|
|
Design svítidla
Vacková, Romana
The content of this thesis is the design of table lamp made of wood material using LED technology in this light. The theoretical part contain basic information on lighting history and subsequently function of LED strips, their strengths, power options, colouring and the method of installation. It was necessary to survey contemporary table lights on the market before own design. In the area own design it is described the procedure in the design which is accompanied by pictures of sketches, 3D models and test models. The final design is presented in 3D visualization.
|
|
|
Measurement of Operational Parameters of Light Sources
Motyčka, Martin ; Pavelka, Tomáš (referee) ; Krbal, Michal (advisor)
This semestral thesis is focused on description of operating parameters of light sources and their measurements. There are descripted light-technical, electrical and other parameters of light sources and methods of their measurements and evaluations. In tables there are ranges of fotometric quantities for most types of light sources. This thesis is also focused on functional explanation of photometric measuring instruments.
|
|
|
Near-field photometry
Kutý, Tomáš ; Baxant, Petr (referee) ; Škoda, Jan (advisor)
This thesis is focused on the theoretical and practical introduction to the verification procedures used today for obtaining luminosity curves of lamps. The introduction acquaints readers with the photometric variables. Consequently, it is theoretically described procedure for constructing luminance curves by zonal flow and further familiarization with the near-field photometry. For the practical part was chosen several lights. These lamps were measured by luxmeter first from a very close photometric distance from lights, and then from large distance. The next step was to obtain pictures of luminaries in planes C 0 to 345 ° (with a step of 15 °) of the angle gamma from 0 to 180 ° (in steps of 5 °). The measured data were processed by zonal flow and through programs LumiDISP and Matlab. The partial result of this thesis is to verify whether it is possible to use the luminance analyzer for obtaining luminosity curves, it means, if the luminosity curve obtained through luminance analyzer will comply with the curves obtained through a luxmeter. Further work should ascertain the feasibility of acquired photographs lamps from a very close photometric distance could create luminosity curve for any location and distance from the observer to measured lamps.
|
|
|
Luminance scanning of luminaires and light sources
Ševčík, Ondřej ; Baxant, Petr (referee) ; Škoda, Jan (advisor)
Práce se zabývá měřením křivek svítivosti světelných zdrojů a svítidel konvenčními a nekonvenčními metodami. Úvodní část práce je věnována popisu zrakového systému a základních fotometrických veličin. Hlavní teoretická část je zaměřena na popis současných metod měření křivek svítivosti a nových metod měření pomocí jasového analyzátoru. Současně jsou pro jednotlivé metody uvedeny zdroje nejistot, které ovlivňují výsledky měření. Těžiště práce spočívá v návrhu metodiky měření křivek svítivosti z jasových skenů svítidla a následném ověření tohoto postupu vlastním měřením. Dále bylo provedeno srovnání naměřených výsledků navrženým postupem, s výsledky konvenčního měření na goniofotometru s luxmetrem.
|
|
|
Numerical Modelling of the Light Source
Pavelka, Adam ; Koňas,, Petr (referee) ; Kadlec, Radim (advisor)
The master’s thesis deals with photometry units used in light engineering. There are defined the methods of modelling the illumination systems, their advantages, disadvantages and possibilities of using. Furthermore, the thesis deals with modelling of two illumination systems by ray-tracing in programming environment of MATLAB. The master’s thesis describes the analysis of the problem and the program designing process. Acquired model results are then compared with the real measurements of both illumination systems which allow the discussion of the results and the deviations of the models.
|
guest ::
