|
|
Technological stage of the gross superstructure of the apartment house in Prague - Dablice
Kucsera, Adam ; Kopecký, Lukáš (referee) ; Šlanhof, Jiří (advisor)
The work adresses the technological stage of the gross superstructure of the apartment house in Prague – Dablice. The house consist of reinforced concrete structure on the ground floor, three other floors in a brick form of pramic blocks Porotherm, ceilings above the second and third floor are composed of Spiroll prefabricated ceiling panel and roof structure is made up of gang nail trusses, thanks to this composition of house, it was necessary to address how to storage materials on the site, and also the arrival, departure and parking of vehicles. Technological regulativ is focused on concreting of the reinforced concrete monolithic framework.
|
|
|
Diagnostics of steel fiber reinforced concrete industrial floors
Kuře, Václav ; Láník, Jaromír (referee) ; Schmid, Pavel (advisor)
This final thesis is divided into two parts. The first, theoretic part is focused on issue about industrial concrete floors, their production and adjustment. Special attention is paid to the mineral shakes, steel fibres and concrete, which is used to these constructions. There are more information about specific standardized tests of steel fibre concrete and some damages of concrete floors in other chapters. Second part of the diploma thesis is practical. Theoretical knowledge are applied to the actual construction. Survey methodology and diagnostic work are also desribed. Data processing and evaluation with the commentary is also attached to this part. The conclusion summarizes the results and selected findings relating to the issue are also included there.
|
|
|
Study of rheological properties of concrete with the addition of low-temperature plasma treated polymer fibers
Gromeš, Vít ; Herka, Petr (referee) ; Bodnárová, Lenka (advisor)
Polypropylene fibers are used in concrete mixtures to avoid early cracks during shrinkage. Low thickness of each fiber and low density are reasons, why these fibers are effective in small dosage. Their disadvantages are smooth surface and hydrophobic character of polypropylene, thus it is necessary to improve their surface for better spread during mixing and to reach needed adhesion between fibers and cement paste. In present time are using chemical solutions applied on surface of the fibers to provide better water absorption, but the trend is reducing of using chemicals in industry and this situation demands new technology. There is possible solution, polypropylene fibers treated by low-temperature plasma. This method was developer by cooperation Masaryk University in Brno with company KrampeHarex and Brno Universiry of Technology. The goal of this thesis is to bring comparison, of influence on rheology properties of fresh concrete, between admixed the fibers with applied chemical layer and low-temperature plasma treated polypropylene fibers.
|
|
|
Change in the durability of concrete made of recycled concrete by alternative addition of ceramic admixtures
Stavař, Tomáš ; Hoffmann, Oldřich (referee) ; Stehlík, Michal (advisor)
The master thesis dealing with problematic about durability of concrete, with use of recycled concrete and addition of silica additions. Predominant for resistance of concrete constructions is surface layer, through which aggressive gasses and liquids penetrate from surrounding environment. The most important indicator of concrete durability is ability of surface layer transmissions of aggressive substants. In experimental part will be defined the actual state of surface layer by normal testing methods. The transmissions of surface layer will be tested on concrete cubes. Tests for transmissions of air (method TORRENT), of water (method ISAT), of acid gases (dept of carbonation by quick test in 98% CO2) will be carried out and also strength tests. Assessment of positive or negative influence of additions and amount of cement on durability and mechanical properties of concrete will be discussed in conclusion.
|
|
|
Properties of concrete with the addition of plasma modified polypropylene fibers
Vorel, Pavel ; Herka, Petr (referee) ; Bodnárová, Lenka (advisor)
Master‘s thesis focuses on concrete combined with polypropylen fibres produced commercially, fibres without surface modifications and fibres modificated by plasma. Most important topic of the thesis is experimental verification of influence of plasma modificated fibres on attributes of fresh concrete and physical-mechanical attributes of solidified concrete. Based on the results of the tests perfomed on examin units compares results and anylyses applicability of different fibre surface modifications.
|
|
|
Construction Technology Study of multifunctional building construction
Kapusníková, Pavla ; Fila, Lukáš (referee) ; Diaz, Yvetta (advisor)
The bachelor thesis deals with construction and technology studies multifunctional building construction site. The house is located in Prerov. The building has six floors, the first floor there are shops in other floors are apartments. The supporting structure of the building is a reinforced concrete skeleton with slabs. Slabs are mounted on reinforced concrete columns and walls. Outer and inner walls are made of brick blocks Porotherm. The building has a steel timber truss. A roof is covered with roofing Tondach. In this thesis I address the study of rough construction and technological regulation is aimed at the monolithic frame.
|
|
|
Influence of dosage of steel fibres on the loss of consistency of fresh concrete and compresive strength of hardened concrete.
Kuře, Václav ; Źalud, Oldřich (referee) ; Vymazal, Tomáš (advisor)
Bachelor work is focused on problems of a consistency of fresh fiber reinforced concrete. The consistency was characterized by a slump test and by a test of spilling how is it described in ČSN EN 12350. Obtained results are compared with a reference sample of a fresh concrete and between themselves. Further the work is focused on volumetric changes during maturation which are integral part of physical properties of the concrete. Influence of a dispersed reinforcement was monitored on the cube strength in plain pressure of individual mixed sample too. Total evaluation of tested parameters is states at the end of the work including comment about possible ways of interference of tests.
|
|
| |
|
|
Cement composite materials with polypropylene fibers
Preisner, Martin ; Hela, Rudolf (referee) ; Bodnárová, Lenka (advisor)
This thesis deals with summarizing the possible effects of the addition of polypropylene fibers, especially low temperature plasma treated on the properties of cement composites and concrete. They are given basic information and distribution of polypropylene fibers. It describes the finish polypropylene fiber low-temperature plasma. The experimental part focuses on the effect of dispersion of polypropylene fibers treated plasma in the cement matrix.
|
|
|
Properties of cementitious composites with plasma treated polymer fibers
Počekajlo, Václav ; Hela, Rudolf (referee) ; Bodnárová, Lenka (advisor)
Modification of polymer fiber low temperature plasma is one of the ways to enhance the properties of modified fibers as follows. This work aims to evaluate the effect of plasma treated polypropylene fibers on the rheological properties of cement composites. The theoretical part describes the treatment and the effect of plasma treatment on polymer fibers. The influence of polypropylene fibers treated by low-temperature plasma on the workability of concrete. The practical part is described and evaluated experimental verification of the influence of the addition of commercially available fibers and fibers treated plasma on the rheological properties of fresh cement composite.
|
guest ::
