|
|
Grate Boiler for Coal and Bagasse Combustion - 200 t/h, 9.3 MPa, 520 °C
Bartůněk, David ; Ryšavý, Milan (referee) ; Skála, Zdeněk (advisor)
The object of the thesis is to design a grate boiler for bagasse and brown coal combustion with a heat output of 160 MW. Calculations of a flue gas stoichiometry are based on known element analyses of each fuel. The crucial part of the thesis includes designs of heat-exchanging surfaces, where the bagasse is considered as the main fuel while the brown coal is the spare one. Overall thermal balance and an actual boiler efficiencies are provided in last chapters. The boiler-outlet flue gas temperature is compared with the dew point temperature at the very end of the thesis. As a part of the thesis there is a design of the boiler attached.
|
|
|
Design of the steam generator for modular reactor
Černý, Marian ; Baláš, Marek (referee) ; Šen, Hugo (advisor)
Subject of this thesis is design of the steam generator for modular reactor. The dissertation consist of the theoretical part, where are described heat-exchangers and steam generators used in nuclear power plants. Second part contains theoretical calculations in the first approach (thermal, hydraulic and strenght calculation). In the next part are particular variants of steam generator selected. For the final variant are necessary calculations (introduced above) and drawings of selected parts are done. In the final statement is technical solution evaluated, and the parameters of the steam generator are compared with actually used steam generators.
|
|
|
Steam boiler burning wood 60t/h
Umýsa, Radovan ; Baláš, Marek (referee) ; Skála, Zdeněk (advisor)
This diploma thesis deals constructional and calculation design of the steam boiler 60t/h of clean burning wood. For the parameters of the stoichiometric calculations are carried out and enthalpy calculations of combustion and air. The collected data is then made It a diagram of air and flue gas. The following are the calculations with the heat balance calculations of losses and determination of the boiler thermal efficiency of the boiler. It is made of the combustion chamber design and its thermal calculation. After determining the main dimensions of the combustion chamber moves continue the calculation of boiler heating surfaces. At the end of the calculations are controlling the overall energy balance. Boiler output parameters as temperature, pressure and quantity of the steam.
|
|
|
Steam boiler with grate firing , burning coal or wood biomas 200 t/ h, 9,3 MPa 520°C
Čech, Jaroslav ; Hudeček, Mirko (referee) ; Skála, Zdeněk (advisor)
The aim of the work is the design of a grate boiler of 200 t . h-1 output, which will burn brown coal or wood chips. The work is divided into several parts. First, stoichiometric calculation and the calculations enthalpy of flue gases and air are performed. After calculating the heat balance and loss of the boiler was counted boiler efficiency. The design of individual heating surfaces is proposed and at the end are controlled the overall heat balance of the boiler. The calculation is supplemented by drawings.
|
|
|
Grate Biomass Boiler - 88 t/h; 9.6 MPa; 520 °C
Střecha, Josef ; Hudeček, Mirko (referee) ; Lisý, Martin (advisor)
This master's thesis deals with the design of stoker-fired boiler for combustion of biomass. The main points of work are stoichiometry calculation of combustion, determining the dew point of flue gas, calculation of losses, which ones serves for determination of boiler efficiency, dimension design and detail calculation of thermosetting surfaces. In the last chapter is numbered total balance and real thermal efficiency of boiler.
|
|
|
Steam boiler with grate firing burning wheat straw
Křivák, Petr ; Kohout, Přemysl (referee) ; Lisý, Martin (advisor)
The aim of the thesis is the design of the steam grate boilers of 40 t/h for straw burning. The required parameters are generated steam temperature 420 ° C and a pressure of 5.5 MPa. The specified fuel is cereal straw with a calorific value of 9.5 MJ/kg. The calculation is made from the stoichiometric calculation of elemental analysis, to calculate the individual dimensions and heating surfaces of the boiler.
|
|
|
The membrane wall of the boiler with an advanced flow control
Češla, Martin ; Tomáš, Zdeněk (referee) ; Tomáš,, Zdeněk (referee) ; Ing.Tomáš Zdeněk (referee) ; Pospíšil, Jiří (advisor)
The master thesis deals with hydraulic characteristics of once-through boilers and describes the problems which may arise during the flow of water through the evaporator. Especially the formation of aperiodic instability of the evaporator and hydraulic uniformity amongst every steam generating tube. The thesis describes parameters, which cause these problems, and solutions how to deal with them. The calculation has been done for evaporator of the boiler called K2 located in power station in Chvaletice.
|
|
|
Heat pump
Klíma, Martin ; Kloss, Ondřej (referee) ; Kaplan, Zdeněk (advisor)
Bachelor thesis describes and characterizes the heat pump. Summarizes the various types of heat pumps in terms of energy production, principles of their function and description of the differences between different types of compressors, use of refrigerant and its future development. Finally, here is my own view given the heat pump, which I prefer.
|
|
|
Direct cooling systems in food processing plants
Kotásek, Petr ; Vlček, Petr (referee) ; Formánek, Marian (advisor)
Diploma thesis deals with direct cooling systems in food processing plants. The work focuses on the description of the components of the refrigerant cycle, with emphasis on the choice of refrigerant. The result is a design of direct cooling system in the food factory in the variants with refrigerant R404A and R717. The work describes the advantages and disadvantages of various options. The work includes an experimental section which deals with the measure-ment and processing of the actual values of the refrigerant cycle and the comparison of two cold sources.
|
|
|
Boiler for Brown Coal Combustion
Pavlo, Matej ; Hoffman, Pavel (referee) ; Skála, Zdeněk (advisor)
The aim of the master’s thesis is thermal calculation and dimensional design of boiler of 235 t/h which burns brown coal. The work is divided into several parts. In the first part, stoichiometric calculation and the calculations enthalpy of flue gases and air are performed. After calculating the heat balance and loss of the boiler, the boiler efficiency is counted. In the next part, thermal calculation of combustion chamber is calculated. Subsequently, design of the individual heating surfaces is proposed. Finally, the overall heat balance of the boiler is inspected. The calculation is supplemented by drawing of the boiler.
|
guest ::
