|
| |
|
|
Analysis of mechanical behaviour of synchronous generator
Donát, Martin ; Hadaš, Zdeněk (referee) ; Dušek, Daniel (advisor)
This Master’s thesis deals with analysis of mechanical behaviour of the synchronous generator and assessment of the possibility of reducing the mass of the frame of the generator. The aims of this work were: to perform the stress-strain analysis and modal analysis of the required model of the synchronous generator, to assessment influence of single part of the frame of the generator over its stiffness and design construction modification of the frame of the generator, which reduce its mass.
|
|
|
Stress - strain analysis and creep assessment of the thick-walled tubular structures.
Zouhar, Michal ; Petruška, Jindřich (referee) ; Hlavoň, Pavel (advisor)
This thesis deals with the stress-strain analysis of thick-walled pipe parts. The dimension series (characterized by the D/d ratio) of three components are solved, then a direct tube, a torus with constant wall thickness (arcus) and a torus with variable wall thickness (bend). At first, the internal pressure amount, when a fully plastic state for these components is created, is solved. The amount of the limit pressure is determined analytically, numerically and by appropriate normative relations. The results and stress diagrams of individual solutions are mutually compared. Furthermore, these components are solved in the creep and are exposed to the maximum allowable normative internal pressure for 200,000 hours according to the standard – the operating time of components. The place of the maximum equivalent creep strain and the place of the maximum equivalent stress is examined. In these places the principal stresses are depicted depending on the D/d ratio. The results and stress diagrams of individual dimension series are mutually compared. From the available literary sources the condition of the limit state reach is chosen, according to which the evaluation of the limit state reach for individual components is carried out.
|
|
|
Stress-strain analysis of artery with atheroma
Maša, Marek ; Návrat, Tomáš (referee) ; Burša, Jiří (advisor)
The main goal of this diploma thesis was the stress-strain analysis of iliac artery with atheroma.This problem was solved using finite element method (FEM).For the calculation purposes three two-dimensional models were created. The geometry was gained from transversal sections through the iliac artery with ateroma. This geometry is educed from used literature review. The main calculation process was run by ANSYS 11.0 program system.
|
|
|
Stress - strain analysis of save premolar tooth
Sáblíková, Zdeňka ; Fuis, Vladimír (referee) ; Florian, Zdeněk (advisor)
This diploma thesis deals with stress-strain analysis of healthy and save tooth. Defor-mation and stress of tooth system with a part of jawbone was solved by calculating method, FEM in computing system ANSYS Workbench 11. Stress-strain analysis of save of tooth was performed in twenty-five ways describing various classes and sizes of cavity, filling material and model of connection between the filling and the tooth.
|
|
|
Stress - strain analysis of jaw with decrease bone tissue
Krpalek, David ; Fuis, Vladimír (referee) ; Florian, Zdeněk (advisor)
This diploma thesis deals with stress - strain analysis of jaw with decrease of bone tis-sue. At first was created a model of geometry using graphic program Rhinoceros 4.0 upon acquisition by the 3D scanner. That was converted to the computational system ANSYS Workbench 11 which uses for solving the finite element method (FEM). Solving was executed with homogenous, linear and isotropic material model of bone with different characteristics for compact and cancellous bone. Forces of the three working muscles, which participate on chewing, were given on the basis of the force and moment balance mandible. Solving was executed for 12 variant simulating occlusion in places, where was earlier found teeth.
|
|
|
Stress-strain analysis of winepress frame
Vaculka, Miroslav ; Fedorova, Svitlana (referee) ; Novák, Kamil (advisor)
This bachelor’s thesis deals with stress-strain analysis of winepress frame. The press is made of self help. No analysis has been performed for it yet. The thesis contains its detailed research, then basic research about other winepresses and research in the Mechanics of Materials. A computational model was set and stress-strain analysis was done in an analytical approach and numerical approach using the program ANSYS. Everything was evaluated in the discussion of the results, including the achievement of the safety factor to limit the state of elasticity. A system approach was used in the entire bachelor’s thesis.
|
|
|
Stress-strain analysis of skull implant
Hřičiště, Michal ; Borák, Libor (referee) ; Marcián, Petr (advisor)
Lebeční implantáty se používají jako náhrady částí lebečních kosti, které v důsledku zranění nebo nemoci ztratili svou funkci. Důležitým faktorem, který ovlivňuje funkci celé soustavy implantátu, jsou jeho mechanické projevy. Tato práce stručně shrnuje současné znalosti v oblasti rekonstrukce lebečních defektů a popisuje srovnání různých tvarů stěn implantátu vytvořených z různých materiálů, na základě deformační napěťové analýzy modelu neurocrania s umístěným implantátem, zatíženým nitrolebečním tlakem a vnějším zatížením.
|
|
|
Stress-strain analysis of axisymmetric body solved by analytical and numerical approaches
Mívalt, Tomáš ; Petruška, Jindřich (referee) ; Novák, Kamil (advisor)
The bachelor’s thesis deals with stress-strain analysis of axisymmetric body. As suitable axisymmetric body was chosen combustion engine piston. Thesis includes study of piston loads and possibilities of stress-strain calculations. This is followed by research in field of historical approaches of stress-strain calculations and tension evaluating and classification. In the practical part of thesis, analytical solution was solved with different computational models – fixed plate, supported plate and composite body – composed of shell and plate. After solving analytical models, numerical approach took place; FEM with different resolutions was used in ANSYS system. In conclusion of the thesis, all data and result were compared and appropriate conclusions were made.
|
|
|
Stress-strain analysis of the solids with highly curved centerline
Peter, Ondřej ; Man, Vojtěch (referee) ; Novák, Kamil (advisor)
The bachelor thesis deals with stress-strain analysis of the solid with highly curved centerline. The thesis is divided into three main parts: background research, computation modelling and performing of the experiment. All analytical equations and practical examples were summarized in the first part of this thesis. In second part, computation model is solved by using analytical and numerical approach. Next, the analytical and numerical approaches are compared to each other. Third part deals with experiment.
|
guest ::
