|
|
Prediction of cutting forces and quality of surface when milling with high feeds
Mikel, Pavel ; Humár, Anton (referee) ; Píška, Miroslav (advisor)
Theoretical study describes force analysis and quality of surface when milling. In the experiment the emphasis is on determining forces and surface quality in milling in response to changes in feed rate. Especially determination of specific cutting force kc and cutting force Fc at materials from aluminium alloy AlSi9Cu3, titanium alloy Ti6Al4V and steel C45, the used tool was a milling cutter for high feeds. In the experimental section is furthermore contained statistical evaluation data which demonstrate a certain prediction changes of cutting load and surface roughness when changing feeds.
|
|
|
Machining of Titanium Alloys
Karásek, Jan ; Slaný, Martin (referee) ; Píška, Miroslav (advisor)
The main goal of this work is the analysis of manufacturing costs for the component of wheel´s blower. Followed by setting up the size of specific cutting force for milling operation of the titanium alloy Ti-Al6-Mo2-Cr2-Fe-Si, the used tool was a milling cutter which is made out of sintered carbide with conical and spherical face. The final values which are at intervals of 1500 to 1800 MPa were compared with the values of the Sandvik Coromant firm kc = 1690 MPa, for titanium alloy with the strenght in tension Rm = 1050 MPa.
|
|
|
Machining of titanium alloys
Kinc, Jiří ; Humár, Anton (referee) ; Píška, Miroslav (advisor)
This thesis describe titanium and titanium alloys from the perspective of charakter, production and use. Thesis gives information about difficulty connected with machining titanium by basic machining methods. Titanium alloy Ti6A14V was turned in practical part. Intention was to measure cutting force and specific cutting force.
|
|
| |
guest ::
