|
|
Electroerosion machining of materials used in the aerospace industry
Zubáková, Alexandra ; Mouralová, Kateřina (referee) ; Kalivoda, Milan (advisor)
This diploma thesis deals with the issue of electroerosion machining of materials used in the aerospace industry. The introductory part presents the layout of aerospace materials and the methods by which they can be machined. The next chapter describes the basic principles of EDM. The experimental part is focused on electroerosive cutting of NIMONIC 263 alloy. The greatest emphasis was placed on determining the influence of the cutting wire material on the rate of contamination of the surface layer of the workpiece. The quality of the machined surface was assessed depending on the used wire and the selected machining parameters.
|
|
|
Technology of wire electrical discharge machining
Brázda, Radim ; Krkavec, Martin (referee) ; Osička, Karel (advisor)
This master´s thesis deals with unconventional technology of wire electrical discharge machining. There are described the principles and essence of electrical discharge machining and the principles related to wire electrical discharge machining with emphasis on the application of this technology in terms of medium-sized engineering company. There is also described the complete assembly of technolgy wire cutting and machining on wire cutter Excetek V 650. Then in the work there are statistically evaluated parameters precision machined surfaces, specifically to the belt pulley 116-8M-130. At the end of the work there is the technical-economic evaluation that addresses the hourly cost of machining on wire cutter Excetek V 650.
|
|
|
Wire Electrical Discharge Machining
Barabáš, Martin ; Osička, Karel (referee) ; Sámelová, Vendula (advisor)
The work deals with the technology of electrical discharge wire cutting. The first chapter describes the principle of EDM machining with the basic description of the methods using this machining technology. The main part is concentrated on describing electric discharge wire cutting principle, used wire electrodes, the main parts of the machine, cutting conditions and benefits of this technology. The last chapter describes current trends in wire cutting, news from producers of wire cutters and possibilities of this technology.
|
|
|
Wire electrical discharge machining at production of tools for working of wood
Sedláček, Jiří ; Prokop, Jaroslav (referee) ; Osička, Karel (advisor)
My thesis is aimed at the application of wire electical discharge machining technology in the production of woodworking tools. All of this in the conditions of Vydona company. There is a theory of machining method plus a well-aranged division of cutter tools for wood in the introduction. The practical part describes in detail the procedur of cutting shaped plate out of tungsten carbide. As a result of the technical and at the same time the economic evaluation is an establishment of hourly rate for machine.
|
|
|
Trends in use of non-conventional technology for electrical discharge machining.
Mouralová, Kateřina ; Prokop, Jaroslav (referee) ; Osička, Karel (advisor)
The aim of this dissertation are future trends of electrical discharge machining in conditions of a small tool factory. In the introduction is presented the theory of non-conventional machining. The practical part is focused on valuation the current level of electrical discharge machining, the importance of the use in a tool Nástrojárna Ryšavý. It also compares the level of leading global manufacturers of electrical discharge machines and future trends of electro-discharge technology.
|
|
|
Technology of wire electrodischarge
Tichý, Štěpán ; Mouralová, Kateřina (referee) ; Osička, Karel (advisor)
This master’s thesis deals with technology of wire electrical discharge machining in theoretical and practical level. Theoretical part of the thesis explains in detail the principle of electrical discharge machining, describes functional parts and settings of a current wire EDM machines and also the possibility of using method for production of specific parts. Practical part of the thesis solves manufacturing of gearing on pinion manufactured by wire cutter EXCETEK V650 and statistically evaluates precision parameters on surfaces of the carriers taken by specific technological conditions with the same machine.
|
|
|
Rationalisation of electrospark machining
Janhuba, Tomáš ; Kalivoda, Milan (referee) ; Osička, Karel (advisor)
The diploma thesis deals with rationalization of EDM in the Schaeffler plant. The introductory part discuss about this type of machining, while its main purpose is the explanation of material removel process and conditions that the process must meet. It’s a summary of information that needs to be known before implementation of rationalization. The following part of the work describes an initial state of electroerosive workshop. It explains operation of the workshop or what machines are used there. In this part are also written the problems that the workshop have. After that there is part which is focused on the suggestion of solution and testing of that suggestions. The conclusions of that and whether the processess were racionalized are summarized in the technical-economic evaluation chapter and in conclusion chapter.
|
|
|
Electroerosion wire cutting of technical ceramics
Habovštiaková, Mária ; Mouralová, Kateřina (referee) ; Osička, Karel (advisor)
The presented diploma thesis deals with the issue of wire electrical discharge machining of SiSiC ceramics. The first part explains the principles of electrical discharge machining, describes the WEDM technology and presents the properties of the advanced ceramics. The second part consists of a detailed analysis of the cutting process of eighteen samples obtained with systematically changing process parameters. Based on the obtained results from EDX analysis, SEM electron microscopy and topography there was performed an analysis of the influence of process parameters on the cutting speed, surface roughness, kerf width and number of wire breaks with usage of the selected brass cutting wire. From the evaluated results it was possible to select a combination of parameters that ensured a stable machining process.
|
|
|
Electroerosion machining of materials used in the aerospace industry
Zubáková, Alexandra ; Mouralová, Kateřina (referee) ; Kalivoda, Milan (advisor)
This diploma thesis deals with the issue of electroerosion machining of materials used in the aerospace industry. The introductory part presents the layout of aerospace materials and the methods by which they can be machined. The next chapter describes the basic principles of EDM. The experimental part is focused on electroerosive cutting of NIMONIC 263 alloy. The greatest emphasis was placed on determining the influence of the cutting wire material on the rate of contamination of the surface layer of the workpiece. The quality of the machined surface was assessed depending on the used wire and the selected machining parameters.
|
|
|
Production technology for selected mold part
Mešina, Matej ; Ohnišťová, Petra (referee) ; Zemčík, Oskar (advisor)
The primary concern to be dealt with within the framework of this bachelor thesis is the concept of the variant of production technology of the mold core. The work deals marginally with the wire electrical discharge machining. Second chapter is concerned with the analysis of current production technology. Two new variants of the production technology process are introduced in third and fourth chapter. The last part of this work is dedicated to the techno-economical assessment of the proposed variants
|
guest ::
