|
Marketing strategy adaptation of Chipotle in Czech markets
Hofmannová, Veronika ; Král, Petr (advisor) ; Janecký, Vlastimil (referee)
This Diploma thesis deals with chain of fast food restaurants named Chipotle, which is predominantly known in the United States of America, and its potential entry into the Czech market. The thesis analyzes the marketing strategy of the company and applies its adaptation for the Czech market. The competitive advantage of the company is using local organic raw ingredients of high quality; therefore, the thesis examines the Czech people´s interest in Mexican cuisine as well as issues of sustainable development. The aim of the thesis is to analyze the marketing strategy of the chain of restaurants with Mexican fast food and subsequently to apply the adaptation of the marketing mix to the conditions at the Czech market.
|
|
Changes in structure and phase composition in the surface of tram rail
Švábenská, Eva ; Roupcová, Pavla ; Schneeweiss, Oldřich
We have investigated structure and phase composition of surface layer of tram rails after long time running and the results were compared with those obtained on the original part of material. Changes due to effects of severe plastic deformation together with thermal shocks by friction process were expected. The information about structure and phase composition was obtained by optical and scanning electron microscopy, X-Ray Powder Diffraction, Mössbauer Spectroscopy and Glow Discharge Emission Spectroscopy (GDOES) and this was completed by microhardness measurements. The results show that the surface layer in comparison with the original material exhibits important changes in grain structure, an increase in microhardness and high content of iron oxide and hydrooxides. According to the depth profile of the chemical composition measured by GDOES there is an increase in carbon content in the surface layer which can be effect of up-hill diffusion.
|
|
A Comparison of Preconditioning Methods for Saddle Point Problems with an Application to Porous Media Flow Problems
Axelsson, Owe ; Blaheta, Radim ; Hasal, Martin
The paper overviews and compares some block preconditioners for the solution of saddle point systems, especially systems arising from the Brinkman model of porous media flow. The considered preconditioners involve different Schur complements as inverse free Schur complement in HSS (Hermitian - Skew Hermitian Splitting preconditioner), Schur complement to the velocity matrix and finally Schur complement to a regularization block in the augmented matrix preconditioner. The inverses appearing in most of the considered Schur complements are approximated by simple sparse approximation techniques as element-by-element and Frobenius norm minimization approaches. A special interest is devoted to problems involving various Darcy, Stokes and Brinkman flow regions, the efficiency of preconditioners in this case is demonstrated by some numerical experiments.
|
|
STRAIN ENGINEERING OF THE ELECTRONIC STRUCTURE OF 2D MATERIALS
del Corro, Elena ; Peňa-Alvarez, M. ; Morales-García, A. ; Bouša, Milan ; Řáhová, Jaroslava ; Kavan, Ladislav ; Kalbáč, Martin ; Frank, Otakar
The research on graphene has attracted much attention since its first successful preparation in 2004. It possesses many unique properties, such as an extreme stiffness and strength, high electron mobility, ballistic transport even at room temperature, superior thermal conductivity and many others. The affection for graphene was followed swiftly by a keen interest in other two dimensional materials like transition metal dichalcogenides. As has been predicted and in part proven experimentally, the electronic properties of these materials can be modified by various means. The most common ones include covalent or non-covalent chemistry, electrochemical, gate or atomic doping, or quantum confinement. None of these methods has proven universal enough in terms of the devices' characteristics or scalability. However, another approach is known mechanical strain/stress, but experiments in that direction are scarce, in spite of their high promises.\nThe primary challenge consists in the understanding of the mechanical properties of 2D materials and in the ability to quantify the lattice deformation. Several techniques can be then used to apply strain to the specimens and thus to induce changes in their electronic structure. We will review their basic concepts and some of the examples so far documented experimentally and/or theoretically.
|
| |
|
ELECTRON BEAM REMELTING OF PLASMA SPRAYED ALUMINA COATINGS
Matějíček, Jiří ; Veverka, J. ; Čížek, J. ; Kouřil, J.
