|
|
Apartment building in the gap site
Doupovec, Vojtěch ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
The diploma thesis is focused on design of a monolithic reinforced concrete structure of an apartment building situated in a gap site. The foundation is designed on a foundation slab supported by piles, which together with the walls in the basement are made as a waterproofness concrete structure. It is a two-way wall construction system, made in a combination of masonry and reinforced concrete. The structure was assessed for the ultimate limit state and the serviceability limit state. Due to the requirement for waterproofness, the reinforcement was designed for non-force effects at an early stage. The work includes drawings of shapes and reinforcement.
|
|
| |
|
|
Cast-in-place tank of sewage plant
Sivčák, Jozef ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
The master’s thesis designs and checks the reinforced concrete tanks of sewage plant. Part of this thesis are also drawings. Tanks are designed as a watertight underground structure with aspect on standards and watertight function. Foundation slab and concrete walls were designed according to ultimate and serviceability limit states. The thesis includes design of reinforcement according to non-force effects in early stage. The structure is checked also to loss of equilibrium of a structure due to uplift by vertical actions from water pressure.
|
|
|
Family house
Purgat, Martin ; Zlámalová, Pavlína (referee) ; Švaříčková, Ivana (advisor)
Bachelor's prize dealing with the state of all states in the territory of the family house. The aim of the work is to design new layouts and adjust the branches designed in the presented products in internships in internships in internships of internships of internships. Subsequently, a static calculation of the city by contractions is made, which includes their dimensional and assessment of the ultimate limit state and usability. The individual bones of the ceiling located above the ground floor family houses are assessed for these conditions. Between the assessed contrasting jaws, a monolithic ceiling slab, beams, balcony, staircase and column, which is directly connected to the ceiling slab. The calculation of internal forces was demonstrably in the student versions of the Dlubal RFEM 5 program. It is part of the trade documents for the life of the mentioned elements. The export was proceeded according to valid standards and principles.
|
|
|
Static solution of a typical floor of an apartment building in Oslavany
Kurtin, Ladislav ; Šimek, Ondřej (referee) ; Zich, Miloš (advisor)
The bachelor thesis deals with the structural design of a typical floor of a residential building in Oslavany. The first part deals with the design of the ceiling structure above the second floor and the construction of the staircase. Using a slab model in SCIA Engineer 22.0, the internal forces on the floor slab were determined and the structure was assessed for ultimate limit state and serviceability limit state. The staircase was modeled with a member and slab model. Finally, a simplified assessment of the ceramic block masonry, specifically the intermediate bearing and perimeter walls, was performed. The bachelor thesis contains the structural calculation and drawings of the above mentioned elements.
|
|
|
Static solution of a floating concrete pier
Dorňák, Josef ; Nečas, Radim (referee) ; Zich, Miloš (advisor)
The bachelor´s thesis deals with the design of a floating concrete pier to be used for landing of helicopters of the Medical Rescue Service of the Czech Republic. The basic for the thesis was a study of the structure with plan dimensions, location on the river and a longitudinal section of the structure with elevation marks. The aim of the thesis is to desing a cross-reinforced slab and walls. In total, the structure consists of 8 identical components. To calculate the internal forces, a 3D model supported by an elastic substrate of calculated stiffness was created the Scia Engineer 22.0. Based on the outputs from the program, the flexural reinforcement was designed. Using non-linear calculation, the structure was assessed for serviceability limit state and the results were compared with the manual calculation of crack width. Handling and anchoring handles were also designed. At the end of the thesis, the connecting element was assessed and its reinforcement was proposed. The theoretical part, static calculation and drawing documentation are part of the thesis.
|
|
|
Static solution of the underground floor of an apartment building in Oslavany
Šafránková, Vendula ; Švaříčková, Ivana (referee) ; Zich, Miloš (advisor)
The subject of the bachelor thesis is the design and static analysis of underground carpark, which is part of an apartment building. This new development will be situated in Oslaveny. For the work was used drawings with a basic floor plan dimension and heights. The work includes a static calculation and drawing documentations. Static calculation is solved by a combination of manual calculation and software´s calculation. SCIA Engineer 22.0 program is used to calculate the internal forces. The design of the shear reinforcement is performed using Schöck Bole program. The static calculation includes design and assessment point-supported slab and columns and caps. The structure is designed according to valid standards ČSN EN.
