|
|
Use of Additive Technology for the Production Concept of Turbocharger Components
Robl, Jan ; Ňuksa, Petr (referee) ; Sedlák, Josef (advisor)
The thesis deals with possible use of additive technology in heat-resistant aplications. The rapid improvement of additive technology in recent years has brought more advanced materials such as nickel based superalloys, opening new oportunities for the use of this additive technology. First part of the thesis is dedicated to nickel based superalloys processing, precision casting and metal additive manufacturing. Other part analysed the results of mechanical properties and textures of the surface followed by a comprehensive assessment of DMLS technology. Part of the thesis is also the analysis of fracture surfaces on transmission and electron microscopy. Based on acquired nowledge, the conclusion is made about the possible use of DMLS in the future of heat-resistant applications.
|
|
|
Development of 3D metal printing process parameters for producing of the lattice structure
Jaroš, Jan ; Koutný, Daniel (referee) ; Vrána, Radek (advisor)
Selective laser melting (SLM) in additive technology, which allows production of lattice structures. Lattice structures are very difficult to produce using conventional methods. The main use of lattice structures is in aerospace industry and medicine for bone implants production. In this work influence of processing parameters (laser power, scanning speed) on properties (diameter, surface roughness, porosity) of struts is investigated. The processing parameters selection was based on single tracks test. In the first test, ImageJ was used to determine porosity of struts. In the second test porosity was analyzed with more accurate µCT technology. Both tests used 3D scanning technology to determine dimension accuracy and surface roughness of samples. The measurement results led to the detection of processing parameter „window“ where samles had the best combination of surface roughness and porosity. The best results were achieved with 225-275 W laser power and scanning speed of 1400-2000 mm·s-1.
|
|
|
The influence of the parameters of stereolithographic 3D printing on the printing time
Kůst, Martin ; Škaroupka, David (referee) ; Zatočilová, Aneta (advisor)
This paper deals with stereolithographic 3D printing (SLA). It describes both upper and lower lighting design and shows the differences between laser light and DLP (Digital Light Processing) projector. Another part is to find the dependence between the time of exposure and the thickness of the layer also known as material profile on the DETAX, gray. So another work and further experiments can be done using this material. These experiments are performed on Way2production's SolFlex650 SLA printer. For ease of use with this printer, parameters affecting print time have been identified and a model is then found to calculate the total print time.
|
|
|
Possibilities of using aditive technologies in direct manufacturing of foundry moulds
Herzán, Jiří ; Šlajs, Jan (referee) ; Horáček, Milan (advisor)
The bachelor thesis deals with the production of foundry molds with using additive technologies. At first, the additive technologies are distributed according to ASTM (American Society for Testing and Materials) and subsequently according to the state of the base material. Then, three types of technologies, that can be manufactured by Rapid Prototyping are described. The last chapter of the bachelor thesis is a real example of the production of a prototype fan casting from aluminum alloy AlSi9Cu3(Fe), which was casted into a printed mold by “3D Sand Printing” technology. Based on the obtained data were assessed technical, time and cost parameters of manufacturing the fan. The findings were compared with the molding technology of the ordinary printed pattern, which is an alternative to prototype production. The casting of the fan was cast in Armatmetal s.r.o. in Olomouc.
|
|
|
Production Process of Model of Holder Using Additive Technology of Rapid Prototyping
Ivančic, Marek ; Zouhar,, Jan (referee) ; Sedlák, Josef (advisor)
The bacherol thesis is focused on approach of design and production of the model GPS holder with using additive technology Rapid Prototyping. The design is created in parametric Autodesk Inventor programme and next production is realized with utilizing manufacturing machine Fortus 400, which generates products on the principle of additive method of Fused Deposition Modeling. The thesis also consists of characterize and practical applications of additive technology Rapid Prototyping inclusive of the most used methods and materials of the technology. In the end of the thesis it´s accomplished technical – economic valorization of the GPS holder and comparing the production costs, which would have spent at other organizations.
|
|
|
Analysis of SLM production accuracy of sipes for tire molds
Tomeš, Jan ; Rapant, Martin (referee) ; Koutný, Daniel (advisor)
The first part of the diploma thesis is focused on the analysis and evaluation of the current production of sipes by two SLM devices PXL and M2 Cusing, produced by Phenix Systems and Concept Laser companies. The samples of both machines went through the same manufacturing process and the same process of measurement and evaluation, in order to carry out comparison between individual machines. Geometric accuracy, surface roughness, mechanical properties, and material structure of the samples have been compared. For the sipes it was necessary to create a digital evaluation methodology of geometry. In the second part of the thesis, process parameters are selected on the basis of research and further their influence on surface roughness of manufactured sipes is analyzed.
|
|
|
Biomechanical research study of skull plates and implants
Vystrk, Tomáš ; Valášek, Jiří (referee) ; Marcián, Petr (advisor)
Cranial implants along with fixators are used to restore the function of the damaged area of the human skull, where due to disease or injury the defect was created. When assessing the suitability of the implant and fixators the mechanical properties are significant. With this the material and shape of implant and fixators are related. The implant must be suitable with human bone tissue and also be able to withstand long-term loading. This paper summarizes the present knowledge regarding the design, manufacture and application of cranial implants. Next the stress-strain analysis of the loaded scull with irregular shaped defect, placed implant and fixation system is provided.
|
|
|
The study of the effect of additive manufacturing technology parameters Selective Laser Melting properties of the produced object
Žabka, Marek ; Koukal, Ondřej (referee) ; Vrána, Radek (advisor)
Metal additive technology currently finds use in a large number of industrial sectors. Mainly in domains such as aviation, medicine and astronautics, the emphasis is laid on mechanical and material properties of materials. This bachelor thesis deals with the research study of process parameters of technology Selective Laser Melting for material AlSi10Mg and stainless steel 316L. In thesis the impact analysis of main process parameters: laser power, scanning speed, hatch distance, layer thickness, especially on the porosity of the samples was carried out. Recommended settings for both materials were found based on the research of the current state. It was further found out the influence of parameters such as powder humidity or laser scan strategy.
|
|
|
The Use of Additive Technology for Manufacturing Components of the Sample
Vrbická, Eliška ; Sedlák, Josef (referee) ; Kalivoda, Milan (advisor)
Thesis deals with the use of additive manufacturing technologies for the production of sample components. These are mainly using method Fused Deposition Modeling (FDM). The production was used to 3D printer for based on this principle. Manufactured subject has own design of pendant, this pendant has shape of blooming flower with leaf. The model was created in SolidWokrs 2013. This model is further elaborated in the program CatalystEX. Thus originated data for the printer Dimension uPrint. Once printing is complete and upon dissolution the of aid were removed imperfections printing. Thus-to-terminated object can be used as a garnish.
|
|
|
Friction components produced by rapid prototyping
Pečenka, Tomáš ; Škaroupka, David (referee) ; Omasta, Milan (advisor)
The main aim of this bachelor thesis is to make an overview of use of additive technology for production of friction components. The first part is concerned on review of additive methods and type of materials. In the second section are situated applications of this technology for fabrication of friction components. The main goal of last part is research in area of tribology of parts manufactured by additive technology.
|
guest ::
