|
|
The possibility of using admixtures for waterroof concrete
Roháček, Lukáš ; Voves, Jiří (referee) ; Hubáček, Adam (advisor)
Bachelor thesis is mainly focused on additions, that have impact on water impermeability and other properities of fresh and hardened concrete. This issue is also described in short section, which is took from foreign reaserch. Thesis further discusses about the standards and regulations that determine, what properties should have waterproof constructions. Experimental part is showing influence of fly ash, slag and silica fume on conzistency, hydratation heat development, strenght, water impermeability, frost resistance and volume changes of the concrete.
|
|
|
Civic amenities building
Baroň, Alexandr ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The first part of this diploma thesis is to design an energy-efficient hotel with restaurant and car parking. The second part is also to create an assessment of the energy performance of the building and usage of energy from renewable sources. Hotel is designed with the idea of „smart buildings“ which means, that all the technological background is controlled by the main computer, which also harvests data to achieve a minimum energy use and financial demand and maximum comfort and safety at the same time by controlling the connected technology. By placing on a sloped terrain in the center of Brno, the basement floor can be used as car parking. The roof of this building is flat, green, with modifications for placing solar panels, whose design is part of this work. The third part of this diploma thesis is the spatial acoustics of the conference room on the first ground floor.
|
|
|
Apartment building
Peterková, Marta ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The topic of this bachelor's thesis is the design and elaboration of project documentation for an apartment building in city of Hodonín. It is an alone standing rectangular four floor building with one underground floor. In the basement are located garages with eight parking places and one technical room. On the first floor there is a part of technical facilities: room for bicycles, drying room and two apartments. There are a total of ten apartments on the upper floors. The second and third floors are almost identical. On the fourth floor there are two apartments with a terrace. The roof on the fourth floor is designed as a single skin flat roof. The basic structure and basement walls are designed from waterproof concrete. The vertical walls on the upper floors are designed from ceramic masonry. The building is insulated with a contact insulation system. The entrance to the building is from the south side of the plot. There is a walking area on the plot, as well as an access road to the garages and three other parking places before entering of object.
|
|
|
Polyfunctional residential building in Slatina
Náprava, Lukáš ; Klubal, Tomáš (referee) ; Brzoň, Roman (advisor)
The aim of the thesis is to design and evaluate a new multipurpose apartment building in Slatina. The object, which includes a parking lot, will be used for housing and recreational/sport purposes. The thesis also deals with basic evaluation of the object from the point of view of construction physics, fire safety and structural stability. The building is designed as a detached construction with graded floors. There is one ground floor and four elevated ones. The entire object is mirror-symmetrical on a transverse axis. The ground floor is designated to include a storage area of the apartment building, mechanical rooms and sanitary facilities of the fitness centre. The fitness centre itself is located on the first floor, along with a gym, administrative area and two special-purpose apartments. The remaining floors are intended for housing purposes. Wall construction system has been chosen for the object. The ground floor is based on a foundation plate made of watertight concrete („bílá vana“) while the supporting system is constituted by reinforced concrete walls. All ceiling constructions are constituted by monolithic plates made of reinforced concrete. Peripheral and inner supporting walls of the upper floors are lined with ceramic blocks HELUZ. Inner communication network consists of prefabricated reinforced concrete staircase and an elevator shaft. Roof construction consists of a flat DUO roof and a green roof.
|
|
|
Construction technology project of polyfunctional building in Rosice
Pelc, Miloš ; Novotný, Michal (referee) ; Diaz, Yvetta (advisor)
The thesis deals with construction technology project of polyfunctional building in Rosice. The parts of the thesis are the construction technology study, the assessment of transport realations, the proposition of mechanical composition and occupational health and safety (OHS/OH&S). The thesis also contains technological regulations for flat roof and white tank and control and test plans for them. There is also itemized budget with time schedule of structural work. Thesis also deals with comparison of damp proof membrane and waterproof concrete.
|
|
|
Office building with retail space Žilina
Hubocká, Zuzana ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
Master project is dedicated to design nearly zero-energy office building with retail spaces in Žilina. The first part deals with architectural – building design. Building is designed for the plot nr. 7011 with flat surface and there is no other building. The building has three above-ground floors and one underground floor. Retail spaces are on the ground floor. The building is constructed on foundation strips and pads. The building is made of combined load-bearing structural system of reinforced concrete columns and external walls. External load-bearing structures of above ground floors are designed from reinforced concrete and Ytong system supplemented by ETICS made of mineral wool. Underground walls are made from watertight concrete. Floor slab structures are made from reinforced concrete. The building is covered with green warm flat roof. The second part deals with building interior installation. The primary source of heat, coldness and hot water is the heat pump. Ventilation in the building is provided by heating, ventilating and air conditioning (HVAC) units. The third part of the thesis includes the design and assessment of the photovoltaic power plant in terms of economics and ecology. The project was carried out in the AutoCad system. All structures comply with the valid standards and regulations.
|
|
|
Detached house on a slope
Špás, Jan ; Pilík, Václav (referee) ; Utíkalová, Ivana (advisor)
The thesis deals with the design of the detached house as the design documentation for the construction. The building plot is located in Chrudim and it is steeply sloping over the Chrudimka river. Despite the height difference on the plot, the aim of the design was to maximize connection between the interior and the garden and at the same time place the office, garage and sauna inside. The house is three-storey building, where northern and eastern walls of two of these storeys are below ground level in order to take advantage of earth-sheltered houses. The entrace floor (ground floor) is covered with mono-pitched roof. The substructure is made of waterproof reinforced concrete with the vertical walls mostly made of the sand-lime blocks. The floor slabs are designed as monolithic reinforced concrete structures. The design documentation includes assessment in terms of fire safety and building physics.
|
|
|
Mixed-use building
Paštěka, Jakub ; Krupica, Roman (referee) ; Jelínek, Petr (advisor)
Diploma thesis is in form of building documentation for construction according to valid regulations. Designed mixed-use building is located in Zlín on plots no. 2865/3, 2865/22, 2865/23 and 2866. Building has shape of letter L, it has three above-ground floors and undergroud garage. Building has three separate parts – part with flats of sizes 3+kk and 4+kk, training centre and community centre. Each part has different number of above-ground floors. New building is detached house with maximum height 10,48 m. Object is constructed with ceramics blocks. It has ventilated facade and flat green roof. Ceiling is designed as cast-in-place reinforced slab. Material for foundations is waterproof concrete. Diploma thesis also includes assessment of thermal technology, acoustic and fire safety.
|
|
| |
|
|
Medical Center
Pospíšil, Václav ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The subject of my diploma thesis is the design of a new medical center MEDCEN in the area of the Jihlava hospital, on plot no. 4374/1. The total land area is 22 706 m2. The building has three aboveground and one underground floor. The vertical bearing structure consists of masonry ceramic elements, which are complemented by a monolithic, water-reinforced concrete in the underground floor. Vertical peripheral structures are equipped with thermal insulation system, in the above-ground floors with ventilated facade. The vertical load-bearing structures are made of prefabricated reinforced concrete panels and reinforced by reinforced concrete beams at the local load. The whole building is designed flat single-skin roof with a classic order of layers, where the main waterproofing layer consists of plasticized PVC foils. The layout of the building is divided into left and right wing, which connects the central central part. The entire underground floor is designed to be operational, there are parking spaces for employees, storage facilities and technical facilities of the building. Individual offices, nurses and waiting rooms are designed on all above-ground floors. In the central central part are designed sanitary rooms for visitors and employees. On the first floor is a pharmacy and X-ray examination room. On the third floor there are two office management offices and one-day surgery premises.
|
guest ::
