|
|
Modification of polymeric materials by means of atmospheric plasma for biomedical applications
Kretková, Tereza ; Kylián, Ondřej (advisor) ; Hanuš, Jan (referee)
Polymeric materials are thanks to their advantageous volume properties and due to their relatively low price interesting for various applications. However, the possible use of common polymers is hampered by their low surface energy that leads to poor adhesion of subsequent coatings and limited ability to bind biomolecules. One of the strategies to increase the surface energy is modification of polymer surface by atmospheric plasma. In this study, we have investigated effect of atmospheric pressure dielectric barrier discharge generated in air on poly(ether-ether-ketone). We estimated plasma composition by optical emission spectroscopy as well as monitored temperature of the polymer during the treatment in order to verify applicability of this plasma source. Subsequently changes in morphology, chemical composition and surface energy of polymeric samples after the plasma treatment were determined. We proved that surface energy increases with increasing surface density of polar functional groups and that plasma causes changes in morphology of the studied polymer surface. We determined the etching rate of poly(ether-ether-ketone) in dependence on the supplied power. Optical properties remained unchanged indicating that also volume properties were not affected by plasma. Finally we tested the binding of...
|
|
|
Preparation of magnetic nanoparticles by hydrothermal method
Repko, Anton ; Nižňanský, Daniel (advisor) ; Buršík, Josef (referee) ; del Puerto Morales, Maria (referee)
Hydrothermal method of nanoparticle preparation, involving oleic acid, has received certain attention in the last years. However, the published works lack systematic approach to the subject, and the mechanism was not thoroughly investigated, so as to achieve a predictable outcome of the synthesis. The present work investigated the influence of composition of organic and water phase on the synthesis of cobalt ferrite (cobalt(II)-iron(III) oxide) and magnetite nanoparticles, and the mechanism of nanoparticle formation was proposed. Organic phase was based on pentanol, octanol or toluene, containing the precursor - metal oleate. Besides hydrophobic particles, it was even possible to directly prepare hydrophilic oleate-coated particles by using water phase with sodium oleate. Synthetic procedure was then simplified by a separate preparation of cobalt-iron oleate, which led also to a product of narrower size distribution and better phase purity. Size control in the range of 6-11 nm and a batch yield of ca. 500 mg was achieved. Attention was given also to the surface modification of the particles, thus imparting them hydrophilicity. Small di- or tricarboxylic acids were utilized, as well as carboxylmethyl dextran and titanium dioxide. Titanium dioxide required additional protection with...
|
|
|
Noise, Transport and Structural Properties of High Energy Radiation Detectors Based on CdTe
Šik, Ondřej ; Lazar, Josef (referee) ; Navrátil, Vladislav (referee) ; Grmela, Lubomír (advisor)
Poptávka ze strany vesmírného výzkumu, zdravotnictví a bezpečnostního průmyslu způsobila v posledních letech zvýšený zájem o vývoj materiálů pro detekci a zobrazování vysokoenergetického záření. CdTe a jeho slitina CdZnTe. jsou polovodiče umožnují detekci záření o energiích v rozsahu 10 keV až 500 keV. Šířka zakázaného pásma u CdTe / CdZnTe je 1.46 -1.6 eV, což umožňuje produkci krystalů o vysoké rezistivitě (10^10-10^11 cm), která je dostačující pro použití CdTe / CdZnTe při pokojové teplotě. V mé práci byly zkoumány detektory CdTe/CdZnTe v různých stádiích jejich poruchovosti. Byly použity velmi kvalitní spektroskopické detektory, materiál s nižší rezistivitou a výraznou polarizací, detektory s asymetrií elektrických parametrů kontaktů a teplotně degenerované vzorky. Z výsledků analýzy nízkofrekvenčního šumu je patrný obecný závěr, že zvýšená koncentrace defektů způsobí změnu povahy původně monotónního spektra typu 1/f na spektrum s výrazným vlivem generačně-rekombinačních procesů. Další výrazná vlastnost degenerovaných detektorů a detektorů nižší kvality je nárůst spektrální hustoty šumu typu 1/f se vzrůstajícím napájecím napětí se směrnicí výrazně vyšší než 2. Strukturální a chemické analýzy poukázaly, že teplotní generace detektorů způsobuje difuzi kovu použitého při kontaktování a stopových prvků hlouběji do objemu krystalu. Část mé práce je věnována modifikaci povrchu svazkem argonových iontů a jejímu vlivu na chemické složení a morfologii povrchu.
|
|
|
Optimization of thin films of metal oxide materials
Vítek, Jiří ; Šimonová, Lucie (referee) ; Šubarda, Jiří (advisor)
This thesis is focused on the description of the method of reactive sputtering of thin films. Currently, there are many ways how to create thin films and there are many applications of thin films in various industrial sectors. In this paper at the first are listed the issue of thin films, followed by an overview of the deposition techniques and of the chemical analysis of deposited thin films. It also describes the four-point measurement method of sheet resistance, mechanical test of adhesion and optical properties. At the end of the theoretical part are described the material composition of the deposited films. The goal of the practical part is to optimize the deposition process of the mixed layer of indium tin oxide (In2O3: SnO2) and contribute to the overall understanding of the influence of annealing on the layer. There were created six series of samples with that applied layers. First, the work focused on examining of the influence of annealing on the throughput in the whole measuring range, and then comparing the series due to the transmittance in the visible light spectrum. Furthermore were compared the value of sheet resistance of unannealed and subsequently annealed samples.
|
|
| |
|
|
Deposition methods of thin films using low-temperature plasma
GÜNZEL, Martin
This thesis is focused on the description of selected deposition methods of thin films using low-temperature plasma. Currently, many various technologies of thin films are developed and there are many applications in various industrial sectors. This thesis first gives a brief overview of deposition methods, plasma behavior during deposition and subsequent description of the selected methods of application due to the physical and chemical processes. They also discussed the advantages and disadvantages of the described coating technologies, and several examples of their use. The thesis should thus contribute to the overall view of modern coating technologies, their development and use currently, or possible use in the future.
|
guest ::
