National Repository of Grey Literature 27 records found  beginprevious18 - 27  jump to record: Search took 0.02 seconds. 
The influence of temperature and hydration on the long term stability of the buffer material
Švandová, Jana
The influence of temperature and hydration on the long term stability of the buffer material was studied during two experimental studies - "Mock-Up-CZ" experiment and "Long-term stability of engineering barriers" project. The objectives of these studies is to identify mineralogical, chemical and geochemical changes and describe transformation processes in the bentonite materials due to heating and interaction with various saturation media (with different chemical composition) under controlled laboratory and in situ conditions. The Rokle bentonite suitability for its use in the Czech deep repository of high-level radioactive waste was investigated. Mineralogical changes in the bentonites were evaluated by X-ray diffraction. The material of the barrier of the Mock-Up-CZ experiment is a mixture of non­activated Rokle bentonite (85 vol.%), quartz sand (10 vol.%) and graphite (5 vol.%). The barrier has been subjected to thermal stress (up to 90 řC) and synthetic granitic water for 45 months. No sample from 70 analysed samples taken at different depth levels and distances from the source of the heat and/or water showed measurable transformation of original smectites. Newly formed gypsum bordered by illite aureole was detected in the upper part of the experimental set-up (backfill samples), i.e. in the...
The influence of temperature and hydration on the long term stability of the buffer material
Švandová, Jana ; Přikryl, Richard (advisor) ; Galamboš, Michal (referee) ; Havlová, Václava (referee)
The influence of temperature and hydration on the long term stability of the buffer material was studied during two experimental studies - "Mock-Up-CZ" experiment and "Long-term stability of engineering barriers" project. The objectives of these studies is to identify mineralogical, chemical and geochemical changes and describe transformation processes in the bentonite materials due to heating and interaction with various saturation media (with different chemical composition) under controlled laboratory and in situ conditions. The Rokle bentonite suitability for its use in the Czech deep repository of high-level radioactive waste was investigated. Mineralogical changes in the bentonites were evaluated by X-ray diffraction. The material of the barrier of the Mock-Up-CZ experiment is a mixture of non­activated Rokle bentonite (85 vol.%), quartz sand (10 vol.%) and graphite (5 vol.%). The barrier has been subjected to thermal stress (up to 90 řC) and synthetic granitic water for 45 months. No sample from 70 analysed samples taken at different depth levels and distances from the source of the heat and/or water showed measurable transformation of original smectites. Newly formed gypsum bordered by illite aureole was detected in the upper part of the experimental set-up (backfill samples), i.e. in the...
Using of 3D printed patterns for mass production of castings on "green sand" moulding lines
Vašek, Vojtěch ; Lauermann, Jaroslav (referee) ; Horáček, Milan (advisor)
Shortening of the time required to make first product after demand is a crucial factor in every field of industry, not excluding the foundry. To lower this delay, there are rapid prototyping methods. The aim of this thesis is to execute an experiment and then evaluate possibilities of using patterns made by 3D FDM printer on an automatic molding line.
Modern anorganic foundry binder systems
Kolařík, Martin ; Rusín, Karel (referee) ; Cupák, Petr (advisor)
This bachelor thesis deals with newly developed inorganic binder systems. These are mainly developed for their ecological advantages. However, some of the discussed binder systems have better technological properties. Inorganic binder systems are described herein, both on the basis of alkaline silicates and on the basis of inorganic salts. Attention is also paid to bentonite, which is still the most commonly used binder in the world. It turns out that these binder systems will be important for the future of the foundry industry.
The production of unframed foundry moulds with bentonite binder on automatic molding lines
Macko, Martin ; Neudert, Alois (referee) ; Cupák, Petr (advisor)
This thesis aims to describe production of unframed foundry moulds on automatic molding lines with special focus on moulds with bentonite binder, while comparing it to production on framed molding lines.
Manufacture of flaskless foundry moulds
Křížová, Irena ; Rusín, Karel (referee) ; Cupák, Petr (advisor)
Aim of this work is to undertake a literature review of production methods frameless casting molds. Overall evaluation of the advantages and disadvantages compared to shaping using frames.
Binders on the base foundry clays and their properties
Hejl, Matěj ; Cupák, Petr (referee) ; Rusín, Karel (advisor)
The content of bachelor´s thesis is the technical recherche describing clay mineral montmorillonite and qualities of the uniform bentonite´s mixture, which is used for manufacturing forming mixture in the foundry. In the following parts are described another areas of using bentonite, where it has irreplaceable position.
Rehabilitation technology of embankment dams by using suitable types of waste
Michalčíková, Magdaléna ; Kulísek, Karel (referee) ; Drochytka, Rostislav (advisor)
The subject of this work is to find an optimal technology for repairing existing embankment dams with emphasis on simplicity and ecological scalability. Next, secondary energy and waste materials will be evaluated as a partial replacement of a quality montmorillonitic clay. The aim of this will be to maximize the use of these waste materials. In the end a selection of materials for the locality will be made. The use of appropriate types of waste for repairs of embankment dams with clay based grouting compound technology has a great potential, especially with those dams that are not fulfilling their function due to their age.
Marketing v oblasti bentonitových steliv
Juklíček, Zdeněk ; Koudelka, Jan (advisor) ; Vyskočil, Zdeněk (referee)
Teoretická část: marketingové prostředí, kupní rozhodovací proces, segmentace, marketingové strategie, marketingový mix. Praktická část: charakteristika trhu chovatelských potřeb, spotřebitelů, srovnání sortimentu firmy Keramost, a.s. a konkurenčních subjektů, analýza marketingového mixu s důrazem na marketingové aktivity, doporučení a závěr pro management
Marketing v oblasti bentonitových steliv
Juklíček, Zdeněk Bc. ; Koudelka, Jan (advisor) ; Vyskočil, Zdeněk (referee)
Teoretická část: marketingové prostředí, kupní rozhodovací proces, segmentace, marketingové strategie, marketingový mix. Praktická část: charakteristika trhu chovatelských potřeb, spotřebitelů, srovnání sortimentu firmy Keramost, a.s. a konkurenčních subjektů, analýza marketingového mixu s důrazem na marketingové aktivity, doporučení a závěr pro management

National Repository of Grey Literature : 27 records found   beginprevious18 - 27  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.