|
|
Biomechanical study of the upper limb wrist
Kouřil, Jan ; Marcián, Petr (referee) ; Florian, Zdeněk (advisor)
This master´s thesis is focused on biomechanical study of wrist. There is a literature search on this theme in the beginning of this work. The thesis is described in detail anatomy of bones in the wrist. Subsequent the stress-strain analysis of physiological wrist is implemented in a neutral position. The model of geometry of wrist is created on base of CT data. To create calculation model and the solution is implemented in the computer system ANSYS Workbench.
|
|
|
Analysing of the design of the opening mechanism for the floor hatch
Metelka, Jiří ; Houfek, Martin (referee) ; Fuis, Vladimír (advisor)
In a family house not far from Brno, there is an entryway hole for getting into the space under the floor. The hole is covered by a high weight concrete hatch. For easier manipulation with the hatch an opening mechanism was designed and manufactured. This mechanism had been installed under the hatch and nowadays it works well. This master’s thesis deals with description of main components of the mechanism and their function. Load analysis and stress-strain analysis are the major part of this thesis. At the end of this work the analysis results are commented and some suggestions for further research are proposed.
|
|
| |
|
|
Stress-strain analysis of aortic aneurysms
Man, Vojtěch ; Janíček, Přemysl (referee) ; Burša, Jiří (advisor)
This master thesis is focused on stress-strain analysis abdominal aortic aneurysm using ANSYS software. The model of abdominal aortic aneurysm are based on CT scans of five specific patients. The branching arteries are included to the model and one goal of this thesis is decision about their influence of the wall stress. In this thesis was used a hyperelastic materiál model, which is based on mechanical tests done on human arterial samples.
|
|
| |
|
|
Analysis of mechanical behaviour of synchronous generator
Donát, Martin ; Hadaš, Zdeněk (referee) ; Dušek, Daniel (advisor)
This Master’s thesis deals with analysis of mechanical behaviour of the synchronous generator and assessment of the possibility of reducing the mass of the frame of the generator. The aims of this work were: to perform the stress-strain analysis and modal analysis of the required model of the synchronous generator, to assessment influence of single part of the frame of the generator over its stiffness and design construction modification of the frame of the generator, which reduce its mass.
|
|
|
Stress - strain analysis and creep assessment of the thick-walled tubular structures.
Zouhar, Michal ; Petruška, Jindřich (referee) ; Hlavoň, Pavel (advisor)
This thesis deals with the stress-strain analysis of thick-walled pipe parts. The dimension series (characterized by the D/d ratio) of three components are solved, then a direct tube, a torus with constant wall thickness (arcus) and a torus with variable wall thickness (bend). At first, the internal pressure amount, when a fully plastic state for these components is created, is solved. The amount of the limit pressure is determined analytically, numerically and by appropriate normative relations. The results and stress diagrams of individual solutions are mutually compared. Furthermore, these components are solved in the creep and are exposed to the maximum allowable normative internal pressure for 200,000 hours according to the standard – the operating time of components. The place of the maximum equivalent creep strain and the place of the maximum equivalent stress is examined. In these places the principal stresses are depicted depending on the D/d ratio. The results and stress diagrams of individual dimension series are mutually compared. From the available literary sources the condition of the limit state reach is chosen, according to which the evaluation of the limit state reach for individual components is carried out.
|
|
|
Stress-strain analysis of artery with atheroma
Maša, Marek ; Návrat, Tomáš (referee) ; Burša, Jiří (advisor)
The main goal of this diploma thesis was the stress-strain analysis of iliac artery with atheroma.This problem was solved using finite element method (FEM).For the calculation purposes three two-dimensional models were created. The geometry was gained from transversal sections through the iliac artery with ateroma. This geometry is educed from used literature review. The main calculation process was run by ANSYS 11.0 program system.
|
|
|
Stress - strain analysis of save premolar tooth
Sáblíková, Zdeňka ; Fuis, Vladimír (referee) ; Florian, Zdeněk (advisor)
This diploma thesis deals with stress-strain analysis of healthy and save tooth. Defor-mation and stress of tooth system with a part of jawbone was solved by calculating method, FEM in computing system ANSYS Workbench 11. Stress-strain analysis of save of tooth was performed in twenty-five ways describing various classes and sizes of cavity, filling material and model of connection between the filling and the tooth.
|
|
|
Stress - strain analysis of jaw with decrease bone tissue
Krpalek, David ; Fuis, Vladimír (referee) ; Florian, Zdeněk (advisor)
This diploma thesis deals with stress - strain analysis of jaw with decrease of bone tis-sue. At first was created a model of geometry using graphic program Rhinoceros 4.0 upon acquisition by the 3D scanner. That was converted to the computational system ANSYS Workbench 11 which uses for solving the finite element method (FEM). Solving was executed with homogenous, linear and isotropic material model of bone with different characteristics for compact and cancellous bone. Forces of the three working muscles, which participate on chewing, were given on the basis of the force and moment balance mandible. Solving was executed for 12 variant simulating occlusion in places, where was earlier found teeth.
|
guest ::
