|
|
PmB - Polymer modified bitumens
Venclíková, Michaela ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
In this bachelor thesis, there are described modified bitumens. The issue of modified bitumens will be explained in the theoretical part. In the practical part, it will be prepared set of modified bituminous binders with different degree of modification. Basic empirical testing and functional testing will be determined. The aim of thesis is to find the optimal source of unmodified bitumen for modification.
|
|
|
Evaluation of properties of asphalt binder from waste materials containing bitumen
Košťálová, Aneta ; Hegr, Zdeněk (referee) ; Dašek, Ondřej (advisor)
The bachelor's thesis deals with the comparison of the properties of two types of asphalt binders obtained from waste materials. The theoretical part contains the properties of bitumen waterproofing sheet and asphalt shingles. In the following practical part, tests of asphalt binders on individual samples are described and then carried out. These include tests to determine needle penetration, softening point by the Ring and Ball method, determination of the elastic recovery and determination of rheological properties by DSR. Finally, the results are evaluated, summarized and compared with each other.
|
|
|
Influence of virgin bitumen on the properties of polymer modified bitumens
Kamanová, Monika ; Koudelka, Tomáš (referee) ; Dašek, Ondřej (advisor)
The diploma thesis describes the influence of the used input paving bitumen on the properties of the produced polymer modified bitumen. The theoretical part explains parameters of asphalt binders and improving their properties after using modifying additives. The second part is explaining methods and test results. The empirical tests (needle penetration, softening point, breaking point) and performance tests in dynamic shear rheometer and bending beam rheometer are used for comparison of binders properties. In the conclusion the laboratory aging of asphalt binders is described by RTFOT and RTFOT+PAV method.
|
|
|
Influence of temperature on the penetration of asphalt binders
Koblížek, Ondřej ; Koudelka,, Tomáš (referee) ; Dašek, Ondřej (advisor)
The bachelor thesis deals with an influence of temperature on the needle penetration results of tested bitumens in various test temperatures. The theoretical part describes the issue of laboratory tests in the world. This work also describes the american research program called SHRP (American Highway Research Program). The following part explains used test methods in detail (determination of needle penetration, determination of the softening point – ring and ball method). The practical part briefly introduces used materials and determines the results of laboratory tests and their comparison.
|
|
|
Use of an additive suitable for additional modification of the asphalt mixture
Machová, Sára ; Hegr, Zdeněk (referee) ; Dašek, Ondřej (advisor)
This thesis deals with the modification of asphalt binder 50/70 with fast reacting SBS. This is a relatively new additive that should be able to improve the binder properties during mixing of the asphalt mix at the plant. In the theoretical part, the issue of asphalt-mixing plant and polymer modification additives is presented. Furthermore, the test methods used such as needle penetration, softening point, determination of the elastic recovery, DSR and MSCR are described. Several modified binder samples were developed for the tests, in which mixing temperature, mixing time and SBS content were combined. The results of each test were compared and evaluated at the end of the thesis.
|
|
|
Properties of Polymer Modified Bitumens with Addition of Aged Rap Binder
Sachr, Jiří
The aim of this paper is to describe the effect of adding different amounts of aged binder recovered from RAP on the change in properties of polymer modified bitumen 45/80-65 and polymer modified bitumen referred to as 45/80 RC, which is a binder suitable for cementing asphalt mixtures containing high amounts of RAP. It is also an effort to evaluate the changes in properties of these blended asphalt binders caused by laboratory simulation of aging by rolling thin film oven test (RTFOT) and pressure aging vessel (PAV). Both RAP containing unmodified asphalt binder and RAP obtained from an asphalt mixture that can be assumed to contain polymer modified bitumen are used to recover the aged binders. The aged binder obtained from the RAP is dosed into the fresh binder at 0 %, 15 %, 30 % and 50 %.
|
|
|
Evaluation of properties of clear and pigmented asphalt binders
Kamanová, Monika ; Machalla, Michael (referee) ; Dašek, Ondřej (advisor)
The Bachelor thesis subject is comparison of the chosen parameters of clear asphalt binder with pigmented asphalt binder. The theoretical part explains parameters of asphalt binders and improving their properties after using additives. The second part is explaining methods and test results. The empirical tests (needle penetration, softening point, breaking point) and performance tests in dynamic shear rheometer and bending beam rheometer are used for comparison of binders properties. In the conclusion the laboratory aging of asphalt binders is described by RTFOT and RTFOT + PAV method.
|
|
|
Influence of boundary conditions on the aging index of asphalt binders
Štohlová, Barbora ; Koudelka, Tomáš (referee) ; Dašek, Ondřej (advisor)
The bachelor thesis deals with an influence of several boundary conditions on the aging index of various modified asphalt binders. In the thesis there is rheology and modification of asphalt binders, types of ageing (short-term, long-term) and used tests (needle penetration, softening point, complex shear modulus, phase angle, aging tests) described. In the second part there is a brief description of used materials and comparison of the test results on these materials.
|
|
|
Influence of aging on selected properties of asphalt binders
Rimel, Jindřich ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
In this bachelor’s thesis, the properties of four asphalt binders with different degree of modification are compared. The influence of aging on their properties is examined. In the theoretical part, the types of aging, their impact on binders, basic laboratory methods of aging and the details of performed tests are explained. In the practical part, the results of tests are evaluated and the change of properties before and after aging are compared.
|
|
|
Evaluation of properties of PMB containing binder from RAP
Měšťanová, Petra ; Hýzl, Petr (referee) ; Dašek, Ondřej (advisor)
Subject of this diploma thesis is to describe the effect of adding different amount of aged binder recovered from RAP on the change of properties of polymer modified bitumen. The RAP containing unmodified bitumen and the RAP where we can expect bitumen modification are used to recover binder. The binder obtained from RAP is dosed into the virgin binder in amount of 15 %, 30 % and 50 %. The methods of recycling of flexible pavements, extraction and regeneration of asphalt binders, rejuvenating of their properties and methods of empirical and functional laboratory tests are described in the theoretical part. The practical part deals with evaluating and comparison of the results mixed binders properties.
|
guest ::
