|
|
Infotainment unit for car
Musil, Roman ; Burian, František (referee) ; Ligocki, Adam (advisor)
The aim of this thesis is to design device which extended functionalities of on-board computer. The thesis first deals research of available single board computers and then selecting the appropriate touch screen, then analyzing the communication protocol which is used to communication between devices. Further, the thesis deals design architecture of system, creating a graphic interface and archiving telemetry data. Subsequently, deals creation of an interface that allows the visualization of archived data on a desktop computer. And finally, the implementation of online vehicle monitoring through the GSM module. The conclusion summarizes obtained information and the results achieved.
|
|
|
Design of the on-board system for a motorcycle
Ševčík, Jan ; Benešl, Lukáš (referee) ; Juráň, Radovan (advisor)
This work deals with the design and construction of an on-board computer for a vintage Jawa motorcycle. The design combines measuring sensors of our own design and those commonly available on the market, a main control board of our own design and assembly without interfering with the structure of the motorcycle. The system is considered for mounting on the Jawa 250/592 motorcycle, with some parts from other motorcycles, allowing for easier fitting. ESP32 from Espresiff is used as a microcontroller, which is placed in the tank of the motorcycle and displays the measured data on the LCD display. The system also allows you to control the entire motorcycle, such as enabling starting or turning on the lights
|
|
|
Infotainment unit for car
Musil, Roman ; Burian, František (referee) ; Ligocki, Adam (advisor)
The aim of this thesis is to design device which extended functionalities of on-board computer. The thesis first deals research of available single board computers and then selecting the appropriate touch screen, then analyzing the communication protocol which is used to communication between devices. Further, the thesis deals design architecture of system, creating a graphic interface and archiving telemetry data. Subsequently, deals creation of an interface that allows the visualization of archived data on a desktop computer. And finally, the implementation of online vehicle monitoring through the GSM module. The conclusion summarizes obtained information and the results achieved.
|
|
|
Racing Motorcycle On-Board Computer
Dokulil, Marek ; Šimek, Václav (referee) ; Crha, Adam (advisor)
The bachelor work is divided into three main sections. The first section deals with the description of the onboard computers available on the market that can be used on a racing motorcycle. The second part of this work focuses on the possibility of scanning speed engines, primarily gasoline, where the principles are described. In the third part there is described the design of the onboard computer and its construction. After reading the third part, the reader should be able to construct his/her own onboard computer according to that design.
|
|
|
Onboard computer for electric scooter
Stříteský, Vladimír ; Burian, František (referee) ; Kříž, Vlastimil (advisor)
The aim of this thesis is clarify construction of onboard computer for electric scooter. There is description of components, from which the electric scooter is built. Within this thesis a computer simulation of accelerating scooter is created. Based on the simulation three possible ways of controlling the electric drive were proposed. Then thesis describe parts from witch control system is composed. Onboard computer and support circuits are described in more detail and explained their functions. Description of the created software is in the final part.
|
|
|
Car board computer
Jelínek, Lubomír ; Bradáč, Zdeněk (referee) ; Macho, Tomáš (advisor)
This thesis is about design car board computer for car. It summarizes basic knowledge about engine control unit, car board computer and other car computers. It informs with diagnostic protocol OBD and his use for reading data from engine control unit. It describes specific solution modular car board computer. In conclusion there are designed procedures to enhance car board computer.
|
|
|
Universal Onboard Automotive Computer
Novohradský, Petr ; Crha, Adam (referee) ; Šimek, Václav (advisor)
This work includes the complete design of a prototype embedded system for displaying information from a vehicle. ELM327 chip is described and its basic use. Work also describes the development of the diagnostic socket for vehicles in European countries. Also contains a complete description of developing schematic, printed circuit board and firmware implementation. The thesis describes the use of realtime operating system in embedded system.
|
|
|
Board computer with GPS module for motorbike
Kaláb, Lukáš ; Vyskočil, Pavel (referee) ; Brančík, Lubomír (advisor)
This thesis describes the design and subsequent construction of a board computer for a motorbike, using a GPS module. Vehicle speed, distance travelled and the motor's rotations (RPM) are among the basic elements that are measured and shown. Furthermore, the mechanism allows one to measure and show the average consumption, the temperature of the surrounding environment as well as the motor's temperature, battery voltage, current time, and, with the help of the GPS module, the current GPS location of the vehicle, including altitude. The vehicle's entire journey can be saved to the memory card for further processing in a PC.
|
|
|
On-board Computer Unit with Testing for Cars
Špatenka, Jan ; Navrátil,, Vlastimil (referee) ; Dušek, Martin (advisor)
This thesis deals with the design and implementation of on-board computer unit with testing for cars. The first part focuses on circuit design concepts. Measurement data acquisition module uses standard OBD2. The module is designed based on the measuring circuit STN1110. Measuring module equipped with USB and JTAG communicates with the nearby devices. The control module is equipped with ARM microcontroller. The second part deals with the implementation of software for the microcontroller and the PC application. Finally, test results of the on-board computer implemented are presented.
|
|
|
Board computer for car
Lutera, Ondřej ; Holek, Radovan (referee) ; Macho, Tomáš (advisor)
This thesis deals with the design and implementation of car computer with multi-user mode and data recording. The measurement is performed by using a direct connection to the sensors and fuel injector of engine. The measured signals are processed and evaluated by Atmel Atmega128A microcontroller. Measured and recorded data are displayed on the graphical LCD.
|
guest ::
