|
|
Validity of Local Positioning System
Németh, Filip ; MPA, David Prycl, (referee) ; Hanák, Petr (advisor)
The aim of this presented thesis is to verify the validation of LPS, which runs on the principle of wave radiations, UWB technology in particular. The testing protocol verifies the precision of system functions in various places and two diferent altitudes of the pitch. The ultimate precision of monitoring was recorded in the middle of the pitch, vanishing to the sides. In a higher altitude, with no surrounding walls, the recordings from the middle of the pitch were nearly similar to the sides of it. The anchor altitudes of the mechanism affect the overall monitored results. In comparison, the accuracy of tag placed approximately in a plane of anchors was lower than tag placed in a vest of an athlete.
|
|
|
Monolithic multi-storey wall building
Vymazal, Jakub ; Šulák, Pavel (referee) ; Bažant, Zdeněk (advisor)
Final thesis with tittle: "Monolithic multi-storey wall building" is processeed as a project documentation according to valid assesment. The object is located in the city of Boskovice, 35 Hybešova street. Its ground plan dimensions are 52,8m x 12,5m. Total height of object is 22,3m including roof-wall, measured from the level of base chink. There are enclosed balconies on the south direction. Movement between floors is ensured by 2-flighted stairs. Object is It is made of reinforced concrete. It is designed as 6-floor bulding with a flat roof. The main supporting construction is created by system of walls and reciprocally asigned ceilings, which are sticked together. Walls are designed as pillars. The building is assigned to a belt bases. Module dimensions are 8,7m in longitudinal direction and 5,2m in transversal direction. Height dimension is 3,0m. The thesis is dealing with the 1st upper floor.
|
|
|
Static solution of cylindrical prefabricated retention tank
Červená, Adéla ; Strnad, Jiří (referee) ; Zich, Miloš (advisor)
This bachelor's thesis is focused on a static solution of cylindrical prefabricated retention tank. The calculation of internal forces is made by software SCIA Engineer. Reinforcement is designed according to the magnitude of the internal forces. The tank elements are assessed for the ultimate limit state and the serviceability limit state. Furthermore the stress in the foundation base is assessed and ground water is assessed too. Part of the thesis is drawing of structure, formwork drawing and reinforcement drawing of prefabricated elements.
|
|
|
Apartment building
Najbrt, Milan ; Šoulová, Eva (referee) ; Vlček, Milan (advisor)
The object of the project is a new apartment building in the cadastral area of the city of Brno, the city district of Líšeň. The building plot is of rectangular shape, the entrance to the plot is situated from the local bituminous road. The house is intended for permanent living of 17 persons in 4 apartments and one studio apartment. Part of the building is common areas for providing services to the residents of the house. The services provided a common laundry room, a workshop and a parking space for each apartment unit. The building has four floors (1st floor, 1st floor, 2nd floor, 3rd floor). In the basement there are operating rooms such as a garage with parking spaces, a laundry room, a workroom and a cellar. The architectural design of the house is conceived so that traditional natural materials (brick, stone, wood, metal) can be used in their natural color design. The project further solves the natural light in the central rooms of the building with the aid of light pipes.
|
|
|
Residential buiding with bussines part
Severa, Aleš ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
This thesis deals with the layout, construction, fire and thermal technical solution for residential building with business part. The residential complex is divided into four functional parts - underground garages, administrative, operational and residential part. This proposed building has four floors and a basement. The upper floor is sheltered by a flat roof. The constructional system is made of reinforced concrete columns and walls in the first two floors, as for the next floors the brick wall construction is used. The ceiling construction is a monolithic reinforced concrete panel with cross tension.
|
|
|
Memory monument from prefabricated elements
Růžička, Martin ; Bažant, Zdeněk (referee) ; Strnad, Jiří (advisor)
The bachelor‘s thesis is concerned with a design of a monument which is made of reinforced concrete. The monument is composed of eleven prefabricated segments located from each other in regular distances. The segments have got the same external dimension but they differ in the dimension of internal openings which create a dynamic interior for a person standing inside of the structure. The segments are fixed to the prefabricated comb-shaped foundation. The aim of this thesis is to design each segment and the foundation of the construction. It also includes the technical drawings of reinforcement of the selected segments, the foundation, drawing of the concrete connection of the foundations and drawing of the shape of the segments.
|
|
|
Design of the supporting structure of the elementary school
Vintrová, Tereza ; Huryta, Ladislav (referee) ; Zich, Miloš (advisor)
The diploma thesis deals with the design of the load-bearing structure of the main building of the primary school in the village of Hrušovany u Brna, followed by the assessment of selected parts of the structure. The building is designed as a monolithic skeleton based on foundation slabs, which, together with the basement walls, form a "white tank." The subsequent assessment focuses primarily on the foundation structures, walls, roof slab, selected columns, and the staircase. Computational models and the internal forces obtained from them were created using the SCIA Engineer software. The thesis includes a static calculation and drawing documentation. The thesis was conducted in accordance with applicable standards.
|
|
|
Reinforced concrete load-bearing construction
Kozumplík, Lukáš ; Kraut, Jan (referee) ; Šulák, Pavel (advisor)
The diploma thesis is focused on a structural analysis of a multi-storey office building. The Loadbearing structure is made of cast-in-place reinforced concrete. In the thesis there is analysed a selected floor slab, a column, a foundation pad, a part of loadbearing wall and a precast staircase. Computation of internal forces is carried out by computational software SCIA Engineer. The Results from the software are verificated via simplified manual method. Assessment of a structure is done according to valid standards and regulations.
|
|
|
Sewage absorbing well
Kulla, Lukáš ; Perla, Jan (referee) ; Strnad, Jiří (advisor)
The aim of this bachelor’s thesis is to determine the loads acting on the waste shaft of given dimensions and design the reinforcemen. Then assess the ultimate limit state and servicesbility. When calculating internal forces are applied manual calculation, which is then verified tabular values and static program based on finite element method SCIA Engineer. The structure is designed to complies with all requirements of technical standards CSN EN.
|
|
|
Construction technological project of sports hall construction
Tkáč, Jiří ; Vlčková, Jitka Laura (referee) ; Diaz, Yvetta (advisor)
The thesis deals with Komenského Street sports hall construction in Lysá nad Labem. Although partially dealing with construction of all parts, in detail it studies gym construction, focusing on time management, technology and resources of implementation. The thesis is divided into the drawing and text parts. The former includes site facilities design and building situation. The latter consists of the main part construction project implementation study, itemized budget, time schedule, technological regulations, inspection and testing plan for the implementation of the main construction part 1st floor reinforced concrete columns and walls, construction machines and mechanisms design as well as time and financial schedule.
|
guest ::
