|
|
The Roofing of the Sport Hall
Štelc, Martin ; Sýkora, Karel (referee) ; Buchta, Stanislav (advisor)
This thesis deals with the drafting and assessment of timber structures, the single-roof sports facility to span 40 meters for the Brno locality. Hall dimensions are 40 x 52.5 m. A height of the hall is 16 m sports hall is designed for most sports played indoors. The supporting part of the roof is designed as an arch structure made of glued laminated wood. The structure is made up of cross-linking - triple joint arches distance of 3.5 m. Arches are connected by purlins. Stability is ensured by placing four fields bracing.
|
|
|
Multipurpose barnbuilding
Janírek, Karel ; Bukovská, Pavla (referee) ; Barnat, Jan (advisor)
The content of the bachelor thesis is a proposal and evaluation of the timber construction of multipurpose barnbuilding. It is used for breeding and presentation of animals, especially horses. The building is situated outside the urban area near the Jeseník municipality. Plan dimensions of the hall are 25,0 x 44,0 m. Height is 12,5 m. It is a curved construction of glued laminated timber. The hall is made of 12 cross – binding – triple joint arches in the shape of circle. Individual cross – binding are distanced 4,0 m. The stability of the whole construction is toughened by 3 areas of bracing. Plan dimensions of the stable are 7,0 x 64,0 m. Height is 4,515 m. Construction of the stable consist set of 17 frames of glued laminated timber, distanced 4,0 m. The stability of the whole construction is toughened by 2 areas of bracing. The calculations were made in compliance with the Czech technical norms ČSN EN.
|
|
|
Furniture shop
Richtrová, Pavla ; Bukovská, Pavla (referee) ; Barnat, Jan (advisor)
The aim of this bachelor thesis was to design and assessment of the key elements of the supporting structure of the furniture store. Glued laminated timber of GL24h class was designed as the main material of the supporting elements. The construction is symmetry square layout 30x30 m. The roof structure has the shape of a pyramid with a slope of 15°. The top of construction consist of the corner rafters installed on the corner columns. The main reinforcing elements are columns and rungs, which form stiff knee and ensure the stability. Roof cladding is considered of the panels of insulating glass for the upper half and metal tiles for the bottom half of construction for the calculation. External cladding is designed of sandwich walls. Detailed composition roof and external cladding were not resolved within the work. Bachelor thesis consists of a static calculation in which the individual cross sections and their joints including anchoring are assessed, technical report and drawings.
|
|
|
Multi-function sports hall
Drexler, Martin ; Doc.Ing. Bohumil Straka,CSc. (referee) ; Sýkora, Karel (advisor)
This thesis deals with the design of the construction of multi-funcion sports hall. Hall ground plan dimensions are 36 x 48 m. Height of the hall is 18 m. Sports hall is designed for common sports as handball, football, tennis, volleyball, basketball etc. Construction is designed in the Šumperk locality. It is a curved construction of glued laminated timber. The hall is made of cross- binding - triple joint arches in the shape of circle. Individual cross-binding are distanced 4 m. Arcs are connected by purlins. The stability of the whole construction is toughened by four areas.
|
|
|
Multipurpose Sport Hall
Rusoňová, Nikola ; Hron, Lukáš (referee) ; Buchta, Stanislav (advisor)
Subject of this thesis is to design and evaluate the multipurpose sports hall for a permanent,climate and traffic load. Light range of construction is 42,900 m, clear height at its highest point is 10,824 m. The construction is located in Brno. The main load-bearing elements of constructionare two-juncture arcs of constant cross-section of glued laminated timber class GL24h, axially remote 3,000 m. Trusses are transversely connected by purlins from solid wood for strengthclass C20 axially remote 1,100 m. The entire construction is braced by four transverse bracing,consisting of a rods system.
|
|
|
Structure of The Showroom
Trojanová, Lenka ; Röder, Václav (referee) ; Buchta, Stanislav (advisor)
This thesis describes the design of wooden substructures Motor Show. This constructionis located in South Moravia in Brno area. The dimensions are 33 mx 49 m and height from ground to top is 15.5 m The main structure is unbalanced arc of glued laminated timber, constant section height. Length of the arch is 39 meters. For the design of bearings, connections and contacts have been used steel elements. The concrete columns are stored using the arc tangent bearings. Front and side (east) side have a glass facade, glass is the antisun and security properties are opposite sides of the brickPOROTHERM 40th The structure was modeled in the SCIA ENGINEER 2011th The structural analysis was performed manually.
|
|
|
The roof structure of a multipurpose sport hall in Brno
Grussmann, Jan ; Pilgr,, Milan (referee) ; Šmak, Milan (advisor)
Bachelor´s thesis describes the design and static assessment of the main roof structure supporting elements of the multipurpose sport hall in Brno. It is the emphasis on the optimization of the proposal in terms of material consumption. Curved girders made of glued laminated timber and on the edge connected rafters forms together the cross-link structure. Basis of OSB sheathing carrying the roof deck is secured by the orthogonal grid system purlins and rafters. The static calculation also includes fire resistance reports of single elements.
|
|
|
Sports hall
Návarová, Michaela ; Doc.Ing. Bohumil Straka,CSc. (referee) ; Sýkora, Karel (advisor)
The thesis proposal is developed wooden structure sports hall. The hall is designed for general sports (handball, football, tennis, volleyball, basketball). Plan dimensions of the hall are 26,5 m x 45 m and variable height.The structure is designed for the České Budějovice. Carrier enclosure is designed from the glued laminated wood with axial distance of 3 m Purlins are designed as simple beams with axial distance of 2,5 m and PUR sheathing panels are used. Articulated connection is made with steel pivotal connections.
|
|
|
Studie dřevěné sakrální stavby
Grus, Lukáš
The diploma thesis describes the design of sacred buildings, where wood is the dominant carrier material. Two possible variants are suggested, one of them is selected for further processing and the second one remains only a draft. Attention is given to the design of suitable roofing. The supporting roof structure consists three-articulated beams of glued laminated timber. The theme of the roof is also engaged in research, which focuses on modern wooden churches.
|
|
| |
guest ::
