|
|
Rationalization of production of digital receiver
Polák, Martin ; Maruška, Josef (referee) ; Špinka, Jiří (advisor)
This diploma thesis deals with topics related to optimalization and increases quality production in the electronics industry. Project purpose was to analyze process production manufacturing digital receiver in specific situation applied upon multinational company. Main part mine work was build-up FMEA analysis and creation control plan production line. For optimize production flow was application method lean production and for department material supply method KANBAN. This diploma thesis has been written within cooperation of Celestica Ráječko company where I have picked up data and knowledge to above-mentioned topic.
|
|
|
SMED Analysis of production line and improvement proposals in order to decrease changeover times
Šrom, Jan ; Polzer, Aleš (referee) ; Píška, Miroslav (advisor)
Bachelor thesis deals with the analysis of production line and improvement proposals in order to decrease changeover times. To realize this task was chosen SMED (Single Minute Exchange of Dies) method. SMED is one of the many lean production methods for reducing waste in a manufacturing process. It provides a rapid and efficient way of converting a manufacturing process from running the current product to running the next product. This rapid changeover is key to reducing production lot sizes and thereby improving flow.
|
|
|
Principles of lean manufacturing and its implementation in the CNC workplace
Khol, Lubomír ; Kukumberg, Ladislav (referee) ; Simeonov, Simeon (advisor)
Bachelor thesis is focused on analyzing the current production status of a specific hose clamps in the company NORMA Czech s.r.o. Hustopeče. The subsequent analysis of the status of the particular manufacturing sector has been proposed alternative solutions to the manufacturing process in order to increase production efficiency. The aim of this work is theoretical treatment of the issue in terms of production capabilities in order to reduce production times and costs for the production of clamps.
|
|
| |
|
|
Analysis of the processes of the company HALDY-PLUS, spol. s r.o.
Sopko, Michal ; Kislingerová, Eva (advisor) ; Kotáb, Jiří (referee)
Increasing competition in the industry is forcing companies in search of innovative solutions in order to grow into stronger rival. One of the ways how to achieve this is by introducing elements of lean manufacturing. The aim of this dissertation is to analyze the business processes of the company Haldy Plus - Limited. (Ltd), which operates in the paper industry and its main field of activity is the production of packaging from corrugated cardboard. The content of this thesis is getting to know the theoretical basis for lean production, the company description, identifying potential for improvements, analysis of these critical processes, and measures such as the proposal to streamline processes.
|
|
|
The Use of the Lean Production in the Selected Company
BICANOVÁ, Lenka
The tendency of this bachelor thesis is to assess the use of lean production in the selected company. The first part of the thesis is literary review and focuses on the characteristics of lean production, its origin, history, principals and methods. The thesis formed in collaboration with company called Fronius Czech Republic, s. r. o., headquartered in Český Krumlov. The practical part, my own work, consists of characteristics of the selected company, its history, its structure and its production. There is also described, what methods and principals of lean manufacturing Fronius applies and what benefits these methods brought to the company.
|
|
|
Possibilities of implementation the lean production in the choosen company
MALATÍNOVÁ, Lenka
The aim of this thesis work is to evaluate the functioning of the already established elements of lean production, analyze production effectiveness before and after the introduction of these elements in the choosen company. This thesis characterizes the production before the introduction of lean production and shows deficiencies in the production process. These deficiencies have been eliminated implementation of lean production on the line. Subsequently indicators are evaluated before and after the introduction of the lean production. The experiment participants explains the principle of push and pull, one-piece-flow or customer tact.An integral part of the implementation of lean manufacturing was 5S method. It was proposed posible improvements for enterprise . It was recommended to conduct thorough supplier evaluation and subsequent communication with them. Other recommendations focused on Kaizen management, which is a system for proposals to improve employees.
|
|
|
Using levelling production in the company Robert Bosch České Budějovice s.r.o.
DAŇKOVÁ, Lucie
The main goal of this work was to evaluate the application of levelling production on one defined production line at the company Robert Bosch České Budějovice s.r.o. The analysis was focused on the preparation of the production plan, the ability to follow a plan and to identify the main factors affecting the smooth running of production. The theoretical part dealed with the characteristics of production, then showcased elements of lean manufacturing and in the last part of the literature overview is describing the leveled planning process in detail. In the first part of the practical part were introduced lean manufacturing enterprise established in RBCB and line CR1 and the second half of practical part is focused on technology planning equalized analysis of the manufacturing production lines and the ability to follow a plan. After the detection of 4 most common deviations, were proposed solutions for improvements.
|
|
|
Organization, Management and Distribution in Samson brewery
VÁLEK, Petr
The diploma thesis presents the analysis of brewery Samson; especially the work contains issues of logistics and warehouse management. The thesis is divided into some parts. Mostly there are the subjects in sphere of purchasing, production, sales, distribution, logistics, and warehouse economy. The main attention of diploma thesis was directed at possibility of store positions enlarging. Above all it is the question of roofed areas which are in absence. As following they are proposed the prospective answers of single defects in warehouse management and possible implementation of lean production. The end of the thesis is dedicated to complete conclusion of possible answers and their effect on warehouse management and the whole company.
|
|
|
The analysis of selected lean manufacturing
LÁNOVÁ, Jana
This thesis is concerned with the analyses of selected methods of lean production. The main aim of the theoretical part is to describe management of production, conception of lean enterprise, what is the lean production, the types of waste and the elements of lean manufacturing as lean workplace, Kanban system, Kaizen and other. The main goal of the practical part of this thesis is to analyse the production system of Erwin Junker Grinding technology a.s. and the mode of production of selected spindle. After the detection of the present state were proposed two possible solutions for improving the production.
|
guest ::