|
|
|
Static solution of a typical underground floor of a tall building in Prague
Maršálek, Filip ; Šimůnek, Petr (referee) ; Zich, Miloš (advisor)
This bachelor's thesis deals with the static design of the ceiling structure of a high-rise building. The basis for the bachelor was drawing documentation with basic plan dimensions and heights. The aim of the work is to design a locally and point-supported ceiling slab in the form of a section of one floor, specifically the ceiling above the second underground floor. According to the assigned study, a board model was created in the SCIA Engineer program for the analysis of internal forces, on the basis of which the design of the bending reinforcement of the board was carried out for the limit state of bearing capacity. The design of the shear reinforcement is based on the internal forces from the 2D model and was carried out using the Schöck Bole program with manual verification of selected parts. Furthermore, crack widths were manually calculated and verified via SCIA Engineer. The last calculation was a non-linear deflection calculation in SCIA Engineer. The conclusion of the work was the design of a variant with headers and a comparison of both types of boards. The work includes static calculation and drawing documentation.
|
|
|
Design of the floor slab structure of a tall building
Vintrová, Tereza ; Šimůnek, Petr (referee) ; Zich, Miloš (advisor)
The bachelor thesis deals with the design of the ceiling structure of a high-rise building. The basis for the work was a study of the building with basic floor plan dimensions and heights. The aim of the bachelor thesis is to design a locally supported floor slab with a stiffening core in the middle, as a section of one floor, namely the ceiling above the tenth floor. According to the specified study, a slab model was created in SCIA Engineer to analyze the internal forces based on which the design of the flexural reinforcement of the slab to the ultimate limit state was carried out. The design of the shear reinforcement is based on the internal forces of the 3D model and was done using Schöck Bole with manual verification of the selected column. Non-linear calculation of the 3D model and manual verification of crack widths was used to assess the ultimate limit state. At the end of the work, the design of the circumferential rib variant and the comparison of the two types of slabs was carried out. The work includes a static calculation and drawings.
|
|
|
EVALUATION OF MASONRY BUILDINGS STATIC SECURING EFFECTIVENESS
Ledvoňová, Monika ; Šulák, Pavel (referee) ; Šulák,, Pavel (referee) ; Pospíšil,, Pavel (referee) ; Cikrle, Petr (advisor)
The theses looks into the evaluation of the efficiency of statical support of masonry buildings based on the measurements of changes to the crack width of the building. Monitoring of building is one of the main tools for their evaluation, in addition to the initial inspection and survey. In this way, monitoring is given in standards, for example in ČSN ISO 13 822 Bases for design of structures – Assessment of existing structures [1]. The first theoretical part is focused on defects and failures of brick masonry and methods of its monitoring, especially the measurement of displacements in cracks in masonry buildings with a special focus on the use of Hollan crack measurement gauge. The research part listed chronologically alternatives of structural support, both implemented during the construction works or afterwards. The comprehensive chapter then describes in detail wrought iron rods, this work deals with the testing of these rods in its laboratory part. The entire issue of practical part closely focuses on masonry estates built between the 1850s and 1950s and it is divided into two separate chapters. One part deals with laboratory tests of wrought iron rods, as one of the main reinforcing elements of historic masonry buildings that belong to the period in question. These elements were tested non-destructively (tests using a hand-held hardness tester and a hand-held X-ray analyzer) and subsequently also subjected to destructive testing, in which tensile tests of these rods were performed, including their joints. The subsequent practical part is focused on the complex monitoring of a selected brick building, which was damaged by bordering construction activities, specifically the construction of a multi-storey residence in its immediate vicinity. The results of this measurement enabled the design of a methodology for monitoring multi-storey masonry buildings, which completes and concludes the whole topic.
|
guest ::
