|
|
Static solution of a typical underground floor of a tall building in Prague
Maršálek, Filip ; Šimůnek, Petr (referee) ; Zich, Miloš (advisor)
This bachelor's thesis deals with the static design of the ceiling structure of a high-rise building. The basis for the bachelor was drawing documentation with basic plan dimensions and heights. The aim of the work is to design a locally and point-supported ceiling slab in the form of a section of one floor, specifically the ceiling above the second underground floor. According to the assigned study, a board model was created in the SCIA Engineer program for the analysis of internal forces, on the basis of which the design of the bending reinforcement of the board was carried out for the limit state of bearing capacity. The design of the shear reinforcement is based on the internal forces from the 2D model and was carried out using the Schöck Bole program with manual verification of selected parts. Furthermore, crack widths were manually calculated and verified via SCIA Engineer. The last calculation was a non-linear deflection calculation in SCIA Engineer. The conclusion of the work was the design of a variant with headers and a comparison of both types of boards. The work includes static calculation and drawing documentation.
|
|
|
Design of the floor slab structure of a tall building
Vintrová, Tereza ; Šimůnek, Petr (referee) ; Zich, Miloš (advisor)
The bachelor thesis deals with the design of the ceiling structure of a high-rise building. The basis for the work was a study of the building with basic floor plan dimensions and heights. The aim of the bachelor thesis is to design a locally supported floor slab with a stiffening core in the middle, as a section of one floor, namely the ceiling above the tenth floor. According to the specified study, a slab model was created in SCIA Engineer to analyze the internal forces based on which the design of the flexural reinforcement of the slab to the ultimate limit state was carried out. The design of the shear reinforcement is based on the internal forces of the 3D model and was done using Schöck Bole with manual verification of the selected column. Non-linear calculation of the 3D model and manual verification of crack widths was used to assess the ultimate limit state. At the end of the work, the design of the circumferential rib variant and the comparison of the two types of slabs was carried out. The work includes a static calculation and drawings.
|
|
|
Apartment building in the gap site
Doupovec, Vojtěch ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
The diploma thesis is focused on design of a monolithic reinforced concrete structure of an apartment building situated in a gap site. The foundation is designed on a foundation slab supported by piles, which together with the walls in the basement are made as a waterproofness concrete structure. It is a two-way wall construction system, made in a combination of masonry and reinforced concrete. The structure was assessed for the ultimate limit state and the serviceability limit state. Due to the requirement for waterproofness, the reinforcement was designed for non-force effects at an early stage. The work includes drawings of shapes and reinforcement.
|
|
|
Static solution of the ceiling structure of apartment building
Habanec, Kamil ; Nečas, Radim (referee) ; Zich, Miloš (advisor)
The Bachelor thesis deals with the static solution of the ceiling construction of an integrated apartment building. The aim is to design, or change the sizes of the projected structures in the submitted project, to ensure the interruption of thermal bridges and protection against foot noise. Subsequently, their static solution, dimensioning and assessment to marginal states. The elements intended for the solution are ceiling structures above the second upper floor, beams, a connecting staircase and a column. The calculation of internal forces was performed in the student version of SCIA Engineer 20.0 with a comparison of values on an independent simplified model. The work also includes drawing documentation for the aforementioned elements. The calculation was carried out according to the applicable standards and principles.
|
|
|
Reinforced concrete foundation tank of office building
Turek, Jan ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
The master’s thesis deals with a design of a reinforced concrete foundation of multi-storey office building. The basement of the building is an underground watertight structure. The design of foundations is a combination of a concrete slab and piles. Internal forces were analysed in RFEM software based on finite element method. The structural assessment of underground construction was performed according to ultimate and serviceability limit states. Due to watertight function of construction, the reinforcement was also designed according to non-force effect in early stage.
|
|
|
Load bearing reinforced concrete structure of apartment house
Ruber, Lukáš ; Krůpa, Pavel (referee) ; Girgle, František (advisor)
The subject of this diploma thesis is the design of the underground parts of the building. Part of this thesis is to comapare alternative designs and subsequentli evaluate the interaction of the upper structure with subsoil and pile fundantion. A detailed static assessment and implementation documentation is then prepared for the selected variant. The design of the base plate and reinforced concrete walls of the underground section are designed with respect to the crack width according to the principles for designing the white box. The theoretical part contains principles for designing and implementing a white box and evaluating design variants.
|
|
|
Court multi-storey outbuilding university space
Maršalová, Jiřina ; Klodner, Jan (referee) ; Perla, Jan (advisor)
The master thesis is focused on design and static calculations of fiber reinforced concrete ground slab. The assessed structure is composed of 6 floors and 2 underground floors. A ground slab is based on piles and designed as a waterproof structure. The structural analysis program RFEM 5.05 has been used for calculation of internal forces.
|
|
|
Design of reinforced concrete structure of administration building
Blažek, Jan ; Girgle, František (referee) ; Šimůnek, Petr (advisor)
The subject of this thesis is the project of the foundational board and of reinforced concrete walls of the underground office building with respect to the limit state of crack width. There is designed the execution of joints of various parts of the construction against infiltration of groundwater into the interior. The drawing documentation of designed parts is performed there. In the theoretical part, there are logged the design principles and implementation of the white tubs.
|
|
|
Monitoring of buildings in relation to surrounding construction activity
Ledvoňová, Monika ; Heřmánková, Věra (referee) ; Cikrle, Petr (advisor)
This thesis deals with the monitoring of buildings disorders caused by surrounding con-struction activity. The first section describes the methods of monitoring failures, from the detailed inspection to the result evaluation, there is also given an overview of measuring instruments. The second part describes the methodology of passports implementation and contains an example of the object repassport that was violated by tunneling. There is a comparison of passport and repassport. The third largest section describes a practical ex-ample of monitoring object cracks around which the building activity took place. There is a documentation of failures, a description of the measuring spots choise, installation of the bases, monitoring, processing of results and conclusion.
|
|
|
Cast-in-place structure at sewerage plant
Hůrka, Jiří ; Šulák, Pavel (referee) ; Strnad, Jiří (advisor)
The thesis is focused on the design and the assessment of horizontal supporting parts and concrete trough on the sewage pumping station in the Boskovice town. There are parts of thesis: technical report, static analysis, design documentation and visualizations. The technical report describes the proposed solution. Calculation of internal forces was performed by manual calculation and verified by the software RFEM. The design documentation consists of shape and reinforcements drawings of selected structural elements.
|
guest ::