Plasma sprayed alumina coatings find numerous applications in various fields, where they enhance the properties of the base material. Examples include thermal barriers, wear resistance, electrical insulation, and diffusion and corrosion barriers. A typical structure of plasma sprayed coatings, containing a multitude of voids and imperfectly bonded interfaces, gives them unique properties - particularly low thermal conductivity, high strain tolerance, etc. However, for certain applications such as permeation barriers or wear resistance, these voids may be detrimental.\nThis paper reports on the first experiments with remelting of plasma sprayed alumina coatings by electron beam technology, with the purpose of densifying the coatings and thereby eliminating the voids. Throughout the study, several parameters of the e-beam device were varied - beam current, traverse velocity and number of passes. The treated coatings were observed by light and electron microscopy and the thickness, structure and surface morphology of the remelted layer were determined and correlated with the process parameters. Based on the first series of experiments, the e-beam settings leading to dense and smooth remelted layer of sufficient thickness were obtained. In this layer, a change of phase composition and a marked increase in hardness were observed.\n
|
| |
|
San Minn (or) An Artist who prefer creating and paintings than his life
Zeya, Pyin Nyar ; JANEČEK, Vít (advisor) ; VOJTĚCHOVSKÝ, Miloš (referee)
No one can control a painter artist’s freely thoughts and ideas and although his paintings were under the high pressure and banned by force, the artistic value of his materials never go down. So that I am writing this paper.
He, San Minn has broken out the mainstream of Burmese painting field, he never made business paintings as well. He keeps his belief on the art of paints and he is always finding for the new way to make his paintings. His materials are very different from other Burmese painter artists’ materials. His style is unique in Burmese paintings. So I can get a chance to study of his style, ideas, ways of thinking and his determination on the art works.
My paper can show a painter artist’s life who grew up under the military rule for 50 years and the situation and history of Burmese painting field. Then not only people who are studying the painting subject, but also other people can know about the subject of Burmese painting and field of artists. I dare say that my paper must be colorful and fruitful.
As a painter artist, it seems that he wants his audience to feel his materials but he rare to show his real life behind the pictures. For me, I can get a chance to know about his real life for my thesis paper.
xxxxxxxxxx
Thesis Statement
My thesis can be useful for everybody who is interested in Burmese contemporary art field.
This is the biggest chance to read about one of the most famous, important and significant artists and art movements of Burma. His paintings are reflecting his journey through over 40 years of censorship, but he was not afraid to tackle political and social issues.
Many of San Minn's art works are based on autobiographical, making sharp social commentary on the popular culture, social values and scenario circumstances where he has lived in.
xxxxxxxxxx
|
|
The Media Influence on Transformation of Democracy
Půlpánová, Barbora ; Pehe, Jiří (advisor) ; Slačálek, Ondřej (referee)
Mass media has always played the key role in democratic process. They are not only the indicator of its right functioning, but also the iniciator. From historical point of view is obvious, that technological progress and changes in the way of informing people were related to the political area. But with the increasing role of media, they changed their position from pure mediators of informations to the main actors of social and political life. The ‚old' media, such as newspapers, radio and television, are therefore partly responsible for commercialization of the public sphere and also for its depolitization. With contribution of the globalization effect on today's world, which causes besides other things the weakening of the nation state, there are only a little of the key democratic aspects left. Some find the solution in the ‚new' media represented by the Internet and social media, which are more interactive so they could get the citizens back to the game. And right in the increase of civic engagement see the theorists the potencial for creating a new democratic order based on high-level participation. KEY WORDS Mass media, Democracy, Public Sphere, Civic Engagement, Internet, Social media, Participative Democracy, Deliberative Democracy
|
|
Plasma spraying from liquids: plasma liquid interaction and coating build up
Tesař, Tomáš ; Mušálek, Radek ; Medřický, Jan ; Lukáč, František
Plasma spraying from liquid feedstocks is a rapidly developing field of thermal spraying since the coatings prepared from liquids exhibit some unique features, such as high hardness, thermal shock resistance or low thermal and electric conductivity. The key factor influencing the final coating character and properties is the input material which may be in the form of a suspension or a solution. Parameters of the selected suspension (solids concentration, viscosity, surface tension, chemical composition, etc.) or solution (concentration, etc.) determine its interaction with the plasma jet which strongly influences the coating buildup. This proceeding introduces the problematics of the interaction between the liquid feedstock material with the plasma jet and presents the way of evaluation of the coating buildup.
|
guest ::
