|
Analysis of the Punching Shear Resistance of Reinforced Recycled Aggregate Concrete Slabs According to Various Standards
Fecko, Tadeáš ; Halvonik, Jaroslav
This paper presents an analysis of the punching shear resistance of reinforced recycled aggregate concrete slabs. This work mentions several papers focusing on recycled aggregate concrete slabs. Punching shear resistance is assessed according to three design approaches based on standards. This article also describes the design of an experimental programme for the testing of reinforced concrete flat slabs from recycled aggregate concrete. A comparison of the results of analytical calculations and experiments shows that the most accurate design code was the second generation of Eurocode 2 and Model code 2010 with an updated failure criterion when the mean values of the ratio Vtest /Vcalc reached 1.15 and 1.14 respectively. On the other hand, the design code followed by Eurocode 2 provided results with higher safety when the Vtest /Vcalc ratio was 1.41
|
|
Explosive Shapes in Smoothed-Particle Hydrodynamics (SPH) Method for Structural Analysis of Concrete Members
Jindra, Daniel ; Hradil, Petr ; Kala, Jiří
The study compares performances of numerical finite element (FEM) analyses of simply supported concrete slabs reinforced by BFRP bars (basalt fibre reinforced polymer) exposed to close-range (1 m distance) explosions. A sensitivity study of slab deflection and reinforcement strain on various shapes of TNT charges is conducted. Smoothed-particle hydrodynamics (SPH) method is used to model the geometry of the TNT charges (variously rotated cylinders, cubes and spheres), detonation and interaction with the concrete slab, which is modelled by Lagrangian mesh. Karagozian and Case (K&C) nonlinear material model is used for concrete slabs exposed to high-velocity impact load. Finite element analyses have been conducted in explicit solvers suitable for high strain rates. The results of numerical simulations are compared with physical experiment data obtained from the scientific literature.
|
| |
|
Familly house in Novém Městě nad Metají
Sháněl, Tomáš ; Burdová, Jana (referee) ; Brukner, Bohuslav (advisor)
The project addresses the low energy new build detached house, which will be permanently used for housing. The building is designed as a two-storey house, which is intended to be permanent residents of 4-5 persons. Roofed building with a flat roof is solved by using a bottom discharge reinforced concrete slabs. Load-bearing walls are from Sendvix manufacturer KM - BETA. The ceilings are designed as monolithic. The building is located in the gap between the existing building houses. The house has a garage for one car.
|
|
Multifunctional object - analysis of substructures of the structure
Pelouch, Adam ; Šulák, Pavel (referee) ; Švaříčková, Ivana (advisor)
This Bachelor thesis deals with design and evaluation local supported ceiling slab made from reinforcement concrete of polyfunctional building. The ceiling slab of the second floor was designing. Internal forces were analysed in RFEM software based on finite entity method with check of usability results by equivalent frame method. Structure was verified according to ultimate and serviceability limit states. Then the comparation of results of direct design method and finite entity method on simple slab 5X5 span.
|
|
Energy efficient building of kindergarte in Soběšice
Růžičková, Eliška ; Wierzbická, Helena (referee) ; Vaščáková, Alena (advisor)
The main goal of the master’s thesis is to design a new building of the nursery in Brno-Soběšice. It is one-storey building. This floor is divided to two same parts. In each of them is day room, sleeping room, office, bathroom, cloakroom for children, cloakroom for teachers with shower and toilet and stock for beds. Also there is director office, toilet, hallway, utility room, room for cleaners, sink and stocks. The vertical loadbearing structures are designed from Porotherm ceramic blocks and the hollow concrete blocks. The building is insulated by a contact thermal insulation system ETICS. The horizontal loadbearing structures and the staircase are designed from reinforced monolithic concrete slab. The roof is flat with extensive greenery. The whole construction are based on foundation passports. The building site contains also an outdoor car park with ten parking spot and garden with climbing frames. The project was performed in Autocad and visualization was performed in ArchiCad and Lumion. All constructions comply with valid standards and regulations. Master’s thesis is divided to three parts. In the first part A it deals with the construction design of a building for a building permission. It contains architectural-building solutions, building physics, situation drawing, reports, building design solutions and fire safety solutions. In the second part B it deals with the design of technical equipment of buildings. It includes the design of sewerage system, water, gas, photovoltaic panels, lighting, ventilation and heating. In the third part C it deals possible systems for the use of rainwater. I described possible systems for the use of rainwater and developed a rough calculation for the selected system.
