|
|
Návrh svítidla
Syslová, Jana
The goal of this bachelor thesis is to design a light fixture. The thesis has two main parts. First part is theoretical, describing basic light quantities, perception of light, historical development of light fixtures, typology and distribution of light fixtures, basic parts of light fixtures, light sources and illumination of the interior. The information found in the theoretical part are going to be bases for designing a light fixture that meets all the right principles of lighting of interior. Second part is a practical part focused on prototype production implying researche of light fixtures, light design, concept of work, selection of design, visualization, material variants, assemble and technological solution.
|
|
|
Design svítidla
Mečířová, Markéta
The main task of this thesis is to design and build a life-size functional model of a table lamp. The written part is divided into two parts. The first, theoretical part, is focused on clarification of terms as regards the physical properties of light, the creation and history of light fittings and light sources, correct illumination of space, subdivision of light fittings, a description of the parts of light fittings and materials used to manufacture them. The second, practical part, contains research into table lamps on the contemporary market, a description of the development of the lamp from the first visualisations, all the way through to building of the model, a detailed description of materials used and the technical design of the light fitting.
|
|
|
Luminaire position influence on measured parameters in integrating sphere.
Vlček, Pavel ; Škoda, Jan (referee) ; Motyčka, Martin (advisor)
This bachelor thesis deals with the influence of the position of luminaires with narrow radiation characteristics when measured in the integrating sphere. The basic light technical parameters are summarized here. Especially, luminous flux, illuminance, solid angle, luminous intesity and luminance, followed by colour temperature and general colour rendering index. This thesis also deals with the measuring instruments, at first with the basic element, which is the photoelement and then with the following instruments: the illuminance meter, the luminance meter, the spectroradiometer, the goniophotometer and the integrating sphere. The thesis is summarization of the basic information about luminaires. This theory is followed by a laboratory measurement that deals with the measurement of luminaires on a goniophotometer and in the integrating sphere. Goniophotometer measurements are important in conditions of acquire accurate luminous flux. The luminous flux from the goniophotometer is compared with the single measured values in the set positions when measured in the integrating sphere. As a result, the position of the luminaire in the integrating sphere is influenced
|
|
|
Design of indoor lighting in a trend of Human Centric Lighting
Ruml, Filip ; Baxant, Petr (referee) ; Antoš, Martin (advisor)
The main tasks of the thesis lie in summary of present state in Human Centric Lighting field, in the optical design of luminaire and in practical verification of the proposal. The design is developed in software LightTools and for the verification of functionality the software Dialux EVO is employed. The luminaire is designed primarily with respect to the influence of light on the man and the physiological, psychological and behavioural responses in humans. The thesis is created in cooperation with the company Robe Lighting s.r.o. The proposal of the luminaire corresponds to the current state of knowledge in the area of light influence on humans. The designed luminaire in the trend HCL is distinguished by the high quality of emitted light but also with higher costs of the operation.
|
|
|
Design of lighting system in high school
Borůvka, Jan ; Štěpánek, Jaroslav (referee) ; Škoda, Jan (advisor)
The theoretical part is focused on lights, notions and calculations in the area of light technology, basic lightning sources and lamps. This work is also about the principle of lightning measuring. The main aim of the work is design of a new artificial lightning system in a High school agriculture in Prerov. At first, the control measuring of existing lightning was done which is mentioned in this work. From the results of control measuring is clear, that existing lighting system in classroom does not suit requirements, which are mentioned in the valid technical norm. Design of a new lightning system meets the requirements in all of the rooms in the building of school. Design of lightning system was done in two variants. The first variant uses lamps with fluorescent tube light sources. The second variant uses lamps with LED light sources. Also is here evaluated financial difficulty of possible installation and comparation of each variants with respect energetic difficulty.
|
|
|
Analysis and Innovation systems of Vehicle Lighting
Straka, Ondřej ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
Subject semestral thesis is diagnosis primary objective luminosity plus elaboration background research primary objective plus modern waies lighting. Work includes indicative allocation light fitting, systems plus possibilities increasing safeness on roads by using modern systems facilitating movement and behind handicap. Are here also circumscribed systems facilitating visibility in night o'clock plus manners realization of all these systems.
|
|
|
Design svítidla
Jelínková, Barbora
The aim of the thesis is to design a series of lighting. The thesis includes a brief history of the lighting production, revises possibilities of power systems used for lighting, and describes their parameters as well as usability. It covers information about types of lights and their features; mentions also current trends in the industry. The most important rules for the lighting systems, which should be kept to create appropriate living environment, are specifically described in the thesis. The practical part covers the process of designing and designer's work flow. The outcome of whole study are 3 original lights designed by the author. The practical part also includes competition overview; sketches; drafts of material and construction solutions; visualisation and prototype production.
|
|
| |
|
|
The Lighting of Liturgic Space
Jedličková, Veronika ; Přikryl, Miroslav (referee) ; Zdařil, Zdeněk (advisor)
The bachelor thesis deals with the lighting of aisles, chapel and space under the chior in St. John the Baptist’s church in Frýdek-Místek. The thesis has two parts. The first part focuses on whole concept of lighting, also location of lighting fixtures and its impact on the overall space effect. The second part is the design of the luminaire, respecting the specifics of the space. The luminaire is also trying to satisfy the lighting requirements established by the local parish council.
|
|
|
Electrical installations in apartment building
Novotný, Jan ; Formánek, Marian (referee) ; Doležalová, Jana (advisor)
This bachelor's thesis deals with electrical wiring in apartment building. The aim is to describe the types of distribution networks, implementation possibilities of service lines, describe the individual parts of the wiring in the building and the principles of their implementation. Further describe basic electrical materials and to explain the design of artificial lighting. In the practical part the information applied to a particular apartment building, together with the calculation of the estimated annual energy consumption of flats. For the apartment building project is created in the form of engineering report and drawings.
|
guest ::
