|
| |
|
|
Physicochemical and structural analysis for characterization of native and modified humic acids
Solanský, Pavel ; Sovová, Šárka (referee) ; Enev, Vojtěch (advisor)
This bachelor thesis is focused on structural and physicochemical characterization of native and methylated humic acid. These samples of humic acids, which were isolated from oxidized brown coal Leonardite, were characterized by thermal and spectrometric methods. The following analytical techniques were selected to determine the structural and physico-chemical changes between native and methylated humic acid: thermogravimetry (TGA), elemental analysis (EA), molecular absorption spectroscopy (UV/Vis), Fourier transform infrared spectroscopy (FTIR), fluorescence spectroscopy and last but not least nuclear magnetic resonance (13C NMR). The aim of this bachelor thesis was to find the differences in the structure of selected humic acids and also to verify the suitability of the techniques, which were used to characterize these biocolloid substances.
|
|
|
Hydration of biocolloids - calorimetric study
Šméralová, Ester ; Pekař, Miloslav (referee) ; Klučáková, Martina (advisor)
Presented master's thesis focuses on the study of hydration of selected biocolloid substances, specifically humic substances (humic acids and fulvic acids), hyaluronic acid with three different molecular weight, chitosan and dextran. Interaction of biocolloids with water was studied by different methods. The effect of solubility, structure, functional groups in molecule on sorption and hydration ability of these biocolloids was investigated. In the case of hyaluronan the influence of molecular weight was also study. Differential scanning calorimetry DSC and perfusion calorimetry give results of heat of hydration, enthalpies and temperature of crystallization and melting. Thermogravimetric analysis TGA was used to determine the original moisture content of the samples.
|
|
|
Ultrafine combustion particles
Sitek, Tomáš ; Skála, Zdeněk (referee) ; Skála, Zdeněk (referee) ; Pospíšil, Jiří (advisor)
This diploma thesis deals with issues of fine and ultrafine particles formation during thermal decomposition and combustion of biomass. An introduction is devoted to a utilization of biomass as fuel. A following part describes the gas products emerging generally during combustion process. A current emission and air pollution situation in the Czech Republic as well as the health impacts of solid pollutants on human are also mentioned. Within an experimental measurement three basic factors that have impact on fine particles formation during combustion of beech wood (i. e. oxygen content in combustion atmosphere, type of the sample and size of the sample) were thoroughly analyzed. Attention was paid to a progress of thermal decomposition and combustion of sample with respect to the particles formation. Finally, a measurement of fine particles amount was accomplished in a real boiler successively with four different biomass pellet types.
|
|
|
Ionic polyacetylene type polymers and polymer networks by catalyst-free quaternization polymerization
Faukner, Tomáš
(Doctoral Thesis, 2016, Mgr. Tomáš Faukner, IONIC POLYACETYLENE TYPE POLYMERS AND POLYMER NETWORKS BY CATALYST FREE QUATERNIZATION POLYMERIZATION) The composition and structure of a series of ionic π-conjugated poly(monosubstituted acetylene)s prepared via catalyst-free quaternization polymerization (QP) of 2-ethynylpyridine (2EP) activated with equimolar amount of alkyl halide [RX = ethyl bromide, ethyl iodide, nonyl bromide and haxadecyl (cetyl) bromide] as a quaternizing agent (QA) have been studied in detail. The performed QPs gave ionic polymers well soluble in polar solvents, with approximately half of pyridine rings quaternized, which implies that also non-quaternized monomers were involved in the process of QP. The configurational structure of polyacetylene main chains was suggested based on 1 H NMR, IR as well as Raman (SERS) spectral methods. The QPs in bulk gave more expected irregular cis/trans polymers while the QPs in acetonitrile solution gave high-cis polymers. A series of prepared symmetrical bi-pyridylacetylene based monomers has been polymerized via QP approach resulting into a series of new ionic π-conjugated poly(disubstituted acetylene) type materials. It is therefore obvious that the mechanism of quaternization activation frequently applied on monosubstituted...