|
|
Lodging house for cyclists
Jirka, Petr ; Peterka, Tomáš (referee) ; Müller, Jan (advisor)
The subject of this thesis is a design of a newly built guesthouse on a bicycle path in the village Spálené Poříčí. The building is designed in a gently sloping terrain towards the west. The main entrance faces the south. It is an object without a basement and with two above ground floors. The structure of the building is a transverse wall system made of ceramic fittings. Other walls are also made of ceramic fittings. The entire building is based upon the stripe foundations and footings. Pension is covered in the part of the accommodation and in the restaurant part with a gable roof. For the restaurant, a terrace is designed on the west side of the building. In this thesis, static and building equipments are solved. The building is also evaluated in the terms of lighting, thermal, acoustic requirements and the fire safety of building is also solved.
|
|
Static reconstruction of the baroque wine cellar
Kešiar, Szabolcs ; Bažant,, Zdeněk (referee) ; Strnad, Jiří (advisor)
The diploma thesis is focused on the design of structural support and construction modifications of a baroque wine cellar, which is part of a double-storeyed house. The first part deals with the statical analysis and structural support of a masonry barrel vault, which was loaded with a new building. The second part deals with the reconstruction of the double-storeyed object, which is in a state of disrepair with heavily developed cracks. The thesis contains a technical report, analysis of statics, drawing documentation and the work progress. The calculation of internal forces were executed by the software Scia Engineer 2017. The drawing documentation contains a formwork and reinforcement drawing, maping of cracks, leading of tensions in the walls and vault including of floor plans, sections and elevations, production plans of base plates and deviators, reinforcement drawing of concrete bond beam and finally the construction process of upper construction.
|
|
Verification of nonlinear material models of concrete
Král, Petr ; Němec, Ivan (referee) ; Hradil, Petr (advisor)
Diploma thesis is focused on the description of the parameters of nonlinear material models of concrete, which are implemented in a computational system LS-DYNA, interacting with performance of nonlinear test calculations in system LS-DYNA on selected problems, which are formed mainly by simulations of tests of mechanical and physical properties of concrete in uniaxial compressive and tensile on cylinders with applying different boundary conditions and by simulation of bending slab, with subsequent comparison of some results of test calculations with results of the experiment. The thesis includes creation of appropriate geometric models of selected problems, meshing of these geometric models, description of parameters and application of nonlinear material models of concrete on selected problems, application of loads and boundary conditions on selected problems and performance of nonlinear calculations in a computational system LS-DYNA. Evaluation of results is made on the basis of stress-strain diagrams and load-displacement diagrams based on nonlinear calculations taking into account strain rate effects and on the basis of hysteresis curves based on nonlinear calculations in case of application of cyclic loading on selected problems. Verification of nonlinear material models of concrete is made on the basis of comparison of some results of test calculations with results obtained from the experiment.
|
|
Prestressed bridge in Budišov nad Budišovkou
Topinková, Petra ; Zich, Miloš (referee) ; Koláček, Jan (advisor)
This paper proposes main load-bearing structure for simple span concrete bridge across Budišovka river. Length of the construction is 18.8m. Three studies have been proposed and one of those was chosen for further processing. Selected study, prestressed concrete slab, was evaluated for ultimate and serviceability limit state according to recent European standards. Paper also includes visualizations and drawings.
|