|
|
Steam boiler burning wood 60t/h
Umýsa, Radovan ; Baláš, Marek (referee) ; Skála, Zdeněk (advisor)
This diploma thesis deals constructional and calculation design of the steam boiler 60t/h of clean burning wood. For the parameters of the stoichiometric calculations are carried out and enthalpy calculations of combustion and air. The collected data is then made It a diagram of air and flue gas. The following are the calculations with the heat balance calculations of losses and determination of the boiler thermal efficiency of the boiler. It is made of the combustion chamber design and its thermal calculation. After determining the main dimensions of the combustion chamber moves continue the calculation of boiler heating surfaces. At the end of the calculations are controlling the overall energy balance. Boiler output parameters as temperature, pressure and quantity of the steam.
|
|
|
Design of heat exchanger for feeding heat water network 5,5 MW
Kubíček, Ondřej ; Moskalík, Jiří (referee) ; Baláš, Marek (advisor)
The Master thesis deals with the water-heater design for heat-exchange station with total power output 5,5 MW. The goal of the thesis is to make thermal and hydraulic calculation in the extent of the assignment and to develop a projection drawing of the heater along with a correct dimensioning of the shell and flanges. Thesis goals were met according to the assignment. The introductory part of the thesis briefly introduces to the heat-exchanger problematic and selected topics about heat-transfer. Following the basic mass and energy flows calculation inside the heater together with the thermal and hydraulic design determines the size of the heat transfer surface of pipes. After that the design calculations were made, whose results are used to determine the basic dimensions of selected parts and checking the accuracy of designed dimensions. In the last part of the work the design process is more described also with a more detailed description of selected parts.
|
|
|
Design HRSG 0,8Nm3/s, 450°C
Hatiar, Peter ; Kól, Přemysl (referee) ; Skála, Zdeněk (advisor)
This master’s thesis deals with the issue of design heat recovery steam generator. In the first part is realized calculation of stoichiometry and further the thermal balance of the boiler. The boiler was divided on the basis of thermal analysis in two heating surfaces that have been designed separately. The thesis also includes structural design and drawings of evaporator, economizer and their compilation.
|
|
|
Increasing the flow of cooling water for absorption cooling systems in the nuclear power plant Dukovany
Dvořák, Josef ; Suk, Ladislav (referee) ; Martinec, Jiří (advisor)
The thesis focuses on comparison of the original and the new solutions of cooling water circuit of the York cooling units for the purpose of cooling water flow increase for the absorption units in the Dukovany Nuclear Power Plant. The individual parts of the cooling units that were changed and modified within a reconstruction are described here. The aim of the work is also to process and compare the original and the new solutions of the cooling units and the cold source station from the available measured data. The data are processed into illustrative graphs and tables. Based on the obtained data we can observe the changes achieved by the reconstruction that have affected the effectiveness of the cooling units.
|
|
|
Condenser
Juráš, Filip ; Baláš, Marek (referee) ; Pospíšil, Jiří (advisor)
The Master´s thesis is dealing with water-cooled condensers and is splitted into three main parts. The first section provides general knowledge about condensers and heat exchangers, including the basic information of hydrophobic surfaces. These surfaces were used during verifying the impact of hydrophobicity on the heat exchange in water steam. The second section describes an experimental testing. It shows the difference between hydrophobic and nonhydrophobic surfaces and their impact on the heat exchange. The third and the last part of this thesis is design and calculation of water-cooled condenser. The design of the condenser is supported by drawings placed in attachement.
|
|
|
Steam Boiler with grate firing RDF 70t/h, 4MPa, 400°C
Mokriš, Lukáš ; Kohout, Přemysl (referee) ; Skála, Zdeněk (advisor)
The goal of this Master’s Thesis is to design a refuse derived fuel (RDF) fired steam boiler with 70 t/h processing ability. The assignment consists of requested output parameters of overheated steam and analysis of fuel components. This analysis was used for stoichiometric calculation of fuel. Furthermore, heat balance of the boiler was calculated, from which was determined the heat loss and the efficiency of the boiler. Individual designs and calculations of heating surfaces and boiler dimensions were carried out from requested output parameters.
|
|
|
Thermal treatment of waste with heat recovery
Strapko, Tibor ; Touš, Michal (referee) ; Pavlas, Martin (advisor)
Following bachelor‘s thesis deals with one of the possible way of waste treatment nowadays, thermal treatment, focusing on the facilities using this secondary raw materials as a renewable source of energy, WTE plants (incinerations plants in history). At the beginning this work focuses on waste and its history, diversification, characteristics, origin and reasons of their continual grow in production. For complexity and possibility of comparison this work slightly deals with 2 other most popular ways of waste treatment, as well: recycling and waste disposal. Next part concers with thermal treatment of waste, specializing on WTE plants and its processes. These can be devided into 3 different parts: incineration part, energy utilization part and flue gas cleaning part. Big attention is concentrating on energy utilization system, which inconsiderable affects general effectivity of this facilities. Finnaly, there‘s a numerical evaluation of energy flows in process of waste incineration and its processing into simple block and computational model.
|
|
|
Heat and stress analysis exchanger
Jedlička, Rostislav ; Šen, Hugo (referee) ; Baláš, Marek (advisor)
The main goal of master’s thesis is a propsal of the heat exchanger. The heat exchanger is double way of water side with the integrated air-vapor mixture cooler. Another aims are heat computation, heat loss computation, solidity dimensioning and selection of a material for a major selection. The last task is about detection of a vapor pressure trought the tube bundle.
|
|
|
Roman spa and sauna world
Křížek, Martin ; Velička, Jaroslav (referee) ; Dýr, Petr (advisor)
This thesis was prepared as an architectural study. In front of his graduate-seminar was a study on urban concept and the building Aquapark Brno - Zidenice hillside snakes. This thesis deals with the extension of the complex of Roman baths and sauna world. This is a two-storey building without a basement cubic shape. The proposal emphasizes the functionality of the service, interior design of the building and the overall expression
|
|
|
Design of Steam Inhaler
Zháňalová, Barbora ; Buganská, Tamara (referee) ; Fridrichová, Eva (advisor)
The goal of this thesis is design of steam inhaler. Which should respect functional, technical and aesthetic requirements. Work includes a study of the current situation in the market and development of new technologies in the field. The proposal deals with ergonomic and design aspects of the issue.
|
guest ::
