|
|
Gas Boiler for Blast Furnace and Coke Gas Mixture Combustion
Dohnal, Jakub ; Svoboda, Petr (referee) ; Svoboda, Petr (referee) ; Lisý, Martin (advisor)
This diploma thesis deals with the constructional and calculation design of boiler for blast furnace and coke gas mixture combustion, including sizing of the heating surfaces. The opening section is dedicated to a brief characterization of burned fuels. The following chapter shows the parameters and composition of the resulting fuel mixture. The main part of this thesis involves; determining the stoichiometric amount air required for combustion and the resulting flue gas, determining the boiler efficiency and steam production rate, calculations regarding the combustion chamber and the detailed design of the individual heat exchangers. At the end of the thesis the heat balance of the entire boiler is verified. Drawing documentation of boiler is also part of this diploma thesis.
|
|
|
Design of steam boiler in waste to energy plant
Reiskup, Matěj ; Tomáš, Weigner (referee) ; Skála, Zdeněk (advisor)
The thesis deals with the design of the boiler to combustion of mixed communal waste. The introductory chapters present introduction of the problem, short explanation about fuel of the boiler and speciality of the boiler to combustion of mixed communal waste. The main part is the heat calculation of the boiler, which consists of stoichiometry of the combustion, heat losses, then disposition of heat performances to individual exchange surfaces. In the end is summary of calculation and knowledge consequent of the calculation.
|
|
|
Design of Steam Boiler
Kadlec, Tomáš ; Nechvátal, Ondřej (referee) ; Skála, Zdeněk (advisor)
This thesis is focused on design of black coal combustion boiler of 160t/h output. It consists of several parts. First, stechiometric calculations and enthalpy of air and gas are made, then heat balance of boiler and the boiler losses are calculated, and also thermal efficiency is determined. In next step, the combustion chamber is designed and its thermal calculation is made. Then, each of heating surfaces are designed, and in the last step overall energy balance of the boiler is checked. The scheme of pressure system and design documentation added.
|
|
|
Draft boilers for co-firing natural gas and blast furnace gas
Šebela, Jakub ; Svoboda, Petr (referee) ; Baláš, Marek (advisor)
The aim of a diploma thesis is design of draft boiler for co-firing blast furnace gas and natural gas. In the first part is made the stoichiometric calculation for the gas mixture. Next is the proposal of combustion chamber and proposal of individual heating surfaces of boiler. Next part contains the thermal calculation and control of individual heating surfaces. Part of the work is also drawing documentation of boiler.
|
|
|
Boiler for Brown Coal Combustion
Pavlo, Matej ; Hoffman, Pavel (referee) ; Skála, Zdeněk (advisor)
The aim of the master’s thesis is thermal calculation and dimensional design of boiler of 235 t/h which burns brown coal. The work is divided into several parts. In the first part, stoichiometric calculation and the calculations enthalpy of flue gases and air are performed. After calculating the heat balance and loss of the boiler, the boiler efficiency is counted. In the next part, thermal calculation of combustion chamber is calculated. Subsequently, design of the individual heating surfaces is proposed. Finally, the overall heat balance of the boiler is inspected. The calculation is supplemented by drawing of the boiler.
|
|
|
Grate Boiler for Biomass and Coal Co-combustion
Baláži, Martin ; Ryšavý, Milan (referee) ; Skála, Zdeněk (advisor)
This thesis solves a design of a grate boiler burning wood chips or brown coal with a heat output of 160 MW. Stoichiometry flue gas is calculated according to the specified composition of each fuel. The dimensions of the individual heating surfaces are primarily calculated for burning wood chips and subsequently checked for the combustion of brown coal. Design of the boiler is completed by checking the overall heat output. Boiler design is accompanied by drawing documentation.
|
|
| |
|
|
Steam boiler with grate firing , burning coal or wood biomas 200 t/ h, 9,3 MPa 520°C
Čech, Jaroslav ; Hudeček, Mirko (referee) ; Skála, Zdeněk (advisor)
The aim of the work is the design of a grate boiler of 200 t . h-1 output, which will burn brown coal or wood chips. The work is divided into several parts. First, stoichiometric calculation and the calculations enthalpy of flue gases and air are performed. After calculating the heat balance and loss of the boiler was counted boiler efficiency. The design of individual heating surfaces is proposed and at the end are controlled the overall heat balance of the boiler. The calculation is supplemented by drawings.
|
|
|
Grate Boiler for Wood Chips Combustion
Kozák, Tomáš ; Kohout, Přemysl (referee) ; Lisý, Martin (advisor)
The thesis is dedicated to the design of the steam boiler which burns wood chips, with a natural circulation of the water. It is a grate boiler, which produces 20 t/h of the steam. The output parameters of the steam are 420 °C and 5 MPa. The feedwater temperature is 125 ° C .The thesis gradually deals with stoichiometric calculations and determines the efficiency of the boiler. Then it describes the design of the fireplace and thermal calculations of each heat transfer surfaces. The appendix includes drawings of the boiler.
|
|
| |
guest ::
