|
|
Reinforced concrete structure
Malecha, Tomáš ; Šimůnek, Petr (referee) ; Šulák, Pavel (advisor)
This bachelor‘s thesis includes structural analysis and check of reinforced concrete, cast-in-place construction of a building for parking. Here is solved locally supported floor slab above first above ground floor. Structural analysis was solved by program Scia Engineer 14 and checked by manual calculation. Next step was dimensioning for ultimate limit state, concretely for bending moment, punching and for serviceability limit state, concretely for limitation of cracks. For this bachelor’s thesis were made drawings based on calculated results.
|
|
|
Selected structural detail of the reinforced concrete frame
Teplý, Jakub ; Matušíková, Anna (referee) ; Girgle, František (advisor)
The bachelor thesis solves and compares between them three methods (ČSN EN 1992-1-1, ČSN 73 1201, MC 2010) of punching shear slabs. In this thesis are the methods analyzed and compared with each other. In other part of thesis is solved and compares dependence of the required shear reinforcement areas on the various parameters, for example thickness of slabs or percentage of reinforcement. Conclusion provide an evaluation of the results and compared in charts course of dependence of the required shear reinforcement under the same conditions state.
|
|
|
Reinforced concrete structure
Zatloukal, Bohuslav ; Bažant, Zdeněk (referee) ; Šulák, Pavel (advisor)
This bachelor project is focused on the design of monolithic reinforced concrete ceiling structure of the first floor of a hotel and creation design documents of the load-bearing elements. The load-bearig elements (ceiling slab, outer rib, column and core wall) are appraised according to ultimate limit state. For calculation of internal forces was used a software named RFEM and the internal forces were verified by simplified manual method. Assessment is done according to ČSN EN 1992-1-1.
|
|
| |
|
|
Reinforced concrete structure of a administrative building
Januš, Ondřej ; Švaříčková, Ivana (referee) ; Šulák, Pavel (advisor)
The main subject of this bachelor thesis is focused on the design of reinforced concrete locally supported slab of a multifunction building. Internal forces are calculated by a computer software SCIA Engineer and its resultes are compered with simplifield method. Another part includes the design of a reinforced concrete stairway and a column situated in the center of the disposition. The calculation method is based on ČSN EN 1992-1-1.
|
|
| |
|
|
Load bearing structure of administrative building
Kudrna, Jan ; Perla, Jan (referee) ; Šimůnek, Petr (advisor)
The bachelor thesis deals with the design and assessment of reinforced concrete load bearing structure office building of two floors above ground and one basement floor. During the design were appropriately combined manual idealized models solved structures with complex models of selected parts of the structure calculation by finite element method. Were assessed elements: locally supported ceiling structure above the first slab above, three reinforced stairs and beam. All selected elements were assessed at the ultimate limit state, reinforced concrete slab and the serviceability limit state.
|
|
|
Reinforced concrete structure of a multifunction building
Mengler, Tomáš ; Strnad, Jiří (referee) ; Šulák, Pavel (advisor)
The bachelor´s thesis „Reinforce concrete structure of multifunction building“ is deal with design of a department store construction. The aim is evaluace the ultimate limit state of reinforced concrete slab over the first floor. The analysis of the locally supported slab is performed by software on principle MKP, was choosen Scia Engineer 2012 software. The method of the sum of the moments is verify values of internal forces. In addition, the slab is assesed for pushing through. The last part of static calculation is assessment of a reinforced concrete pillar and a foundation block. The work is accompanied by drawings
|
|
|
Reinforced concrete structure of an office buildings
Přikryl, Martin ; Šimůnek, Petr (referee) ; Šulák, Pavel (advisor)
The bachelor project is focused on the design of monolithic reinforced concrete ceiling slab of typical floor of an administrative building. Calculation of internal forces is carried out in a computer software SCIA Engineer with manual verification using the simplifield method. Assessment is done according to Eurocode 2 (ČSN EN 1992-1-1).
|
|
|
Proposal and Design of the Flat Plate Slab
Ducháč, Josef ; Šimůnek,, Petr (referee) ; Švaříčková, Ivana (advisor)
The Bachelor´s thesis is focused on the analysis, design and assessment of the Flat Plate Slab. The Slab is located in multifunctional complex of winter stadium. All construction is made from reinforced concrete. The thesis solves various ways to create computational models. The thesis includes working-out of static calculation, drawing shape, reinforcement drawing of the Flat Plate Slab and the elaborate comparison with computational models.
|
guest ::
