|
|
Spray-coated working electrodes of electrochemical sensors
Lechner, Filip ; Majzlíková, Petra (referee) ; Prášek, Jan (advisor)
This thesis is about the selection of the better type of thick film working electrode for the detection of substances in aqueous solutions, modified by spray coated carbon nanotubes. The theoretical part of this thesis describes the technology of thick film, properties and production of carbon nanotubes, introduction to electrochemistry and electroanalytical methods for the detection of substances in aqueous solutions. The practical part is aimed to realization of the working electrodes by thick film technology and their modification by spray-coated layer consist of carbon nanotubes. Electrodes are characterized using voltammetric methods, electrochemical impedance spectroscopy and electron microscopy. In conclusions is selected the most suitable type of working electrodes for reproducible electrochemical analysis.
|
|
|
Experimental Investigation of Integrated Thick Films
Čejka, Marek ; Jankovský, Jaroslav (referee) ; Szendiuch, Ivan (advisor)
This bachelor thesis deals with the theory of thick film technology. It describes implementation of thick layer integrated circuits, thick film technology, creen printing method. It includes basic electrical properties of thick layers. The aim of this work is the experimental work deals with the detection of current rating of conductors. The work includes the design of method of measuring and test structure.
|
|
|
The influence of a pre-print thick layer paste viscosity on forming of layer
Ondráček, Michal ; Švecová, Olga (referee) ; Klíma, Martin (advisor)
This bachelor thesis deals with the theory of thick film technology and applying these layers. The work also includes basics of liquid rheology, methods of measurement viscosity and ways of mixing liquids. The main aim is to determine the influence of viscosity of thick film pastes for printing quality of the test structure using screen printing, in particular its flatness and sharpness. The aim is also measure the dependence of viscosity thick film pastes on mixing time.
|
|
|
Electrical properties of thick film pastes measured in a wide temperature range
Gajdoš, Jiří ; Jankovský, Jaroslav (referee) ; Řezníček, Michal (advisor)
The aim of this master’s thesis is to investigate the electrical properties of various thick-film resistor pastes in a wider temperature range. The thesis mainly focuses on a change in electrical resistance depending on temperatures, which extend to the cryogenic region. To achieve this, there is an overview of the thick-film technology properties, major technological procedures, principles of resistive pastes conductivity, methods of electrical resistance measuring, possible errors in measurement and methods of their minimization. The content of this work is also familiar with the characteristics of a cryogenic station, on this foundation was proposed the measurement procedure and created thick-film circuits for this station. After measurement in the interval 10 K to 350 K, there are subsequently evaluated the data and explains the principles of the conductivity of used pastes.
|
|
|
Conductive net designing for thick film circuits
Strejček, Jindřich ; Řezníček, Michal (referee) ; Jankovský, Jaroslav (advisor)
Bachelor’s thesis was intent on determination the current rating thick film circuits. Describes an intelligent current source with voltage measurement function and its control. Contains a description of testing to test the test structure and processing of its results. From the evidence in trial testing was formed a new test structure, which was used for testing the current rating thic film conductors. Also copper conductors testing was performed. From measured values were drawed the graphs which represents current rating coductors in depend on width and temperature change of conductor.
|
|
|
Realization of hybrid integrated circuits leads for high-temperature applications
Valíček, Jan ; Jankovský, Jaroslav (referee) ; Řezníček, Michal (advisor)
Bachelor thesis deals with realization possibilities of hybrid integrated circuit terminals for high temperature applications. It describes the realization method of direct mounting of terminals, this method of fixation using the conductive paste for the thick film technology. It also describes the selection of suitable materials and the temperature profile in the reflow and muffle furnace and follow removal of terminal oxides. Furthermore, a method for testing of terminals thermal resistance was realized. In conclusion, the method shows increased mechanical strength with the using of dielectric paste.
|
|
|
Monitoring the impact of ultrasonic energy to the leveling of thick film pastes
Pokluda, Tomáš ; Buršík, Martin (referee) ; Řezníček, Michal (advisor)
This bachelor thesis is focused on the problem of levelling of a profile by ultrasound after printing thick layer pastes and on electrical resistance and geometrical dimensions changes. It describes a creation of hybrid integrated circuits, thick film technology and the screen printing method. It also includes basics of fluid physics, basics of fluid rheology, and description of principles of the used ultrasound transducer. Records of the levelling measurements are presented through the use of photographs, comments, tables and graphs.
|
|
|
Conductive net designing for thick film circuits
Strejček, Jindřich ; Řezníček, Michal (referee) ; Jankovský, Jaroslav (advisor)
Bachelor’s thesis was intent on determination the current rating thick film circuits. Describes an intelligent current source with voltage measurement function and its control. Contains a description of testing to test the test structure and processing of its results. From the evidence in trial testing was formed a new test structure, which was used for testing the current rating thic film conductors. Also copper conductors testing was performed. From measured values were drawed the graphs which represents current rating coductors in depend on width and temperature change of conductor.
|
|
|
Resinate pastes
Tomašák, Lukáš ; Jankovský, Jaroslav (referee) ; Řezníček, Michal (advisor)
The work is dedicated to the production of a thick film with resinate paste on a ceramic substrate based on a proposal test motive. It introduced the optimization of the workflow leading to the successful realization of the layer. Using an electron microscope, it is performed evaluation of the quality of resultant layer and analysis of the composition of the paste. In the last part of the work it is carried out measurements of temperature and electrical properties of resinate paste.
|
|
|
The direct writing of thick film pastes
Ištvánek, Jan ; Řezníček, Michal (referee) ; Buršík, Martin (advisor)
This work deals with the problem of the thick-film pastes and their printing. In the main chapter of this work, the realization of a workplace for thick-film pastes' printing is described. The construction of the realized plotter and the controlling electronics of the plotter is depicted in detail.In the following chapter, the console, through which the plotter is controlled via PC, and the CAD program, which serves for projecting of the motives printed, are described.In the final chapter of this work, the measured profiles of the paste printed for various settings of printing parameters and the photographs of the motives printed are stated.
|
guest ::
