|
|
Lighting unit for PCB production
Hybler, Matěj ; Harabiš, Vratislav (referee) ; Balogh, Jaroslav (advisor)
The thesis deals with the design of microcontroller driven lighting unit for the printed circuit board creation, using exposure of the applied layer of the photoresistive material. Main part is dedicated to design of the control unit, which can be operated either in automatic or manual mode, then its source code for microcontroller written in C language and the selection of suitable source of UV radiation. It also describes the design of the entire device, methods and results of individual measurements to determine the achievable quality of the resulting PCB.
|
|
|
Optimization of PCB Process Developing and Etching
Nerušil, Petr ; Zatloukal, Miroslav (referee) ; Starý, Jiří (advisor)
Bachelor´s thesis deals with photoresist developing and copper etching – these ones are the key operations in the double layer PCB production realised with pattern plating subtractive technique. Test pattern and a schematic diagram of the technological process for quality control in the practical part. Main part of this thesis is focused to operations of photoresist developing and to inspection and evaluation of photoresist width changes on test pattern during developing and etching including copper etch factor.
|
|
|
Laboratory Double Layer PCBś Production
Martykán, Lukáš ; Zatloukal, Miroslav (referee) ; Starý, Jiří (advisor)
The content of this bachelor‘s thesis is laboratory production of two-layer printed circuit boards. It includes analysis of basic materials and types of boards in general. The main part focuses on the manufacture of printed circuit boards using the panel plating. In particular, theoretical analysis technology drilling, hole plating, photo resist processing and etching. The practical part is examining the impact speed of drill bit rotation during hole drilling, electroplating copper holes. Microsections are realised and evaluated.
|
|
|
Nanoelectrodes for biophysical measurements
Márik, Marian ; Hrdý, Radim (referee) ; Hubálek, Jaromír (advisor)
The aim of the project is formation of nanoelectrodes on the silicon wafer surface by thin-film techniques combined with lithography and nanotechniques developed in LabSensNano. Project is engaged in lithography and in preparation of silicon wafers. Furthermore is proposed a brief proposal of electrodes, proposal of realization and current state of the experiment.
|
|
|
Application of Conductive Inks and Low Temperature Sintered Pastes in PCB Production
Kolek, Andrej ; Špinka, Jiří (referee) ; Starý, Jiří (advisor)
The present masters's thesis informs about the development and application of low-temperature sintering pastes in the manufacture and assembly of PCB components of the enclosing lead-free using nanoparticles of metals and their compounds. Lead-free brazing technology which s using in the present time, which has its drawbacks, however, and thus gaining other appropriate alternatives that seek to replace or further refined lead brazing. The introduction of the theoretical part inform about retrieval method of the type, composition and properties of low-temperature sintering pastes consisting of metal nanoparticles and their compounds. This section describes and explains the reaction mechanisms taking place during the sintering process. The end of the first chapter is dedicated to nanotechnology and production of nanoparticles and their compounds for the needs of the low-temperature sintering and possible related problems. Folowing section is devoted to examples of practitioners of the application and use of low-temperature sintering pastes and tests with which to assess the characteristics and quality of the related sintering conection. At the end of the thesis is a summary perspective and the use of low-temperature sintering technology nanoparticle past into the future. The experimental part is devoted to the application of conductive ink on the base of graphite for the production of 1V, 2V and 4V structures and their electroplated by the copper. There were created technological processes of 2V and 4V structures and test proposed methodologies resistance conductive theme to environmental influences. Filling pasta was tested in implementing 4V structure. There were made microsections various technological applications and their results were processed and evaluated.
|
guest ::
