|
|
Sports center
Jaroš, Patrik ; Vedra, Petr (referee) ; Drobeček, David (advisor)
The subject of my thesis is the design of new sports center in Hlučín. The sports center has three squash courts, a gym, spinning, two exercise rooms, a sauna and a bowling alley with a bar. The building is a basement, has two floors and is covered by a single casing flat roof. The structural system of brick Porotherm. The proposal respects the sports center city plan Hlučín existing street and buildings. Further emphasizes the layout including wheelchair access, collateral design for the static, architectural, energy conservation, fire safety and safety in use of the object.
|
|
|
Sports center with restaurant in Holěšov
Fridrich, Michal ; Melcr, Petr (referee) ; Fišarová, Zuzana (advisor)
The diploma thesis called ,,Sports center with restaurant in Holesov” is written in form of implementing project documentation and contains all requirements according to current laws. Proposed object is located on a plot 461/1 in Partyzanska street, Holesov. The object is separate building situated into north part of the plot. The designed building has two floors, no basement and is covered with flat roof. Foundations of the building are design as foundations strips with concrete slabs under column. Vertical carrier system, non-carrier constructions and separating constructions of the building contain ceramic clay block Porotherm. The carrier system is supported by reinforced concrete. Ceiling construction is made of ceiling panels Spiroll. The flat roof contains heat-insulation wedges and roof drains and overflows insurance for drainage. Main walls are covered with contact insulation system and the visual part of facade is made of facade blocks Cembrit Solid mounted to wooden grate which are attached to metal anchors. The object is divided into two main parts with shared entrance. First part is located in the ground floor and is designated for restaurant, bowling centre and back office including kitchen and bar. The other part of the building is designated for sports use. The ground floor contains two squash courts with facilities and first floor is divided into parts prepared for a gym and group lessons like spinning. This separate part has its own changing rooms and toilets with showers. The designed object is barrier-free. There is also a parking with 65 lots for vehicles. Four of them are designated for disabled visitors.
|
|
|
System for testing yarn quality sensors
Kubeš, Filip ; Knobloch, Jan (referee) ; Rubeš, Ondřej (advisor)
In the current situation, there are big demands for a textile production and the yarn quality. For that reason it is necessary to test the quality of the yarn, using sensors such as sensor Q30 of the Rieter company. The main goal of this thesis is to design and create a station for testing of the mentioned sensors in their development. Movement of the tested yarn is provided by three stepper motors made by the Standa Ltd. For connecting of the tested yarn and the sensor to the system, several metal parts were designed and created. Finally an app was designed to control the system. It was created using a C# programming language in the .NET framework in the Visual studio IDE. As part of the application, there were created libraries containing control commands for the controller. These libraries are usable for a different projects too.
|
|
|
Technology of emitter production
Šrotíř, Petr ; Císařová, Michaela (referee) ; Dvořák, Milan (advisor)
The goal of this bachelor thesis is to compare the technologies of production of given workpiece using the technology of spinning and deep drawing. The object of this project is an emitter and is supposed to be made of sheet metal. The workpiece will be deep drawn in the experimental drawing tool. An economic review by production of 1000 pieces will be worked out at the end of the bachelor thesis.
|
|
|
Sports center Hradec Králové
Pourová, Veronika ; Pobořil, Lukáš (referee) ; Petříček, Tomáš (advisor)
Sports center in Hradec Králové. The Sports center area accommodates various sport opportunities such as: squash, fitness area, climbing wall, sauna, massages and a possibility for other activities. The Sports center also includes refreshments – a with summer garden overlooking the grounds. It is two stories high, climbing wall is three stories high and squash is 1,5 m below the ground made with brick system Heluz with flat roof. There is a comfort for the visitors thanks to the air-conditioning in the object.
|
|
| |
|
|
Sports centre
Vančura, Jakub ; Sedlák, Radek (referee) ; Beneš, Petr (advisor)
The aim of this master thesis is proposal of a sport center building. The proposal consists of design of a detached building with room for climbing gym, sauna, massage room and also space for fitness, spinning and yoga. A bar with area for relaxing is a part of the building as well. The sport center has two floors and no basement. Due to the climbing gym, the second floor does not cover all disposition of the second floor. The support system of the building is skeletal. Part of the building´s roof is supported by steel truss frames with purlins, another part with solid panel trusses with purlins. The cieling is made of holoribs and reinforced concrete. The building is covered by single layer roof and has ventilated facade.
|
|
| |
|
| |
|
|
System for testing yarn quality sensors
Kubeš, Filip ; Knobloch, Jan (referee) ; Rubeš, Ondřej (advisor)
In the current situation, there are big demands for a textile production and the yarn quality. For that reason it is necessary to test the quality of the yarn, using sensors such as sensor Q30 of the Rieter company. The main goal of this thesis is to design and create a station for testing of the mentioned sensors in their development. Movement of the tested yarn is provided by three stepper motors made by the Standa Ltd. For connecting of the tested yarn and the sensor to the system, several metal parts were designed and created. Finally an app was designed to control the system. It was created using a C# programming language in the .NET framework in the Visual studio IDE. As part of the application, there were created libraries containing control commands for the controller. These libraries are usable for a different projects too.
|
guest ::
