|
|
Production technology of a plastic headlight panel in a car
Vrána, Petr ; Žák, Ladislav (referee) ; Kandus, Bohumil (advisor)
Diploma thesis which is developed for the master’s degree program (M2I – K Mechanical engineering) presents a proposal solution for production technology plastic car headlins parts from polymer material PBT GF30. Literature review summarizes the findings of thermoplastic injection technology and the structural design possibility of injection molds. The paper examined two variants of the running system, which are suitable for production of injection molding components. Finaly, after technical - economic assessment, we came to the conclusion that the better option is to use the hot runner system. In the practical part is the specified product modeled by the help of 3D software and the injection mold was designed. The design was implemented by CATIA V5 R20. For the design and manufacture of injection mold were used normality from MEUSBURGER. For the chosen alternative technology of production were made calculations and was selected injection molding machine Electron 75 – 300 from FERROMATIC.
|
|
|
Design of manufacturing technology for plastic base timer
Březina, Vít ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This master´s thesis addresses the design of technology manufacturing plastic parts. The first part deals with the study of theoretical properties of plastics and processing applicable to a given problem. In the second part is designed double injection mold with hot runners. The following authentication function by analyzing the injection solution and the work concludes technical and economic assessment of the project.
|
|
|
Optimization of production technology for plastic cap tube
Majerčíková, Erika ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This thesis deals with the optimization of the production technology of the cap tube made by injection molding. Series production is set at 5 000 000 units per year; the minimum time of the production is 5 years. A literary study is developed, focusing on the technology of injection molding in molds including the possibilities of the optimization of the production by changing the structure of the mold. The practical part of the thesis is devoted to the optimization of existing mold with cold runner system for the production of the cap tube, using the hot runner system supplied by Synventive. The change of the structure of the mold involves changing the three plate mold to a two plate mold. It is about changing the fixed part of the mold in which the hot runner system is placed; it is composed of standards parts of the company HASCO. Based on the technological parameters the injection machine Krauss Maffei KM 80-380 CX is chosen. There is a technical-economical evaluation of the optimization of the production by using the hot runner system at the end of the thesis.
|
|
|
Design of manufacturing technology for plastic cover electrical device
Kočárek, Karel ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This thesis contains of theoretical part which deals with injection molding, properties of some polymer materials are included also. Design of plastic injection mold for cover of electronic device is presented in practical part. Manufacturing parameters and injection machine selection are specified with mold structure consideration. Production costs and the final price of the plastic part are calculated in economical evaluation.
|
|
|
Production technology of plastic threaded adapters
Turek, Tomáš ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
The Master thesis deals with the possible production of the plastic unit with thread. As the most suitable material was chosen the polyformaldehyde (POM), its production label is Delrin 500P NC010 by Du Pont. The thesis consists of a part with the information about the technology of injection molding of plastics and a part where processing parameters for the production of the plastic unit are designed. Part of the solution was to create an assembly design of injection mold. Since the plastic unit with thread is very specificly shaped the form is handled as a slide mold. The mold is pieced together from normalized parts by the Hasco and DME company. The serie of 100 000 pieces would be delivered in 5 months. Because of the cost savings a solution of the cold-runner system was suggested. A suitable injection molding machine was chosen from the calculated values from Arburgfroms – Type 370s Allrounder 500-170.At the end of the thesis costs were evalueted for acquire per one piece of adapter.
|
|
|
Production of components 'COVER'
Václavek, Jiří ; Kandus, Bohumil (referee) ; Žák, Ladislav (advisor)
The theory of plastic injection molding technology together with procedure of designing injection molds is elaborated in this master thesis. Also, the technology of production is designed, derived from assigned component „cover“ analysis affirmed by necessary calculations. On the bases of these calculations, injection machine fitting requirements is chosen. Then injection mold is designed for the assigned component. Simulation of injection is performed for this mold using Autodesk Inventor 2011 and its module Moldflow and then results are thoroughly analyzed. Economical evaluation for this component is then executed towards the end of the thesis.
|
|
|
Production technology of plastic bracket bearings motor
Svoboda, Vladimír ; Odehnal, Petr (referee) ; Kandus, Bohumil (advisor)
The target of this dissertation is based on the specified shape of plastic part to develop search technology of plastic injection molds, to the technological design process and construction of injection molds, including the necessary calculations. The project includes a search and a practical sections. Based on information from a search section a suitable material was chosen, which became the basis for practical section. The practical section with basic technology calculation is complemented by filling simulation analysis and stress analysis of critical elements. A part of this dissertation is the set of the drawings.
|
|
|
Design of manufacturing technology for plastic terminal device
Adamiec, Pavel ; Žák, Ladislav (referee) ; Kandus, Bohumil (advisor)
The master thesis deals with design to produce terminal using the plastic injection molding. In the first part are theoretical information about injection molding and injection molding with inserts. The second part is a concrete design of production terminal which contains: injection mold design, calculation of the injection parameters, machine selection, technical and economic evaluation of production. Terminal is made of polyamide 66, inserts material is brass. Parts of injection mold assembly are selected from Hasco standards. The main parts of assembly are made of 1.2312 steel. Production cycle is placed on injection machine Allrounder 375 V from Arburg.
|
|
|
Technology of production components from plastic material
Špičák, Pavel ; Kandus, Bohumil (referee) ; Žák, Ladislav (advisor)
The project developed in terms of engineering study of field N2307- 00 Engineering Technology submits a design of components from plastic production technology- cover on the table. The introductory part of this study describes characteristics, division and possible plastics processing. The work consists of production technology proposal (injection into metal mold) and its construction solution. The another part proposes suitable injection material and verification of injection machine. The final part of work consists of financial evaluation of injection process, appropriate blue prints and appendices.
|
|
|
Different methods of connecting electrical parts in car locks
Kollár, Pavel ; Kandus, Bohumil (referee) ; Žák, Ladislav (advisor)
This Diploma thesis is aimed at various ways of connecting electrical parts in car locks. This part of the thesis includes technologies of electric cables, printed circuit boards, lead frames, 3D-MID technology and technology of electroconductive plastics materials. Listed technologies are compared. The aim of the practical thesis portion is the application of electroconductive plastic materials on the given part. For this purpose necessary changes were designed in the provided small series injection mold. The thesis also includes drawing documentation of the designed construction changes in the injection mold, as well as economic appraisal of the prototype manufacturing fees.
|
guest ::
