National Repository of Grey Literature 397 records found  previous11 - 20nextend  jump to record: Search took 0.01 seconds. 
Design of a new production line
Hejl, Martin ; Jurová, Marie (referee) ; Juřica, Pavel (advisor)
This diploma thesis deals with the project of implementing a production line in a selected company dealing with the recycling of plastic waste and the production of rPET flakes as a secondary raw material for the production of plastic products. First, it deals with the description of the current state and the production process in the company, including the layout of the equipment, and then defines the requirements for the project by the management of the company and individual shareholders of the company. Defining the requirements for the project and at the same time the method of obtaining key information took place on the basis of in-depth interviews with the interested parties of this project, while a pilot design of the layout of the machinery was created, including a description of the technology and a flowchart of the required production process. The main content of the design part is the creation of a proposal for a possible implementation of the production line using a network diagram using the PERT method, which indicates that the duration of the project was calculated to be 106.6 days. Together with the network diagram of the project, an analysis and proposals for managing the risks of this project were prepared. At the end of the draft chapter, a financial analysis of the project's payback period was carried out, as the condition of a payback period of 3-5 years must be met in order for the project to be approved by the shareholders, which this project fulfilled in all three expected progress scenarios.
Converting PET bottles into printing filament
TOŠER, Martin
This thesis deals with the development of a machine for converting PET bottles into printing filament. The theoretical aspect of the thesis is mainly focused on the history of 3D printing, comparison of its methods and sustainability. An important part of the thesis is also a chapter on the motivation to create the machine and a research of available solutions. Based on the choice of suitable machine design, the machine was built and tested. Instructions for its construction were created and uploaded to the Printables portal.
Evaluation of Polymer Separation System Purifier N 1024 device efficiency
Duliková, Michaela ; Charvátová,, Michaela (referee) ; Čáslavský, Josef (advisor)
In this Diploma Thesis the recycling of the PET bottles in the company PETKA CZ, a.s. is under focus. Thesis describes the Italian technology AMUT designed for physical recycling of the PET bottles. The primary goal is the quality of the final recycled product, PET flakes, particularly in the context of undesirable admixtures such as PVC, other polymers and impurities. Due to the deteriorating quality of the PET flakes the equipment Polymer Separation System Purifier N 1024 has been tested, which had significantly reduced admixtures in PET flakes. As it turned out, the current procedures for solving problems with the PET flakes quality are no longer sufficient.
Use of R-material in asphalt mixtures with highly modified binder (HiMA)
Christ, Roman ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
The subject of this diploma thesis is paid attention to the influence of different dosing of R-material containing unmodified asphalt on the properties of asphalt concrete for abrasive layers (AC011 +) bonded with polymer highly modified asphalt (binder type HiMA). The properties of asphalt mixtures will be evaluated by means of the stiffness modulus test and the test of low-temperature properties by a uniaxial tensile test.
Waste horizon
Ochotná, Barbora ; Rypl Žabčíková, Ada (referee) ; Kristek, Jan (advisor)
The city is a place of accumulation, production and reproduction of production resources and consumption of goods, but waste typically accumulates outside it. It falls out of our horizon physically and mentally. The waste we produce changes the landscape and transforms the processes on earth without most of us visiting the "places of transformation". The project works with the idea of redirecting the final phase of the production chain back to the place of consumption by producing elements of public space from municipal waste. The presentation of waste leads to an awareness of its amount and degree of consumption. At the same time, waste becomes something much more ambivalent, possibly useful or even beautiful.
