|
|
Flat House
Jakubčík, Lukáš ; Novotný, Miloslav (referee) ; Novotný, Miloslav (advisor)
This bachelor´s thesis deals with the design of detached apartment building in Mikulov. The apartment building is set into the sloping terrain of the town of Mikulov and consists of one basement and four above-ground floors. From the first to third above-ground floors two residential units with balconies are designed, on the top fourth floor is one spacious residential unit with access to the outdoor terrace. The floors are serviced by a staircase supplemented by an elevator in a separate elevator shaft. The building uses a structural system of ceramic parts for vertical and horizontal structures, part of the foundation structure is made of lost formwork. The roof of the building is warm flat roof. The bachelor´s thesis contains project documentation for the construction.
|
|
|
Residence
Tippelt, David ; Skřek, Daniel (referee) ; Bantová, Sylva (advisor)
The subject of this bachelor's thesis is the design and elaboration of project documentation for the new construction of the Rezidence apartment building. The proposed building is located in Brno, in the Slatina district, and is located on land that is protected by an agricultural land fund, so it will be necessary to remove it from the ZPF. This plot is not located in a flooded or mined area. It is a detached building, which has four floors above ground and one underground floor. In the new building there are 12 residential units of 3 + kk and 1 + kk. In the basement there is a cellar for each apartment. In the first half there is a bike shed / carriage house, a cleaning room and a workshop with a warehouse, in the second half there are two technical rooms and a warehouse. On the first floor there is an entrance to the building, a laundry room with a drying room, a gym for the inhabitants of the house and two 1 + kk apartment units. On the second and third floor 4 units of size 1 + kk and on the top floor 2 residential units of size 3 + kk. From the second floor, each apartment has a balcony. These apartments are designed primarily for students, couples, or even a starting family. Each floor is connected by a three-armed reinforced concrete staircase, which is complemented by an elevator. The house is based on reinforced concrete foundation strips in combination with lost formwork. The vertical load-bearing structures in the basement are made up of lost formwork, the load-bearing structures above the ground are made of ceramic blocks, which are insulated with a ventilated façade and equipped with a Bond SK1 façade sandwich cassette. The horizontal load-bearing structures form a semi-assembled Porotherm system. The whole building is covered by a single-skin vegetation-retention flat roof. The new apartment building is designed to be very economical.
|
|
|
Family House
Stloukal, Ondřej ; Poláček, Lukáš (referee) ; Mazánek, Pavel (advisor)
The project documentation is prepared complete new build house with sales of spare parts in stock at the level of documentation for construction. House is designed for a family operation and store sufficient three employees. The building is designed as two rectangles connected together, where smaller firms are backgrounds, cellars and spaces for living, the greater the storage hall of spare parts. Built-up area of the house is 335m2.Střecha saddle is connected to the roof rack warehouse. Walling system is made by Heluz. The house is connected to the local road and utilities available. Design House is processed according to applicable standards and regulations for the country.
|
|
|
Apartment building
Karafiát, Filip ; Ladomirjáková, Jitka (referee) ; Sobotka, Jindřich (advisor)
The subject matter of this bachelor thesis is a project documentation for an apartment building’s construction in locality of Sadova, Mensikova street in Brno. The building has a basement with 13 parking spaces, a cellar and an utility room. There are four floors with 13 residential units above the basement. Part of the roof of a garage is made as a vegetation and second part is made as a terrace for flats. Main roof of the building is designed as a flat roof with a classic order of layers. The object is designed as monolithical. Garage is solved using columns and gutters, te residential part is solved with monolithic walls. Monolithic reinforced concrete slabs serve as a ceiling. The facade of the building is solved in the ETICS system, in some places, a ventilated facade with PREFA cladding is used.
|
|
|
The Rekonstruktion of Vyškov Rectory
Vaňurová, Tereza ; Hrabec,, Josef (referee) ; Vojtová, Lea (advisor) ; Kolář, Radim (advisor)
The basis of the thesis is the architectural study, prepared in the winter semester of the third year of bachelor study on the topic of rectory renewal in Vyškov. The task of the study was to find suitable urban, mass and functional solution of the existing building and adjacent land. The former rectory will be completely renovated and will mainly serve the original purpose for accommodation of dean and chaplain of the parish, meetings with believers, religious education, then there will be located a chapel, a workroom, studios and rooms for commercial rent. On neighboring land will be designed new city park with design stage. The new building will serve as a platform for the expression of art, which enrich the cultural life in Vyskov. Together with the park which serves as a multifunctional public space for relaxing. The work is divided into design studies, project documentation for construction and architectural detail.
