National Repository of Grey Literature 67 records found  beginprevious58 - 67  jump to record: Search took 0.00 seconds. 
Permanent deformation on asphalt mixtures
Bambulová, Lucie ; Coufalík, Pavel (referee) ; Hýzl, Petr (advisor)
The bachelor thesis deals with a description of the laboratory properties of aged bituminous binders in relation to permanent deformation. The theoretical part deals with the empirical tests: needle penetration and softening point. There is also explained the procedure and the principle of the MSCR test. In the practical part are evaluated the properties of fifteen tested bituminous binders and based on the results are made two plates which are tested to permanent deformation.
Usage of of common reclaimed asphalt in asphalt mixtures
Přívara, Jakub ; Coufalíková, Iva (referee) ; Dašek, Ondřej (advisor)
The bachelor thesis is focused on adding of RAP (reclaimed asphalt pavement) to the wearing asphalt courses flexible pavements. Specifically it is SMA 11S asphalt mixture. The theoretical part describes issues of ecology and recycling. The practical part deals with bitumen recovery from SMA mixtures with different added ratios of RAP and assessment of basic empirical and functional tests on the bituminous binder. The verification of properities of modified bituminous binder used in this quality SMA mixtures is also introduced.
Force ductility of asphalt binders
Smolka, Zdeněk ; Coufalík, Pavel (referee) ; Dašek, Ondřej (advisor)
The bachelor thesis describes a laboratory characteristics of bituminous binders. There will be described the principle and results of laboratory tests, needle penetration, softening point by ring and ball and force ductility. The tests will be performed on samples of the bituminous binders with different degrees of modification.
Ageing of asphalt binders
Střasáková, Monika ; Hegr, Zdeněk (referee) ; Dašek, Ondřej (advisor)
The theoretical part of this thesis describes the rheology of bituminous binders, aging of asphalt binders and laboratory methods simulating short and long term aging. The following describes an empirical tests (needle penetration, softening point ring ball method) and functional tests (complex shear modulus and phase angle, dynamic viscosity), which are performed in the dynamic shear rheometer. At the end of this section, laboratory aging of bituminous binders using method RTFOT and method RTFOT + PAV is described in more detail. In the practical part of this thesis, the results of all tests performed on the binders aged using RTFOT + PAV are introduced and compared with results of properties of non-aged binders and binders aged by 3xRTFOT.
Shear stress relaxation of bituminous binders in DSR
Musil, Vladimír ; Hegr, Zdeněk (referee) ; Dašek, Ondřej (advisor)
The thesis describes the relaxation properties of bituminous binders determined in dynamic shear rheometer (DSR). Paving bitumen, polymer modified bitumen (PMB) and crumb rubber modified bitumen (CRmB) were chosen for comparison. In order to describe the effects of ageing on asphalt binders relaxation properties, the laboratory simulation of ageing using RTFOT and 3xRTFOT method was performed. For each binder were simultaneously conducted tests of needle penetration, softening point and elastic recovery. Selected bitumens were used for the production of asphalt mixtures. The low-temperature properties tests (TSRST) were performed for these mixtures, when the results were compared to the relaxation properties of binders determined in the DSR.
Ageing of asphalt binders and mixtures
Štěpanovský, Vlastimil ; Komenda, Radek (referee) ; Hýzl, Petr (advisor)
Diploma thesis is particularly focused on ageing of asphalt mixtures and asphalt binders. In the theoretical part an array of methods simulating short term and long term ageing consequently is introduced. The main objective of the practical part was to carry out the long-term ageing test method BSA (Braunschweiger Alterung). Thereafter, specimens testing for stiffness properties according to CSN EN 12697-26 were made. After conducting the measurement on those, asphalt binder was extracted and processed to follow-up testing. The testing consisted of a range of methods – Penetration CSN EN 1426, Ring and Ball test CSN EN 1427, Determination of the Frass breaking point CSN EN 12593, Determination of complex shear modulus CSN EN 14770 and Dynamic viscosity using a dynamic shear rheometer (DSR). The given results were assessed in the last part in order to evaluate the rate of the binder degradation caused by the method BSA.
Rheological properties of binders
Hotař, Petr ; Fišer,, Jiří (referee) ; Kudrna, Jan (advisor)
The comparison of rheological properties (complex shear modulus and phase angle and dynamic viscosity) of four paving bitumens and two polymer modified bitumens is performed in this diploma thesis. Furthermore, the empirical tests (needle penetration and softening point) were determined on these binders. Effect of asphalt binders aging was modeled using RTFOT test and modified RTFOT test (3 x RTFOT).
Design of asphalt mixtures with the use of higher amount of RAP
Pavličík, Petr ; Matoušek, David (referee) ; Varaus, Michal (advisor)
In the introduction of the Master’s thesis describes for obtaining and processing of reclaimed asphlalt. Major point of the thesis is design of asphalt mixtures with use of higher amount of RAP for asphalt binder course. Asphalt mixtures were designed with contents of 0%, 30%, 50% and 70% of RAP. On each asphalt mixtures were compared parameters set out by functional tests – resistence to permanent deformation and resistence to water.
Resistance of bituminous binder to ageing
Rous, Vojtěch ; Frýbort, David (referee) ; Kudrna, Jan (advisor)
Asphalt binder ageing and experiences with various ageing methods from abroad are described in this thesis. The practical part deals with the RTFOT aging and with the influence of the duration of this test. The comparison of test results is conducted before and after the aging by values of needle penetration, elastic recovery, softening point and resilience tests are evaluated and compared.
Properties of binders suitable for hot applied sealants and bituminous membranes
Musil, Vladimír ; Dašek, Ondřej (referee) ; Kudrna, Jan (advisor)
The work describes the basic laboratory characteristics of selected asphalt binders that could be suitable for hot applied sealants and bituminous membranes. Paving grade bitumen, polymer modified bitumen, asfalt-rubber and polymer modified bitumen with crumb rubber addition were used. Properties of binders were compared using tests of dynamic viscosity, needle penetration, cone penetration, softening point, resilience and elastic recovery.

National Repository of Grey Literature : 67 records found   beginprevious58 - 67  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.