National Repository of Grey Literature 46 records found  previous6 - 15nextend  jump to record: Search took 0.02 seconds. 
Stabilized operation and short - circuit conditions within E.ON 110 kV power network supplied from Čebín 110kV switching station, during the period of 2011
Chrástek, Radim ; Janda, Petr (referee) ; Blažek, Vladimír (advisor)
The aim of this thesis is to project an operation of bridge connection in distribution network in Čebín’s nodal area. The main task is to check a fulfilment of voltage tolerance in distribution substations 110 kV, load transformer control (400/110 kV, 110/VN kV), distribution power line 110 kV control and short - circuit conditions control. Relevant calculations are performed by dispatching control system, which works with the actual parameters of all distribution network‘s 110 kV facilities. The theoretical part of this thesis is devoted to the way of the calculation of stabilized operation and the short-circuit conditions. In practical part, first we perform an analyse of stabilized operation and the short-circuit conditions of distribution network 110 kV in actual operation. Next step deals with bridge connection design and analysing its operation. The operation of bridge connection is verificated even in specific conditions (disturbance state, increased load). The next section evaluates the results of the calculations. First we deal with actual operations evaluation and proposed the bridge connection. In the next section we evaluate the operation of the bridge connection in the specific operating conditions. Finally, we evaluate the losses in the distribution network 110 kV. If the calculations of the stabilized operation or the short-circuit conditions of distribution network discovers that some of its elements are overloaded, we propose changes to ensure safe and reliable operation of the distribution network.
Short Circuit Calculation of MV Grid
Knápková, Dagmar ; Topolánek, David (referee) ; Toman, Petr (advisor)
This bachelor’s thesis deals with the faults in the distribution networks, focusing on shortcircuits as the most common and the most signiĄcant types of faults. The thesis is divided into theoretical and practical part. In the theoretical introduction, describes the types of faults in distribution networks with a focus on the short-circiuts, their causes, and the impact on distribution networks. Follows a description of the time course of short-circuit currents, short-circuit calculation simpliĄcation assumptions, the formula for calculating the impedance of the various elements of the short-circuits schema and the calculation methods of short-circuit currents in accordance with ČSN EN 60909-0. In the practical part, there is an example of the calculation of simple network conĄguration. Follows an analysis of the real network, including the analysis of the method of operation and the selection of appropriate method for the calculation of the short-circuit. After that are carried out practical calculations short-circuit conditions in four places on the network, and three diferent types of short circuits. For one-phase short-circuit is subsequently carried out the distribution of currents in a parallel branch of the distribution lines. At the conclusion of the bachelor’s thesis is caried out evaluation the results and analysis of the data obtained by calculation.
Load Flow Calculation and Design of Distance Protection Relay Settings of 110 kV Overhead Line
Jasenský, Filip ; Vaculík, Petr (referee) ; Toman, Petr (advisor)
Bachelor thesis load flow calculation and design of distance protection relay settings of 110 kV overhead line acquaints with the theory calculation of steady operation, short-circuit conditions and a proposal setting the distance protection. The theoretical part is made an example of a simple calculation to show leadership methods of calculation. The practical part is a calculation of steady operation and short-circuit conditions. Short-circuit ratios are calculated for a single operation and parallel operation of transformers in Otrokovice. Calculated using the initial shock symmetrical output from the calculation of short-circuit conditions is verified by short circuit resistance of substations. The practical section setting the distance protection ABB REL 316*4 and compensation earth faults. Calculation of steady state and short-circuit conditions designed basic operational state of the network, for which the design of a distance protection relay settings.
Study of the Possibility of Extention of 110 kV substation in TKV
Poledník, Petr ; Grym, Rudolf (referee) ; Orságová, Jaroslava (advisor)
This project are deal with the posibility of extention of 100 kV substation in TKV. What is important for project is restriction of conditions for realization. The aim for project is create individual possibilities of solutions and consequently their evaluation.
