|
|
Effect of additives in lead-acid batteries for hybrid electric vehicles
Tobolák, Jakub ; Křivík, Petr (referee) ; Bača, Petr (advisor)
This thesis is focused on lead-acid batteries used in hybrid electric vehicles. These batteries operate under partial charge, which brings problems with premature capacity loss. Tasks is to examine the influence of glass fibers as possible additives to the negative electrode of these cells in order to extend their life. The text describes the problem of hybrid electric vehicles, lead-acid batteries and other electrochemical sources.
|
|
| |
|
|
Negative Electrode for Lithium-Ion Batteries
Libich, Jiří ; Vanýsek, Petr (referee) ; Straková Fedorková, Andrea (referee) ; Vondrák, Jiří (advisor)
The dissertation thesis deals with investigation of electrode materials for Lithium-ion batteries. The main aim of investigation was focused to materials for negative electrode of Litihum-ion batteries. These negative electrode materials operate on intercalation principle. Object of interest are carbonaceous materials, especially their graphite forms. Graphite plays host role in lithium ion – graphite interactions that provides LiC6 compound. As a result of that investigation can be considered improving of graphite materials from stability, irreversible capacity and other parameters points of view. This kind of investigation takes an important part in field of elementary investigation work engaged to the next generation of Lithium-ion batteries. The work also describes the fire safety issue of Lithium-ion batteries along with compatibility of negative electrode materials and aprotic electrolytes.
|
|
|
Causes of Premature Capacity Loss of Lead-Acid Accumulators Operating in PSoC Mode in Hybrid Electric Vehicles
Bilko, Radek ; Jareš, Petr (referee) ; Dostál, Zdeněk (referee) ; Bača, Petr (advisor)
This thesis is completion of whole stage of researches and it is a result of existing need of increase efficiency, utilization rate and service life of lead acid batteries VRLA planned for utilization in hybrid electric vehicles in mode of partial state-of-charge PSoC. During the application of mode PSoC at lead acid battery occurs irreversible sulfation of negative electrodes and thus to loss their charging capability. This phenomenon, according to the latest trend called PCL3, isn´t connected with subsequently referred effects PCL1, PCL2, show up on positive electrodes. Result of this thesis is finding a new types of additives, determine their optimum amount and size in such a way that innovated composition of negative active materials be able to resist sulfation of negative electrode during operation in mode PSoC. Part of the effort to clarify actions ongoing on negative active material and causes non-returnable sulfation electrodes is also monitoring of structural changes electrode active material by using environmental scanning electron microscope, which helped to clarify processes related with loss of capacity in mode PSoC. Special attention during reserches was focused on study of the properties contact layers between collector and electrodes active material and itself active materials lead-acid battery druring exploitation. There were gain new information about influence repeated cycling of (charging, discharging) the critical area of the electrodes. Measurements was carried out on specially prepared experimental electrodes DC Difference Method, this enabled obtain data in situ.
|
|
|
Negative Electrode of Lithium Secondary Cells
Makovička, Jaromír ; Sedlaříková, Marie (advisor)
The thesis deals with a study of the various carbon materials for negative electrode of lithium ion accumulators. The object of the work is to gain the most knowledge about these materials and to project their possible improvements. In the first part of the work is described the latest knowledge about carbon materials and their application. In the following parts of the work is handled about manufacture,optimization of composition of electrode and the choice of carbon material for liquid and gel electrolyte.
|
|
|
Compatibility of negative electrode materials at system of lithium-ion battery
Šikuda, Milan ; Sedlaříková, Marie (referee) ; Libich, Jiří (advisor)
This thesis deals with a study of lithium-ion batteries. It is focused into negative electrode materials and electrolytes. In this thesis is presented synthesis, electrochemical properties, possibilities to improving negative electrode materials as LTO (Lithium Titanate Oxid) and graphite. These electrode materials were investigated with respect to their compatibility at electrolytes with carbonate solvents, Sulfolane and DMF (DiMethylFormamide) in detail. The main aim of this thesis is to characterize electrode materials and electrolyte properties depending on wide range of temperatures and their comparison for the purpose of achievement of the best solution. The thesis is divided into two main parts. The theoretical part of thesis describes composition, process of synthesis and analysis of lithium-ion cell. Practical part contains measuring and evaluating of charge-discharge and irreversible capacity characteristics related to variety of environmental temperatures.
|
|
|
Influence of conductive ceramics on the life of lead acid batteries
Tobolák, Jakub ; Vaněk, Jiří (referee) ; Bača, Petr (advisor)
This thesis is focused on lead-acid batteries used in hybrid electric vehicles. These cells work in specific conditions, particularly under partial charge referred to as PSOC. This fact is responsible for the premature loss of capacity cell lead-acid batteries and their short lifetime. The task of this thesis is to examine the effect of conductive ceramics as possible additives to the negative electrode active materials of lead-acid battery cells operating in a PSOC, in order to prolong their life.
|
|
|
Development of negative electrodes for lithium-ions batteries
Drahokoupil, Petr ; Libich, Jiří (referee) ; Sedlaříková, Marie (advisor)
This thesis deals with lithiation of negative electrode li-ion batteries. In this thesis is used several electrode materials: carbon, FeCl3, lithiated carbon electrodes and silicon carbide. Reduction of irreversible capacity lithium-ion batteries leads to increased capacity and also we can use new materials as a positive electrode. Thesis deals with the differences in the properties of materials using lithiation and their use in practice
|
|
|
Composite electrode materials for lithium-ion batteries based on LiFePO4 prepared using GAC method
Vilhelm, Ondřej ; Neoral, Jiří (referee) ; Čech, Ondřej (advisor)
Presented work investigates the problem of secondary lithium-ion cells and the different available cathode materials. We have prepared samples of LiFePO4 with the addition of different kinds of carbon materials such as Super P, Vulcan and expanded graphite. We have always created the sample with and without surfactant. Developed samples were compared by measuring electrochemical methods (cyclic voltammetry, charge and discharge cycles and impedance spectroscopy). We also modeled the three-point cell for measuring electrochemical electrode materials.
|
|
|
Electrodes for lithium-ions batteries based on LiCoO2
Nejedlý, Libor ; Čech, Ondřej (referee) ; Sedlaříková, Marie (advisor)
This master´s thesis deals with electrodes for lithium-ions batteries based on LiCoO2. The first part of the project is devoted to the characteristics of Li-ion batteries, electrochemical reactions and characteristics of electrode materials. The next part describes an experiment that deals with the effects of NA doping on performance of layered materials for lithium secondary batteries. The materials were measured by cyclic voltammetry, impedance spectroscopy and galvanostatic cycling.
|
guest ::
