described in detail and important modifiers are introduced. In the practical part, three applied tests (softening point, elastic recovery and penetration) are described in detail. The bituminous binders tested (20/30, 30/45, 70/100, PMB 25/55-55 and PMB 45/80-50) and the fast-reacting polymer SBS are introduced. Samples with two weight percentages of SBS, 7,5% and 10%, are produced. Two mixing times, 60 seconds and 600 seconds were used to mix the bituminous binder and SBS. In conclusion, the results are evaluated and commented. Further research suggestions regarding this field are recommended.
|
|
|
Evaluation of properties of asphalt binder from waste materials containing bitumen
Košťálová, Aneta ; Hegr, Zdeněk (referee) ; Dašek, Ondřej (advisor)
The bachelor's thesis deals with the comparison of the properties of two types of asphalt binders obtained from waste materials. The theoretical part contains the properties of bitumen waterproofing sheet and asphalt shingles. In the following practical part, tests of asphalt binders on individual samples are described and then carried out. These include tests to determine needle penetration, softening point by the Ring and Ball method, determination of the elastic recovery and determination of rheological properties by DSR. Finally, the results are evaluated, summarized and compared with each other.
|
|
|
Use of an additive suitable for additional modification of the asphalt mixture
Machová, Sára ; Hegr, Zdeněk (referee) ; Dašek, Ondřej (advisor)
This thesis deals with the modification of asphalt binder 50/70 with fast reacting SBS. This is a relatively new additive that should be able to improve the binder properties during mixing of the asphalt mix at the plant. In the theoretical part, the issue of asphalt-mixing plant and polymer modification additives is presented. Furthermore, the test methods used such as needle penetration, softening point, determination of the elastic recovery, DSR and MSCR are described. Several modified binder samples were developed for the tests, in which mixing temperature, mixing time and SBS content were combined. The results of each test were compared and evaluated at the end of the thesis.
|
|
|
Usage of fast-reacting SBS polymer in the production of asphalt mixtures
Dohnálek, Jakub ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
The subject of this diploma thesis is a research of bituminous binder modification by fast react-ing polymer SBS. The theoretical part covers an introduction to bituminous binders, their pro-duction, chemical and physical-mechanical properties. The identification of bituminous binders and their use in bituminous mixtures is briefly described. To conclude, current modification methods are described in detail and important modifiers are introduced. In the practical part, three applied tests (softening point, elastic recovery and penetration) are described in detail. The bituminous binders tested (20/30, 30/45, 70/100, PMB 25/55-55 and PMB 45/80-50) and the fast-reacting polymer SBS are introduced. Samples with two weight percentages of SBS, 7,5% and 10%, are produced. Two mixing times, 60 seconds and 600 seconds were used to mix the bituminous binder and SBS. In conclusion, the results are evaluated and commented. Further research suggestions regarding this field are recommended.
|
guest ::