Risk Assessment of Textile Waste Management
Šindlerová, Vanesa ; Vymazal, Tomáš (referee) ; Hrabová, Kristýna (advisor)
This thesis deals with environmental risks arising from textile waste management. The introduction describes the context of textile problematics and maps the current situation of textile waste management. The main goal of this thesis is to determinate the environmental risks of low percentage of recycling. Recycling is one way of dealing with textile that mitigates the impact on the environment. For the evaluation of the causes and consequences of the researched problem are used Bow-tie analysis and Ishikawa’s diagram. The results of the work bring environmental risks resulting from the application of those selected methods. Part of the thesis is a questionnaire that evaluates the individual’s attitude to textiles. Results of the questionnaire reveals that not needed textiles are perceived as risk to the environment. At the same time, consumer behavior does not correspond with efforts to mitigate the identified impacts.
The utilization of the asphalt and concrete recycled materials to roads
Žďára, Zbyněk ; Šperka, Pavel (referee) ; Stehlík, Dušan (advisor)
This diploma thesis is divided into two parts, theoretical and practical. The is a review om the topic of recycled asphalt pavement and recycled concrete and their possible use in road construction in the theoretical part. The individual chapters deal with describing these materials, their production, and their use in construction layers of pavements. In the next chapters the attention is also paid to their problematic features and foreign experience using these materials in pavements. In the practical part, laboratory samples of recycled asphalt pavement and recycled concrete and their mixtures with cement are tested. The main purpose is to verify the applications of these mixtures of recycled asphalt pavement and recycled concrete in the bonded base layers of the pavement. Another purpose is to compare how these mixtures individual properties with different proportions of both components and different amounts of cement will be different. In the end, the two mixtures with the best properties was selected and the modulus of elasticity was experimentally determined for the possibility of replacing the currently used base layers and the economic evaluation of this design was made.
Possibilities of PLA material recycling for 3D printing purposes and influence on mechanical properties
Sedláček, Vojtěch ; Krčma, Martin (referee) ; Koutecký, Tomáš (advisor)
This bachelor thesis deals with the comparison of mechanical properties of 3D PLA prints during recycling. The recycling cycle proceeded as follows: the printed FDM test specimens from the PLA were pulverised and re-extruded into a filament. This process was repeated three times. Test specimens were tested in each cycle. Tensile tests were performed at room and elevated temperatures. The results show that there was a slight increase in strength. Measurement of the melt flow index showed degradation of the material and its depolymerization.
Use of FRP Composites as Reinforcing Material for Concrete
Kratochvílová, Denisa ; Prokeš,, Jan (referee) ; Bodnárová, Lenka (advisor)
Because FRP composites have high fiber strength and good durability, they are increasingly used for repairs, modernisation and reconstruction of concrete structures. In practice, however there is a risk of premature separation of FRP reinforcement from concrete. This can be avoided by appropriate selecting the fibers and the matrix and the appropriate shape of the reinforcement. The actual materials and consistency of FRP reinforcement with concrete are also covered by this diploma thesis.
ELIMINATION OF NEGATIVE PROPERTIES OF CONCRETE INDUCED BY THE USE OF RECYCLED AGGREGATES USING BASALT FIBERS
Fittl, David ; Nováková, Iveta (referee) ; Bodnárová, Lenka (advisor)
The thesis summarises information about recycled aggregates and basalt fibres, their interaction in composite material such as concrete. It focuses on the potential deficiencies and properties of concrete due to the use of recycled aggregates and on the possibilities of their subsequent elimination of their negative impact by the use of basalt fibres. It characterizes individual raw materials and their interaction in concrete. It includes verification of the properties of the individual sub-components and the resulting concrete itself. An assessment is made of the impact of the use of recycled aggregates on the properties of concrete (compresive strength, static modulus of elasticity, residual flexure tensile strength and others). The thesis discusses the question of whether the same or similar mechanical properties of concrete can be achieved with natural and recycled aggregates using basalt reinforcing fibres. The work provides for the possibility of settlement the values of these concrete parameters by using basalt fibres as a dispersed reinforcement in concrete. The recycled aggregates come from concrete company JARO AS in the north of Norway, where this work was conducted with the financial support from Erasmus+ at The Arctic University of Norway - campus Narvik.

National Repository of Grey Literature : 397 records found   previous11 - 20nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.