|
|
Preparation of Epoxy Based Insulating Materials Filled by Nanoparticles
Mockovčiak, Kristian ; Čech, Ondřej (referee) ; Chladil, Ladislav (advisor)
The present thesis deals with the preparation of epoxy insulating materials filled with nanoparticles and its electrical properties. Experimental samples are made of epoxy resin as a matrix and titanium dioxide nanoparticles (TiO2) as nanofillers in 0.5, 1 and 3 percent filling. Temperature dependencies of internal resistivity, relative permittivity and loss factor are measured on nanocomposite samples. The influence of the filler on the resulting electrical properties of the polymer used is discussed.
|
|
|
Study of alternative electroinsulating liquids properties
Bannert, Tomáš ; Hylský, Josef (referee) ; Frk, Martin (advisor)
This bachelor´s thesis is dealing with the study of alternative electrical insulating properties of the materials used in the electronics industry, particularly liquids based on natural esters and especially their constituents in the form of higher fatty acids and esters. The work is divided into theoretical and practical part. The theoretical part deals with the characterization of vegetable oils, their constituents and mineral oils, their comparison in terms of electrical and non-electrical properties and current state of the use of vegetable oils and their constituents in the electronics industry. Further it’s dealing with analysis of diagnostic methods for these characteristics. In the experimental part were analyzed electrical and non-electrical properties of selected samples of vegetable oils, their constituents and mineral oils such as the density, the dynamic viscosity and the complex permittivity and its parts as relative permittivity and loss number. Evaluations of the results of each group are compared with each other.
|
|
|
Degradation of nanocomposites
Polách, Ondřej ; Rozsívalová, Zdenka (referee) ; Polsterová, Helena (advisor)
The present work deals with the electrical properties of nanocomposite materials. Samples for the practical part consisting of epoxy resin as matrix and SiO2 as nanofillers and were made in four different percentage performance. There is investigated the influence of thermal degradation of nanocomposite materials change resistivity, loss factor and relative permitivity.
|
|
|
Study of electric properties of nanocomposit material
Ovsík, Jiří ; Rozsívalová, Zdenka (referee) ; Polsterová, Helena (advisor)
This work deals with the electrical properties of nanocomposite materials. Samples for the experiment are made of epoxy resin as matrix and titanium dioxide TiO2 as nanofillers in varying percentage performance. Measurements are temperature dependent components of the permittivity, dissipation factor and resistivity. Furthermore, the internal resistivity is observed with regard to the percentage performance of a sample of nanoparticles.
|
|
|
Study of electric properties of nanocomposites
Libra, Miroslav ; Rozsívalová, Zdenka (referee) ; Polsterová, Helena (advisor)
The present master´s thesis deals with the electrical properties of nanocomposite materials. Samples for the experiment are made epoxi resin and oxides TiO2 and Al2O3 as nanofillers in different percent performace. The samples nanocomposites are measured temperature dependence of the resistivity inside, dissipation factor and relative permittivity. It discusses the effect of the filler on the resulting electrical properties of the polymer.
|
|
|
Study of electrical properties of nanocomposites
Ovsík, Jiří ; Rozsívalová, Zdenka (referee) ; Polsterová, Helena (advisor)
The present work deals with the electrical properties of nanocomposite materials. Samples for the experiment are made of epoxy resin as a matrix and oxides TiO2, Al2O3, WO3, SiO2 as nanofillers in 0.5 and 1 percent performance. The experimental samples are measured in temperature and frequency dependence of relative permittivity, dissipation factor, rezistivity and are broken down by the influence of filler on the electrical properties of the polymer. Attention is also paid to the mechanical properties of nanocomposites.
|
|
|
Mica modified electroinsulating varnishes
Mrkos, Pavel ; Frk, Martin (referee) ; Rozsívalová, Zdenka (advisor)
This master´s thesis deals with influence of mica content on the electrical properties of electrical insulating varnishes, particularly in the polyester resin Dolphon XL 2102. It focuses on diagnostic methods and testing the properties of electroinsulating varnishes. Examines the potential benefits of micronised mica in order to achieve better electrical insulation properties of the system compared to the matrix. The composite material consists of polyester resin Dolphon XL 2102, which is modified different mass percentage of micronized mica. The results of this project are frequency dependencies of real and imaginary parts of complex permitivity of varnish component.
|
|
|
Measurement uncertainty in diagnostics of insulating materials
Kamenická, Zuzana ; Rozsívalová, Zdenka (referee) ; Frk, Martin (advisor)
This work deals with measurement capacity and dissipation factor of capacitor with real dielectric in frequency range 20 Hz to 30 MHz. Liquid and solid dielectrics are measured by LCR instruments and by test fixtures, both from company Agilent. Relative permittivity and loss number are calculated for different instruments settings. The general aim is to specify the influence of parameters as frequency, voltage, integration time and thickness of material on the uncertainties of primary and secondary quantities for measurement.
|
|
|
Multistress ageing analysis of the electroinsulating materials
Jeřábek, Michal ; Frk, Martin (referee) ; Rozsívalová, Zdenka (advisor)
This diploma thesis deals with not-aged and thermally, electric and multistress aged slotted isolations dielectric properities experimental probing. Dutiny experiment is watched influence moisture on dielectric properties insulating materiále ISONOMŽNMN. Especially both two permitivity complex components are surveyed, in dependence on the frequency and the temperature changes during thermal, electric and multistress ageing. These characteristics are viewed in light of application the isolation in practice.
|
|
|
Piezoceramics Measurements
Fialka, Jiří ; Fidler, Petr (referee) ; Beneš, Petr (advisor)
The master’s thesis deals with the piezoelectric coefficients, the resonance frequency and especially the piezoelectric constants verification. With the assistance of several devices, for instance LCR-meter HIOKI 3532, impedance analyzer Agilent 4294A and LCR-meter Agilent E4980A, the resonance and the anti-resonance frequencies as well as impedance and capacitance of samples are measured. The paper opens with the theory of the piezoelectric phenomenon and the difference between direct and indirect piezoelectric phenomenon, it also describes the basic behaviour of a piezoelectric ceramic element during mechanical straining or applied voltage. Further, the paper concerns the description of various piezoelectric constants and their calculations. Subsequent part of the paper is devoted to the temperature dependence of the main piezoelectric parameters of PZT ceramics. The materials coefficients are delineated as a function of temperature of the piezoelectric charge coefficients dij, relative permittivity r, electromechanical coupling factor kij and frequency constants Ni. One of the chapters also determines the piezoelectric charge constant d33 of PZT ceramics by laser interferometer and compares it with the value measured by resonance methods. The surface displacement was measured by a single-beam interferometer Polytec OFV-5000. The results of measurements of piezoelectric charge coefficients d33 acquired by the first and the second method are identical. The last section of the paper is focused on different methods of experimental studies on the characteristics of heat transfer by diffusing heat through conduction between the silver-plated surface of cylinder made of PZT ceramics. The effect on the resonance and the anti-resonance frequencies is monitored. There after, the real heat, determined by thermo camera and the physical model of heat transfer created in program COMSOL Multiphysics, is analysed.
|
guest ::
