National Repository of Grey Literature 49 records found  previous11 - 20nextend  jump to record: Search took 0.03 seconds. 
Investigation of storage conditions influence on adhesion of rubber bushings
Kvapil, Štěpán ; Muroň, Aleš (referee) ; Kandus, Bohumil (advisor)
The theoretical part of the thesis is focused on research on vulcanization and post-vulcanization, i.e. the production of rubber and the connection of rubber with metal using the latest technologies. This part serves as the theoretical basis for the development of the training base and the experimental part, which are part of the practical part. The training materials are serving for faster and more effective training of new staff and as a comprehensive set of information to the MAT center. The methodology of the manual is described in the main thesis and identical examples from this document are inserted in this thesis too. The experimental part focuses on the adhesion of rubber to the metal surface with subsequent evaluation. The whole problem from the preparation, post-vulcanization, tearing, through measurement to determination of the maximal storage life of sprayed rubber bearings is described.
Tack of textile coated with rubber blend
Mahel, Jindřich ; Petrůj, Jaroslav (referee) ; Kučera, František (advisor)
The theoretical part of the diploma thesis describes basic composition of the rubber stock and the methods used for its processing. It summarizes current knowledge about building tack. The experimental part of the thesis deals with the methods of accelerated aging proposal, which have been used for testing UV radiation, ozone, temperature and humidity effect on tack. After bringing two samples together by defined pressure, the tack was determined by T-peel test. Surfaces of the samples were characterized by scanning electron microscopy and infrared spectroscopy. The aditivation of the rubber stock was done in order to compare the effects of tackifiers on accelerated aging.
Test cell for ozone degradation of tires
Píza, Tomáš ; Veselý, Oldřich (referee) ; Brandejs, Jan (advisor)
This diploma thesis is occupy by assesment optimum method straining of tyres and then constructional concept of test cell for ozone degradation of rubber tyres with sizes from 13” to 15”. The final aim of this diploma thesis is construction of test cell which is based on choice of optimum method straining of tyres. The next output of this diploma thesis is concept of unit for ozone degaradation of tyres.
The manufacturing of shallow drawing part by rubber
Klepáč, Patrik ; Špaček, Jindřich (referee) ; Podaný, Kamil (advisor)
An object of this master thesis is the proposal of variants solving a manufacturing of required part and the selection right technology for single part production of required part from stainless steel 17240 (DIN 1.4301). At the first part of this thesis is briefly reviewed conventional forming and at rest of this thesis is closely reviewed the technology using the elastic tools (rubber, urethane), hydroforming technology and design of proper tool for required part. At the end of this work will be release economics estimation of fine technology and designed tool.
Influence of Mixing Line Parameters Adjustment on Mixture´s Properties
Smiřický, Jan ; Kučera, František (referee) ; Petrůj, Jaroslav (advisor)
The main goal of this thesis is to set optimal rubber mixture processing parameters in Barum Continental Ltd. Dispersion is one of the most important tire production steps. Although rubber mixing has been researched by several generations of experts, there are still some unexplored influencing variables. The automotive companies are keen on the reduction of emissions and therefore pushes the tire manufactures as they can contribute to emission reduction, as well as the enhancement of tire toughness. Enhancement of tire toughness causes the decreasing of rolling resistance. Higher toughness is exhibited by tires made of rubber filled by surface modified silica. Silica filled mixtures creates a three-dimensional net which is capable to coexist with a net made by vulcanization reaction. Other goals of this thesis are to understand the process and technologies used for mixing rubber mixtures designated for tire production.
Identification of material constants of rubber damping segments by modal analysis for railway rubber-resilient wheels
Šulc, Petr ; Šnábl, Pavel ; Pešek, Luděk ; Bula, Vítězslav
In this paper, an experimental and numerical modal analysis is described to assess two rubber compounds for the damping segments of a railway wheel. The subject of this comparison is materiál parameters such as Young’s modulus and loss factor for both compounds in the frequency range up to 6.5 kHz. From this comparison, an idea of the damping, stiffness and durability of these rubber segment materials inside these wheels is obtained.
Identification of material constants of new rubber damping segments from modal analysis of a railway rubber damped wheel
Šulc, Petr ; Pešek, Luděk ; Šnábl, Pavel ; Bula, Vítězslav
The aim of the modal analysis was to compare and identify the material constants of two proposed mixtures of rubber damping segments of a railway wheel. The modal analysis was carried out in two stages, experimentally and then numerically. The experimental modal analysis was carried on a rubber-suspension wheel for the two proposed rubber types of segment , designated 42809 and 46809. From this dynamic analysis, the natural frequencies and eignemodes of the wheel oscillations were obtained in the frequency bandwidth up to 6.5kHz. The material constants of the rubber were obtained by tuning the material parameters of the rubber segments, i.e. elastic modulus and special proportional damping coefficient, of the 3D FEM model of the railway wheel to the values of natural frequencies and damping ratios of the selected wheel natural vibration modes.
Influence of Mixing Line Parameters Adjustment on Mixture´s Properties
Smiřický, Jan ; Kučera, František (referee) ; Petrůj, Jaroslav (advisor)
The main goal of this thesis is to set optimal rubber mixture processing parameters in Barum Continental Ltd. Dispersion is one of the most important tire production steps. Although rubber mixing has been researched by several generations of experts, there are still some unexplored influencing variables. The automotive companies are keen on the reduction of emissions and therefore pushes the tire manufactures as they can contribute to emission reduction, as well as the enhancement of tire toughness. Enhancement of tire toughness causes the decreasing of rolling resistance. Higher toughness is exhibited by tires made of rubber filled by surface modified silica. Silica filled mixtures creates a three-dimensional net which is capable to coexist with a net made by vulcanization reaction. Other goals of this thesis are to understand the process and technologies used for mixing rubber mixtures designated for tire production.
The image of jungle in the novels The Vortex by José Eustasio Rivera and Heart of Darkness by Joseph Conrad
Schürgerová, Johana ; Poláková, Dora (advisor) ; Housková, Anna (referee)
The goal of this bachelor's thesis was to focus on the image of the rainforest in the roman The Vortex (La vorágine) by Jose Eustasio Rivera and then to compare it with the african jungle where is set the novelle Heart of Darkness by Johseph Conrad. The object of exploring were the effects of the environment on the characters,too. We observed changes in their behaviour and of their actions in the wilderness. In the end, we have shown the historical events that went down in history as gross abuses of human rights and, subsequently, we analyzed the motives of exploitation of both man and nature in both works.
History and present of bungee jumping in the Czech lands
Malimánek, Tomáš ; Kašpar, Ladislav (advisor) ; Jandová, Soňa (referee)
The theses deals with the history of bungee jumping in the Czech lands and describes its current form. The aim is to characterize the development of this phenomenon in the Czech context. The area of interest is broad-spectrum and the content of the work reflects several aspects, including physiological and psychosocial aspects. It also includes a summary and analysis of published publications. All information was consulted with the founder and pioneer of Czech bungee jumping. The conclusions show that since its beginnings, bungee jumping in the Czech context has not changed significantly in its essence, it has integrated into the Czech environment, and that today it occupies its place mainly in recreology. At the same time, there is a lack of publications focusing on the topic. KEYWORDS Bungee jumping, extreme sports, adrenalin 2

National Repository of Grey Literature : 49 records found   previous11 - 20nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.