The analysis of parallel operation variants of supply areas 110 kV Čebín and Sokolnice
Reiter, Martin ; Vaculík, Petr (referee) ; Toman, Petr (advisor)
The diploma thesis is focused on the analysis of parallel operation of Čebín and Sokolnice substations. Different variants of parallel operation are researched. A calculation of steady state by the iterative method is described in the theoretical part. The next part briefly mentions a short-circuit and dimensioning of conductors. The possibility of overloading of lines and transformers is discussed in the last chapter of the theoretical part. The current state of the situation is described in the practical part. Main goal of the practical part of the diploma thesis is to design a configuration capable to parallel operation. Also another configuration of supply of this area is designed. There must be no direct connection between Čebín and Sokolnice substations on 110kV level in this configuration. This configuration should eliminate a transit flow of power. Each configuration has to fulfill the requirements on the steady state and on short-circuit current capability. One of the last chapters is focused on the steps, that should by undertaken to prevent transit flow of power.
Program for the calculation of short - circuit conditions in a power system
Bucholcer, Oto ; Václavík, Vlastimil (referee) ; Blažek, Vladimír (advisor)
This master's thesis consists of three parts. The theoretical part deals with short-circuit conditions in the electricity supply system and with the method of their calculation. The practical part includes the programming process of a programme; description of programme properties and functionality. The third part contains the verification of an accurate programme calculation of the examples.
Short - circuit conditions at Sokolnice 110 kV switching station following a direct 400/110 kV transformation
Hajdú, Lukáš ; Paar, Martin (referee) ; Blažek, Vladimír (advisor)
The goal of this bachelor´s thesis is to evaluate short-circuit conditions at the Sokolnice 110kV switching station before and after installation of a T402 transformer – before and after application of a direct 400/110kV transformation. By evaluating these conditions determine whether the originally installed protective elements (power circuit-breakers) are capable of fulfilling the new short-circuit requirements at the switching station. The thesis consists of two parts: the first part introduces the theory required to evaluate the short-circuit conditions at the switching station, while the second part calculates the actual short-circuit currents and power outputs. The methods used for calculation are sequential simplification and symmetrical components.
Short Circuit Currents in the Sokolnice 110 kV Switching Station with Direct 400/110 kV Transformation Applied
Klimeš, Jiří ; Špaček, Jaroslav (referee) ; Blažek, Vladimír (advisor)
Klimeš Jiří Department of Electrical Power Engineering Faculty of Electrical Engineering and Communication Short Circuit Currents in the Sokolnice 110 kV Switching Station with Direct 400/110 kV Transformation Applied doc. Ing. Vladimír Blažek, CSc. 51 p. This bachelor's thesis refers to the calculation short-circuit currents. The challenge is to evaluate short-circuit resistance switching station 110 kV Sokolnice that matches the direct transformation of 400/110 kV.
Calculation of HV line distance relay setings
Pustowka, Pavel ; Vaculík, Petr (referee) ; Toman, Petr (advisor)
This work is divided into practical and theoretical part. The first part deals with defective states on ehv lines, especially short-circuits and their calculation, further discusses about distance protections and the theory necessary for their correct adjustment. The second part contains practical calculation of short-circuit conditions and adjustment for distance protection on selected part of 110 kV network, belonging to EO.N company. The result of the work are values needed for adjustment all distance protection in entered part of the network.
Short-circuit Calculation of Local Distribution Network
Byrtus, Jiří ; Paar, Martin (referee) ; Topolánek, David (advisor)
This thesis deals with transient phenomena in the electricity grid - especially with short-circuits. First part describes short-circuit types, reasons for their commencement and also consequences of their functioning. The thesis further shows waveforms of short-circuit currents and its components. A method of calculating short-circuits currents, using the constituent systems and the basic equations for calculating short-circuit impedances are also mentioned here. Relations and methods are based on valid standards of IEC 60909 – 0. The second part indicates the calculation of two-phase and three-phase short-circuit currents for specific network of industrial building. This calculation aims to verify the dimensioning of substations for short-circuit currents after connecting a synchronous generator with given power to the main substation.

National Repository of Grey Literature : 46 records found   previous6 - 15nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.