|
|
|
Detached house with shop of cloths and haberdashery in Praha - Libuš
Dvořáková, Hana ; Kučera, Radim (referee) ; Štěpánek, Ladislav (advisor)
The bachelor thesis is a project of a multi-storey detached house with shop of cloth and haberdashery in Prague. The house is designed for two families. The shop is located in the 1st floor and is functionally completely independent of the operation of the residential part. The entrance of the shop is located on the main street. The entrance to the residential part is on side street. The rooms are oriented to the southwest. The building has walls made of ceramic blocks Porotherm, the ceiling and the stairs are monolithic reinforced concrete. The project was worked out in a training version of Autocad, the editions were processed in the Archicad program. During processing the emphasis was on architectural and layout solutions, static requirements and safety in use.
|
|
|
Family House Andovce
Tóth, Adrián ; Tichomirov, Vladimír (referee) ; Novotný, Miloslav (advisor)
The subject of this thesis is two-storey reinforced concrete basement house. The building plot is located in Andovce. The House is designed with the view of the location. The House will be used for living of a family of four members. The plan view of the House will be used for living of a family of four members. The plan view of the House is almost rectangular. The main entrance and the driveway to the House is at 1st floor level. The vertical walls are formed by a concret system with thermal insulation sheathed on both sides of wood chip boards. The ceiling structure is made of concrete beams. The detached house is covered with three shed roofs. The project was prepared by a computer program called Autocad.
|
|
|
Apartment building
Petřkovský, Lukáš ; Různar, Daniel (referee) ; Brukner, Bohuslav (advisor)
The subject of this bachelor thesis was the elaboration of an apartment building for construction stage. The proposed building, intended for collective housing, has 5 aboveground and one underground, partially basement floor, sunk into the sloping terrain of the plot. The building has 10 residential units and house accessories in the form of wellness facility. The building includes a a covered garage and outdoor parking spaces. On the first floor is the main entrance to the building, which is connected to the stairwell. From the stairwell you enter the individual apartments on 5 floors, wellness and technical facilities in the basement and covered garages. The apartments are designed for family living. The apartments have their own terraces from the 3rd floor. The dominant features of the building are protruding bay windows, that face south. The load-bearing structure consists of an prefabricated reinforced concrete frame, the ceiling structure in connection with prefabrication are made of pressed Spiroll panels. Foundation structures in the form of footing pockets connect prefabricated pockets and monolithic pockets,that are interconnected by sills. The infill masonry consists of thermal insulation blocks made of aerated concrete and acoustic sand-lime blocks. The building is then insulated with aerated concrete insulation. The last receding floor consists of a load-bearing structure made of aerated concrete and ceiling covered with monolithic reinforced concrete slab. Roof structures are designed as flat roofs with subsequent protective layers in the form of vegetation layers or aggregates.
|
|
|
Construction Technology Project Eye Clinic
Kašpar, Radek ; Selník, Petr (referee) ; Vlčková, Jitka (advisor)
Diploma thesis with construction technological project Eye Clinic. Contents of construction technological project are project engineering report, study of realization of main technological stages, engineering report of site equipment, technological regulation scaffolding and technological regulation insulation, inspection and test plan
|
|
|
Multifunctional building Brno - Líšeň
Rudolecká, Anna ; Fišer, Jiří (referee) ; Odvárka, Antonín (advisor) ; Pěnčík, Jan (advisor)
Bachelor thesis examines the creation of individual stages of project documentation to the study of the new building from subject AG035. The project deals with the new multifunctional house located in the district Lisen on the plot of land p. No. 4418/1 in the cadastral territory of Brno. The plat is situated on a sloping terrain. The project takes into account solving of surrounding areas as well, particularly in front of the area and connection to the public transport infrastructure. The mass of the object consists of four large blocks. Two of them are double-storey and two are single-storey. Blocks are interconnected by a glass tunnel, set on a symbolic pedestal. The pedestal is formed from two recessed floors of underground parking. The object is four-storey with two overground floors, which are mostly commercialized in the form of lettable spaces (e. g. for business, services, administration, etc.). Another part of the floors is used for technical and hygienic facilities. Two underground floors can be used by employees and visitors for car parking. Access to these floors is provided by a car lift, personal lifts and two stairs that connect all floors. The principle of the draft consists in the intention to place the mass of the building in the environment in the most sensitive way, so that the building doesn't act heavily, such as the surrounding settlement, but naturally follows the surrounding two-storey houses. That was achieved by the material solution of the above-ground floors. Five materials prevail in the exterior. Extensive vegetative roof, face concrete, two types of fitted facades (DuPontTM Corian® facade panels + glass panels with a sign symbolizing the crowns of trees and shrubs; other types of facade are vertical metal lamellae). Another predominant material is glass, which is used for the interconnection tunnel and the north and south facade.
|
guest ::