|
|
|
Ionic polyacetylene type polymers and polymer networks by catalyst-free quaternization polymerization
Faukner, Tomáš ; Zedník, Jiří (advisor) ; Balcar, Hynek (referee) ; Sedlařík, Vladimír (referee)
(Doctoral Thesis, 2016, Mgr. Tomáš Faukner, IONIC POLYACETYLENE TYPE POLYMERS AND POLYMER NETWORKS BY CATALYST FREE QUATERNIZATION POLYMERIZATION) The composition and structure of a series of ionic π-conjugated poly(monosubstituted acetylene)s prepared via catalyst-free quaternization polymerization (QP) of 2-ethynylpyridine (2EP) activated with equimolar amount of alkyl halide [RX = ethyl bromide, ethyl iodide, nonyl bromide and haxadecyl (cetyl) bromide] as a quaternizing agent (QA) have been studied in detail. The performed QPs gave ionic polymers well soluble in polar solvents, with approximately half of pyridine rings quaternized, which implies that also non-quaternized monomers were involved in the process of QP. The configurational structure of polyacetylene main chains was suggested based on 1 H NMR, IR as well as Raman (SERS) spectral methods. The QPs in bulk gave more expected irregular cis/trans polymers while the QPs in acetonitrile solution gave high-cis polymers. A series of prepared symmetrical bi-pyridylacetylene based monomers has been polymerized via QP approach resulting into a series of new ionic π-conjugated poly(disubstituted acetylene) type materials. It is therefore obvious that the mechanism of quaternization activation frequently applied on monosubstituted...
|
|
|
Biosensors based on modified nanoparticles
Mihajlović, Ana ; Majzlíková, Petra (referee) ; Hubálek, Jaromír (advisor)
This thesis deals with biosensors based on modified semiconductor quantum dots(AIIBIII). This work is divided into three main parts. The first deals with the theory necessary for the use of QDs in bioapplications, there are described methods of synthesis, application and bioconjugation of QDs . In the practical part, GSH-CdTe, CdTe-MPA and TGA-CdTe quantum dots were prepared by direct colloidal synthesis. These quantum dots were then modified by EDC in order to increase affinity to BSA (bovine serumalbumin). For the analysis of samples were used Infinite M200,Tecan and HORIBA Jobin Yvon FluoroLog detector Quanta . The third part is the summary of results and work achievements.
|
|
|
Mechanical propertties gel polymer aprotic electrolytes
Bárta, Vladimír ; Musil, Michal (referee) ; Sedlaříková, Marie (advisor)
This work deals with the measurement of electrical conductivity and mechanical properties of gel polymer electrolyte containing Lithium ion and their preparation. The theoretical part deals with the development of gel polymer electrolyte, their use and methods of measurement of electrical conductivity and mechanical properties. In the experimental part describes the preparation of gel electrolyte, the measurement of electrical conductivity, temperature dependence and the measurement of mechanical properties.
|
|
|
Properties comparison of two products used for skating rink based on ehtylene-propylene-dien rubber
Kostková, Jana ; Kučera, František (referee) ; Bálková, Radka (advisor)
This master thesis deals with characterization of two black and white products based on ethylene-propylene-diene rubber (EPDM) used for skating rink. Products marked with A and are different in their diameter of circular tubes trough which cooling medium passes and also in the distance of these tubes. Both of materials were characterized in order to determine whether it is the EPDM and how are they different. The characterization methods were used: differential scanning calorimetry, thermogravimetric analysis, attenuated total reflectance Fourier transform infrared spectroscopy, tensile test, swelling test, thermooxidative test. The composition of both materials, including fillers and others additives is almost the same but difference is in structure of EPDM and probably also in interaction with fillers, what exhibits different mechanical properties, thermooxidative stability and thermal capacity. These differences which have been found are essential for long-term use properties of both materials.
|
|
|
Thermoplastic composites for automotive applications
Zbončák, Marek ; Pospíšil,, Ladislav (referee) ; Jančář, Josef (advisor)
Diplomová práca sa zaoberá prípravou teromplastických kompzoitov s PMMA a PC matricou s potenciálnym využitím v automobilovom priemysle. Ako výstuž boli použité krátke sklenené, uhlíkové a PBO (poly(p-fenylén benzobisoxazol)) vlákna známe pod obchodným názvom Zylon®. Práve do PBO vlákien boli vkladané veľké nádeje vzhľadom na ich ohromujúce mechanické vlastnosti. Vplyv objemového zlomku vlákien na modulu pružnosti, pevnosť a ťažnosť kompozitov bol skúmaný. Experimentálne zistený modul pružností bol porovnaný so semi-empirickým Halpin-Tsai modelom. Prídavok sklenených a uhlíkových vlákien viedol k značnému zvýšeniu modulu pružnosti. Ukázalo sa, že po istej hodnote objemového zlomku dochádza k poklesu pevností kompozitov v dôsledku zvyšujúceho sa počtu defektov. Prídavok PBO vlákien preukázal len nepatrný vystužujúci efekt. Viskoelastické vlastností kompozitov boli skúmané pomocou dynamicko mechanickej analýzy (DMA). Termogravimetrická analýza (TGA), konfokálna laserová rastrovacia mikroskopia (CLSM) a rastrovacia elektrónová mikroskopia (SEM) boli využité k štúdiu štruktúry kompozitov.
|
guest ::
